Veritas NetBackup™ 5330 Appliance Hardware Installation Guide
- Hardware overview
- NetBackup 5330 compute node overview
- NetBackup 5330 compute node PCIe card configurations
- NetBackup 5330 compute node Ethernet port configurations
- NetBackup 5330 storage shelves and disk drives
- NetBackup 5330 cables and connectors
- Serial number locations
- Required reading
- Understanding hardware scenarios
- Understanding the NetBackup 5330 hardware installation sequence
- About IPMI configuration
- Other NetBackup 5330 product documentation
- Pre-installation requirements
- Hardware installation procedures
- Hardware installation scenarios
- Installing a primary shelf or an expansion shelf
- Installing disk drives into a primary shelf or an expansion shelf
- Installing the compute node
- Installing the SFPs into the Fibre Channel (FC) ports
- Connecting a NetBackup 5330 compute node to a primary shelf
- Connecting one expansion shelf to a primary shelf
- Performing a soft shutdown before adding a new expansion shelf
- Connecting new expansion shelves to existing expansion shelves and an existing primary shelf
- Connecting the power cords to the hardware
- Turning on the hardware and verifying operation
- Configuring the IPMI port from the NetBackup Appliance Shell Menu
- Accessing and using the Veritas Remote Management interface
- Hardware installation procedures for a NetBackup 5330 high availability configuration
- Appendix A. Adding the disk space of a new Expansion Storage Shelf
Accessing and using the Veritas Remote Management interface
The IPMI web interface is known as Veritas Remote Management interface. You can use Veritas Remote Management interface to log on to the NetBackup Appliance Shell Menu.
Note:
Alert configuration is not supported using the Veritas Remote Management interface. Alert configuration is supported from either the Settings > Notification > Alert Configuration menu in the NetBackup Appliance Web Console or the Settings > Alerts command view in the NetBackup Appliance Shell Menu. For details, see the Settings > Notifications > Alert Configuration section in the NetBackup Appliance Administrator's Guide or the Main > Settings > Alerts view commands section in the NetBackup Appliance Commands Reference Guide.
Before you use the Remote Management interface, the following prerequisites must be met:
The Remote Management interface must first be configured using the NetBackup Appliance Shell Menu.
At least one power cable must be connected to a functioning power source.
At least one user must be enabled to use the LAN channel(s).
To access and use the IPMI web interface from a remote computer
- Log on to a remote computer in the network and open a supported Windows browser.
- Enter the remote management port IP address that is assigned to the remote management port. The following page appears:
- Enter your login information. The default user name is sysadmin. The default password is P@ssw0rd, where 0 is the number zero.
Click Login.
- The Remote Control section lets you remotely monitor and control the server. Click Launch Console under the Console Redirection tab to launch the appliance NetBackup Appliance Shell Menu.
The following figure shows the interface for a 5230 or 5330 appliance.
- A JViewer application opens that enables you to remotely monitor and control the appliance. This application requires Java Runtime Environment (JRE) version 6.0 or later. Install Java (as needed).
Caution:
Starting with Java 7 update 45, you may receive a security warning when you launch the KVM remote console from the appliance IPMI port. The warning states that you do not have proper permissions and prevents appliance access from the IPMI port. For information about how to resolve this issue, refer to the following document:
https://www.veritas.com/support/en_US/article.100011121.html
- You can now access and log on to the NetBackup Appliance Shell Menu. Enter the user name and password for the appliance.
By default, the user name admin has the password, P@ssw0rd where 0 is the number zero.
