Veritas NetBackup™ Plug-in for VMware vSphere Client (HTML5) Guide

To install the NetBackup plug-in from the NetBackup master server

1. On the NetBackup master server, locate the following command:

   Windows: install_path\NetBackup\bin\goodies\vwcp_manage.exe

   UNIX, Linux: /usr/openv/netbackup/bin/goodies/vwcp_manage

2. On the master server, start vwcp_manage to begin plug-in installation.

   Note the following:

   • vwcp_manage is a Java GUI application. Make sure that your UNIX or Linux environment supports Java GUI applications.

   • If you run the command with administrator or root privileges, the command discovers the available vCenters and presents them in a list. Otherwise, you must provide the vCenter names.

   • The vwcp_manage command detects any existing version of the plug-in and lets you either upgrade it or uninstall it.

     See Uninstalling the NetBackup plug-in for vSphere Client (HTML5).

   • The vwcp_manage command does not uninstall the older NetBackup plug-in for vCenter (C# plug-in). The older plug-in continues to exist separately from the new one. You can uninstall the older plug-in as explained in the NetBackup Plug-in for VMware vCenter Guide for NetBackup 8.0:

     http://www.veritas.com/docs/DOC5332

     Note:

     Support for the older NetBackup plug-in for vCenter has been discontinued.

3. Registration begins with the End User License Agreement (click Accept):
   
4. On the following dialog, select the vCenter server from the Hostname or IP Address pull-down list, enter its credentials, then click Validate.

   Note:

   The vCenter credentials require the Extension privileges.

   See vCenter privileges for managing NetBackup plug-in installation.

   If the vwcp_manage command was not run with administrator or root privileges, you must enter the vCenter name (or IP address) manually.

   

   The registration utility determines whether the plug-in is registered on the vCenter. If the plug-in is not registered, the following dialog appears and shows the plug-in URL.

   

   The URL field is pre-populated with the plug-in package URL as hosted on the master server.

   To use a custom web server instead of the master server, select Use alternate plug-in package location and enter the full URL for the plug-in package.

   See Installing the vSphere Client (HTML5) plug-in from a NetBackup media server and plug-in package host (web server).

5. Click Register. A security alert appears:
   

   This security alert shows the identity of the web server that hosts the plug-in package. By default this web server is the NetBackup master server. The vCenter later downloads the plug-in from this server (the plug-in package host). Use this dialog to verify the identity of that server.

6. To allow the installation to proceed, click Continue.

   The following appears:

   
7. Click Close.
8. Log on to vSphere Client (HTML5). If you are currently logged on, log out first.

   The Veritas NetBackup option should appear in the left pane and in Shortcuts.

   

   If the Veritas NetBackup option does not appear:

   See The NetBackup plug-in is not shown in the vSphere Client (HTML5) interface even after registration.

9. To register the plug-in with another vCenter server, repeat this procedure starting at step 2.

   Note:

   For the vCenter servers that a VMware Platform Services Controller (PSC) manages, you only need to install the plug-in on one of the vCenter servers. The plug-in is then accessible to all the vCenters under the PSC.

10. If the NetBackup master server uses an external certificate, see the following topic:

    See Configuring the plug-in for an external certificate.

To install the NetBackup plug-in from the NetBackup appliance as master server

1. Log on to the appliance as a NetBackupCLI user and run the vwcp_manage command to install the plug-in.

   The vwcp_manage command is located here:

   /usr/openv/netbackup/bin/goodies/vwcp_manage

   For example:

   vwcp_manage --register - v vCenter.example.com - u vCenter_username - p password_file

   Where password_file is the path to a text file that contains only the password.

   Note:

   As a NetBackupCLI user, you can create text files in your home directory only: /home/nbusers

   For more information on the vwcp_manage command, see the NetBackup Commands Reference Guide:

   http://www.veritas.com/docs/000003214

2. Log on to vSphere Client (HTML5). If you are currently logged on, log out first.

   The Veritas NetBackup option should appear in the left pane and in Shortcuts.

   If the Veritas NetBackup option does not appear:

   See The NetBackup plug-in is not shown in the vSphere Client (HTML5) interface even after registration.

3. To register the plug-in with another vCenter server, repeat this procedure.
4. If the NetBackup appliance uses an external certificate, see the following topic:

   See Configuring the plug-in for an external certificate.