Please enter search query.
Search <book_title>...
Veritas NetBackup™ 5240 Appliance Hardware Installation Guide
Last Published:
2020-05-06
Product(s):
Appliances (Version Not Specified)
Platform: Veritas 5240
- Hardware overview
- Preinstallation requirements
- Installation procedures
- Appendix A. Adding one or more storage shelves to an operating appliance that does not have any storage shelves
- Appendix B. Adding storage shelves to an operating appliance that has at least one storage shelf attached
- Appendix C. Adding the disk space of additional storage shelves
Installing the storage shelf rack rails
Use the following procedure to install the storage shelf rack rails. Ensure that the best practises for installing the rack rails are followed.
See Storage shelf rack requirements.
To install storage shelf rails
- Identify the front and the rear of each rail. The following illustration shows the front of the left-hand and the right-hand rails. Red arrows show the pins that fit into the rack.
- Use the rack templates to align the rails with the rack holes. Be sure to use the same holes on each side of the rack. Fold the template at the dotted yellow lines to get accurate rail and rack matching.
- Place the left rail inside the rack. The rail holes should match the template. Extend the rail front and back to fit into the rack.
- Insert the screw in the front and in the back of the rail, as shown in the template. Do not over-tighten the screws.
- Repeat for the right rail.