Veritas NetBackup™ 5240 Appliance Hardware Installation Guide

Last Published:
Product(s): Appliances (Version Not Specified)
Platform: Veritas 5240
  1. Hardware overview
    1.  
      About the appliance and the storage shelves
    2.  
      Appliance disk drives
    3.  
      Appliance control panel
    4.  
      Appliance rear panel
    5.  
      Storage shelf disk drives
    6.  
      Storage shelf control panel
    7.  
      Storage shelf rear panel
    8.  
      Cables
    9.  
      About IPMI configuration
    10.  
      Product documentation
  2. Preinstallation requirements
    1.  
      Customer-provided environment and supplies
    2.  
      Storage shelf shipping container contents
    3.  
      Appliance shipping container contents
    4.  
      Enabling SAS tape-out functionality
    5.  
      Determining rack locations
    6.  
      Best practices for rack installation
    7.  
      Heat dissipation
    8.  
      Verifying SAS-3 cable length
    9.  
      Prerequisites for IPMI configuration on a 52xx and 5330
  3. Installation procedures
    1.  
      Installing the storage shelf rack rails
    2.  
      Installing the storage shelf into a rack
    3.  
      Installing the appliance rack rails
    4.  
      Installing the appliance into a rack
    5.  
      Attaching the storage shelf bezel
    6.  
      Understanding appliance and storage shelf connections
    7.  
      Connecting an appliance to one storage shelf
    8.  
      Connecting an appliance to more than one storage shelf
    9.  
      Connecting the network cables
    10.  
      Connecting the power cords
    11.  
      Turning on the hardware and verifying operation
    12.  
      Configuring the IPMI port from the NetBackup Appliance Shell Menu
    13.  
      Accessing and using the Veritas Remote Management interface
  4. Appendix A. Adding one or more storage shelves to an operating appliance that does not have any storage shelves
    1.  
      Overview
    2.  
      Preparing the appliance
    3.  
      Removing the appliance cover
    4.  
      Installing the Expansion Storage Kit components
    5.  
      Reinstalling the appliance into the rack
    6.  
      Storage shelf rack requirements
    7.  
      Determining rack locations
    8.  
      Installing the storage shelf rails
    9.  
      Installing the storage shelf or shelves into a rack
    10.  
      Understanding appliance and storage shelf connections
    11.  
      Connecting one storage shelf to an appliance
    12.  
      Connecting two storage shelves to an appliance
    13.  
      Connecting three storage shelves to an appliance
    14.  
      Connecting four storage shelves to an appliance
    15.  
      Connecting the network cables
    16.  
      Connecting the power cords
    17.  
      Turning on the hardware and verifying operation
  5. Appendix B. Adding storage shelves to an operating appliance that has at least one storage shelf attached
    1.  
      Overview
    2.  
      Moving the MSDP partition from a base disk to an expansion disk for optimum performance
    3.  
      Additional storage shelf scenarios
    4.  
      Installing storage shelves to an appliance that has at least one storage shelf
    5. Recabling to connect additional shelves
      1.  
        Connecting additional shelves to an appliance that already has one operating shelf
      2.  
        Connecting additional shelves to an appliance that already has two operating shelves
      3.  
        Connecting a storage shelf to an appliance that already has three operating shelves
  6. Appendix C. Adding the disk space of additional storage shelves
    1.  
      Adding the disk space of additional storage shelves from the NetBackup Appliance Shell Menu
    2.  
      Adding the disk space of additional storage shelves from the NetBackup Appliance Web Console
  7.  
    Index

Accessing and using the Veritas Remote Management interface

The IPMI web interface is known as Veritas Remote Management interface. You can use Veritas Remote Management interface to log on to the NetBackup Appliance Shell Menu or the Flex Appliance Shell.

Before you use the Remote Management interface, the following prerequisites must be met:

  • The Remote Management interface (IPMI port) must first be configured.

  • At least one power cable must be connected to a functioning power source.

  • At least one user must be enabled to use the LAN channel(s).

To access and use the IPMI web interface from a remote computer

  1. Log on to a remote computer in the network and open a supported Windows browser.
  2. Enter the remote management port IP address that is assigned to the remote management port. The following page appears:
  3. Enter your login information. The default user name is sysadmin. The default password is P@ssw0rd, where 0 is the number zero.

    Click Login.

  4. The Remote Control section lets you remotely monitor and control the server. Click Launch Console under the Console Redirection tab to launch the appliance NetBackup Appliance Shell Menu.

    The following figure shows the interface for a appliance.

  5. A JViewer application opens that enables you to remotely monitor and control the appliance. This application requires Java Runtime Environment (JRE) version 6.0 or later. Install Java (as needed).

    Caution:

    Starting with Java 7 update 45, you may receive a security warning when you launch the KVM remote console from the appliance IPMI port. The warning states that you do not have proper permissions and prevents appliance access from the IPMI port. For information about how to resolve this issue, refer to the following document:

    https://www.veritas.com/support/en_US/article.100011121.html

  6. You can now access and log on to the NetBackup Appliance Shell Menu or the Flex Appliance Shell. Enter the user name and password for the appliance.

    By default, the user name admin has the password, P@ssw0rd where 0 is the number zero.