Veritas NetBackup™ 5230 Appliance Hardware Installation Guide
- Overview
- Preparing for hardware installation
- Installing an appliance and 3U16 storage shelves into racks
- Cables
- Verifying hardware operation and configuring IPMI
- Appendix A. Adding 3U16 storage shelves to an operational NetBackup 5230 Appliance
- Appendix B. Adding 2U12 storage shelves to an operational NetBackup 5230 Appliance
- Appendix C. Adding new disk space to the appliance configuration
Product overview
Note:
The majority of this document explains the installation of a new NetBackup 5230 Appliance and optional storage shelves that ship at the same time. If you have an existing appliance and want to add new storage shelves, refer to the appendices at the end of this guide.
Up to four external storage shelves can be used to increase the storage capacity of the appliance.
The following storage shelves can be used with the NetBackup 5230 Appliance.
3U16 24TB storage shelves
3U16 36TB storage shelves
2U12 49TB storage shelves
Any combination of these shelves can be used, however they must be connected in a specific order. A total of four storage shelves is supported for each NetBackup 5230 Appliance.
Refer to the Veritas NetBackup 5230 Appliance Product Description for information about:
Storage capacities
Disk drive functions
I/O configurations