Veritas NetBackup™ Appliance 命令参考指南

描述

通过 IPMI 命令，您可以配置 IPMI 网络，以及使用 IPMI 连接管理访问设备的用户。使用 IPMI 命令可执行下列操作：

选项

在运行 IPMI Network Configure 命令之后，会执行以下过程。

Support> IPMI Network Configure 10.182.8.70 255.255.240.0 10.182.1.1
Network is configured successfully.

运行 IPMI Network Show 命令时，将显示以下信息。

Support> IPMI Network Show
IP Address Source    : STATIC
IP Address           : 10.182.8.70
Subnet Mask          : 255.255.240.0
Gateway IP Address   : 10.182.1.1

运行 IPMI Reset 命令时，将显示以下信息。

Resetting the IPMI disconnects all current IPMI users. 
Are you sure you want to reset the IPMI? [yes, no]: yes

如果其他用户不受影响，请键入 yes 并按 Enter 继续。显示以下消息：

-[Info] The IPMI is being reset...
-[Info] Wait for two minutes before attempting to reconnect to the 
IPMI console. If you cannot access the IPMI console, the appliance 
must be shut down and then restarted. First schedule a convenient time
for the shutdown, alert all users and shut down the appliance. 
Then disconnect all appliance power cables for 15 seconds, reconnect 
them and turn on power to the appliance.

如果其他用户受影响，请键入 no。提醒所有用户并计划在合适的时间进行重置。在预定时间再次运行 IPMI Reset 命令。

在运行 IPMI User Add <User_name> 命令之后，会执行以下过程。

Support> IPMI User Add abc
New password:
Confirm password:
Operation successful

在运行 IPMI User Delete <User_name> 命令之后，会执行以下过程。

Support> IPMI User Delete abc
User abc has been deleted successfully.

在运行 IPMI User List 命令之后，将显示以下信息。

Support > IPMI User List

User name         : Anonymous User
User privilege    : ADMIN 

User name         : sysadmin
User privilege    : ADMIN

User name         : root
User privilege    : ADMIN