Veritas™ Resiliency Platform 2.2 Deployment Guide

Last Published:
Product(s): Resiliency Platform & CloudMobility (2.2)
  1. Section I. Overview and planning
    1. Overview of Resiliency Platform
      1.  
        About Veritas Resiliency Platform
      2. About Resiliency Platform features and components
        1.  
          Resiliency Platform deployment infrastructure
        2.  
          Resiliency domain
        3.  
          Resiliency Manager
        4.  
          Infrastructure Management Server (IMS)
        5.  
          Replication Gateways
      3.  
        Planning a resiliency domain for efficiency and fault tolerance
      4.  
        Replication in a Resiliency Platform deployment
    2. Recovery to premises using third-party replication technologies
      1.  
        About recovery to premises using third-party replication
      2.  
        Using third-party replication for recovery to premises- an overview
    3. Recovery to premises using Resiliency Platform Data Mover
      1.  
        About recovery to premises using Resiliency Platform Data Mover
      2.  
        Using Resiliency Platform Data Mover for recovery to premises- an overview
    4. Recovery to AWS using Resiliency Platform Data Mover
      1.  
        About recovery to AWS using Resiliency Platform Data Mover
      2.  
        Using Resiliency Platform Data Mover for recovery to AWS- an overview
    5. Recovery to vCloud Using Resiliency Platform Data Mover
      1.  
        About recovery to vCloud using Resiliency Platform Data Mover
      2.  
        Using Resiliency Platform Data Mover for recovery to vCloud- an overview
    6. System requirements
      1.  
        Supported hypervisors for deploying Resiliency Platform virtual appliance
      2.  
        System resource requirements for Resiliency Platform
      3.  
        Network and firewall requirements
  2. Section II. Deploying and configuring the virtual appliances
    1. Overview of Resiliency Platform deployment
      1.  
        About deploying the Resiliency Platform virtual appliance
      2.  
        Downloading the Resiliency Platform virtual appliances
    2. Deploying the virtual appliances on-premises
      1.  
        Deploying the virtual appliance through VMware vSphere Client
      2.  
        Deploying the virtual appliance through Hyper-V Manager
    3. Deploying the virtual appliances in AWS
      1.  
        Deploying the virtual appliances in AWS
      2.  
        Prerequisites for deploying the Resiliency Platform virtual appliances in AWS
      3.  
        Uploading the OVA file using web-based method
      4.  
        Uploading the OVA file using command-line method
      5.  
        Creating Amazon Machine Image
      6.  
        Launching the instances of virtual appliances
    4. Deploying the virtual appliances in vCloud
      1.  
        Deployment prerequisites for recovery to vCloud
      2.  
        Uploading OVA files to catalog
      3.  
        Deploying the virtual appliances in vCloud
    5. Configuring the Resiliency Platform virtual appliance
      1.  
        About configuring the Resiliency Platform components
      2.  
        Prerequisites for configuring Resiliency Platform components
      3.  
        Configuring the Resiliency Manager or IMS
      4.  
        Configuring the Replication Gateways
      5.  
        Password policies for Resiliency Platform virtual appliance
  3. Section III. Setting up and managing the resiliency domain
    1. Setting up the resiliency domain
      1.  
        Setting up the resiliency domain
      2.  
        About the web console
      3.  
        Connecting to the Resiliency Platform web console
      4.  
        Getting started with a new Resiliency Platform configuration
      5.  
        Adding a Resiliency Manager to an existing resiliency domain
      6.  
        Removing a Resiliency Manager from a resiliency domain
      7.  
        Viewing the status of a Resiliency Manager in a data center
    2. Managing Infrastructure Management Servers
      1.  
        How Infrastructure Management Servers relate to data centers
      2.  
        Adding an IMS
      3.  
        Regenerating registration URL for an IMS
      4.  
        Removing an IMS
      5.  
        Modifying an IMS
      6.  
        Reconnecting the IMS to a Resiliency Manager
      7. Managing on-premises data centers
        1.  
          Adding on-premises data centers
        2.  
          Editing on-premises data centers
        3.  
          Removing on-premises data centers
        4.  
          Viewing data centers
      8. Managing cloud server configurations
        1.  
          Adding a cloud server
        2.  
          Editing the configuration of a cloud server
        3.  
          Refreshing the configuration of a cloud server
        4.  
          Removing the cloud configuration
    3. Managing NetBackup and NetBackup Appliances
      1.  
        About NetBackup and NetBackup Appliances
      2.  
        About protecting assets with NetBackup using Resiliency Platform
      3.  
        Using NetBackup - an overview
      4.  
        Prerequisites for integrating NetBackup with Resiliency Platform
      5. Adding NetBackup master server
        1.  
          Adding Resiliency Manager to NetBackup using a URL
      6.  
        Adding IMS to NetBackup master server as an additional server
      7.  
        Editing the NetBackup master server
      8.  
        Removing the NetBackup master server
      9.  
        Removing IMS from NetBackup master server
      10.  
        Refreshing the NetBackup master server
    4. Managing Veritas InfoScale Operations Manager Server
      1.  
        About Veritas InfoScale Operations Manager
      2.  
        Resiliency Platform support for InfoScale applications
      3.  
        Managing InfoScale applications using Resiliency Platform
      4.  
        Support matrix for InfoScale applications
      5.  
        Prerequisites for managing Veritas InfoScale Operations Manager server using Resiliency Platform
      6.  
        Adding a Veritas InfoScale Operations Manager server
      7.  
        Regenerating registration URL for a Veritas InfoScale Operations Manager server
      8.  
        Deleting a Veritas InfoScale Operations Manager server
      9.  
        Editing the details of a Veritas InfoScale Operations Manager server
      10.  
        Reconnecting the Veritas InfoScale Operations Manager to a Resiliency Manager
    5. Managing Resiliency Platform Data Mover gateway pairing
      1.  
        Viewing Veritas Replication Gateways
      2.  
        About Veritas Replication Gateway pairs
      3.  
        How Resiliency Platform Data Mover supports encryption for data replication
      4.  
        Creating a Veritas Replication Gateway pair
      5.  
        Removing a Veritas Replication Gateway pair
      6.  
        Viewing Veritas Replication Gateway pairs
      7.  
        Modifying encryption for a Veritas Replication Gateway pair
  4. Section IV. Adding the asset infrastructure
    1. Managing asset infrastructure
      1.  
        Asset infrastructure use cases
      2.  
        Adding asset infrastructure for Hyper-V virtual machines
      3.  
        Adding asset infrastructure for VMware virtual machines
      4.  
        Adding asset infrastructure for application discovery on Hyper-V virtual machines
      5.  
        Adding asset infrastructure for application discovery on VMware virtual machines
      6.  
        Adding asset infrastructure for application discovery on physical systems
      7.  
        Adding the asset infrastructure
      8.  
        Managing host assets
      9.  
        Managing Hyper-V assets
      10.  
        Managing VMware virtualization servers
      11.  
        Managing enclosure assets
    2. Preparing and maintaining host assets
      1.  
        About adding host assets
      2.  
        Prerequisites for adding hosts
      3.  
        Adding a Windows Install host
      4.  
        Installing the host package on a Windows host
      5.  
        Adding application hosts
      6.  
        Preparing host for replication
      7.  
        Removing hosts
      8.  
        Refreshing host discovery information
      9.  
        Uninstalling the host package from a Linux host
      10.  
        Uninstalling the host package from a Windows host
    3. Managing Hyper-V virtualization server assets
      1.  
        About Microsoft Hyper-V virtualization discovery
      2.  
        Prerequisites for Microsoft Hyper-V virtualization discovery
      3.  
        Adding Hyper-V virtualization servers
      4.  
        Removing Hyper-V virtualization servers
      5.  
        Refreshing Hyper-V virtualization servers
      6.  
        Configuring asset infrastructure for replication for Hyper-V virtual machines
    4. Managing VMware virtualization server assets
      1.  
        Prerequisites for adding VMware virtualization servers
      2.  
        VMware vCenter Server privileges required for implementing Resiliency Platform Data Mover
      3.  
        About near real-time discovery of VMware events
      4.  
        Setting up near real-time discovery of VMware events
      5.  
        Configuring the VMware vCenter Server to generate SNMP traps
      6. About adding a host for discovery of VMware servers
        1.  
          Adding a host for discovery of VMware servers
      7.  
        Adding VMware virtualization servers
      8.  
        Editing a VMware virtualization discovery configuration
      9.  
        Viewing the details of a VMware virtualization discovery configuration
      10.  
        Removing a VMware vCenter Server discovery configuration
      11.  
        Refreshing VMware vCenter Server discovery information
    5. Managing enclosure assets
      1. About the discovery host for enclosures
        1. Adding a discovery host
          1.  
            Add Discovery host panel options
        2.  
          Refreshing a discovery host
        3.  
          Removing a discovery host
      2. Configuration prerequisites for adding storage enclosures to an IMS
        1. EMC Symmetrix configuration prerequisites
          1.  
            Configuring the remote SYMAPI server for EMC Symmetrix array discovery
          2.  
            Verifying the configuration of a remote SYMAPI server
        2. EMC CLARiiON configuration prerequisites
          1.  
            Using Password Security file for CLARiiON enclosure
          2.  
            Verifying NaviSecCLI communication with CLARiiON enclosure
        3.  
          EMC VNX configuration prerequisites
        4.  
          NetApp configuration prerequisites
        5.  
          Hitachi configuration prerequisites
        6.  
          HPE 3PAR configuration prerequisites
        7.  
          IBM SVC configuration prerequisites
        8.  
          IBM XIV configuration prerequisites
      3. Adding storage enclosures
        1.  
          Configure Server panel options
        2.  
          Select Enclosure panel options to enable discovery for selected enclosures
      4. Adding RecoverPoint appliance for replication
        1.  
          Add RecoverPoint panel options for configuration details for RecoverPoint
      5.  
        Editing the discovery configuration for an enclosure
      6.  
        Removing the discovery configuration for an enclosure
      7.  
        Refreshing enclosure discovery information
  5. Section V. Managing users and global product settings
    1. Managing licenses
      1.  
        Managing licenses
      2.  
        About licenses
      3.  
        Viewing and managing licenses
      4.  
        Viewing the License Entitlement report
    2. Managing user authentication and permissions
      1.  
        Managing user authentication and permissions
      2.  
        About user authentication in the web console
      3.  
        About user permissions in the web console
      4.  
        Predefined personas
      5.  
        About limiting object scope for personas
      6. Configuring authentication domains
        1.  
          Options for authentication domain configuration
      7.  
        Editing authentication domains
      8.  
        Unconfiguring authentication domains
      9.  
        Showing domains on login screen
      10.  
        Configuring user groups and users
      11.  
        Assigning permissions to user groups and users
      12.  
        Adding custom personas
      13.  
        Predefined jobs that can be used for custom personas
      14.  
        Configuring Windows global user
    3. Managing service objectives
      1.  
        Managing service objectives
      2.  
        About service objectives
      3.  
        Viewing or customizing service objectives
      4.  
        Deleting activated service objectives
    4. Managing reports
      1.  
        Managing reports
      2.  
        About reports
      3.  
        Managing report preferences
      4.  
        Scheduling a report
      5.  
        Running a report
      6.  
        Viewing and managing report schedules
    5. Managing settings
      1.  
        Managing settings for alerts and notifications and miscellaneous product settings
      2.  
        Adding, modifying, or deleting email settings
      3.  
        Adding, modifying, or deleting SNMP settings
      4.  
        Downloading the MIB file
      5.  
        Setting up rules for event notifications
      6.  
        Adding, modifying, or removing Syslog server
      7.  
        Modifying the purge setting for logs and SNMP traps
      8.  
        Modifying the purge setting for reports
      9.  
        Modifying the purge setting for activities
      10.  
        Enabling or disabling telemetry collection
  6. Section VI. Updating or uninstalling the product
    1. Updating Resiliency Platform
      1.  
        About updating Resiliency Platform
      2.  
        About applying updates to Resiliency Platform
      3.  
        Prerequisites for a repository server
      4.  
        Downloading the Resiliency Platform update
      5. Using YUM virtual appliance as YUM server
        1.  
          Configuring the YUM repository server
      6.  
        Setting up the repository server
      7.  
        Adding a repository server in Resiliency Platform
      8.  
        Assigning a repository server in Resiliency Platform
      9.  
        Applying updates to virtual appliances using the console
      10.  
        Applying updates to virtual appliance using klish menu
      11.  
        Applying update on Resiliency Managers
      12.  
        Applying update for InfoScale environment
      13.  
        Applying updates to Resiliency Platform Data Mover bundle
      14.  
        Applying updates to the hosts
      15.  
        Removing an update from the repository server
    2. Uninstalling Resiliency Platform
      1.  
        About uninstalling Resiliency Platform
  7. Section VII. Troubleshooting and maintenance
    1. Troubleshooting and maintenance
      1.  
        Viewing events and logs in the console
      2.  
        Accessing Resiliency Platform log files
      3. Displaying risk information
        1.  
          Predefined risks in Resiliency Platform
      4.  
        About the Resiliency Manager services
      5.  
        Components of Resiliency Platform virtual appliance
      6.  
        Troubleshooting discovery of assets
      7.  
        About the frequency of asset information discovery
      8.  
        Troubleshooting the connection between Resiliency Managers in a resiliency domain
      9.  
        Troubleshooting removing a Resiliency Manager from a resiliency domain
      10.  
        Manually recovering the replication gateway
      11.  
        Using Veritas Services and Operations Readiness Tools to find a Unique Message Identifier description and solution
  8. Section VIII. Reference
    1. Appendix A. Virtual appliance security features
      1.  
        Operating system security
      2.  
        Management Security
      3.  
        Network security
      4.  
        Access control security
      5.  
        Physical security
    2. Appendix B. Using klish menu in Resiliency Platform
      1.  
        About klish
      2.  
        Using klish
    3. Appendix C. Tips on using the web console
      1. Tour of the Resiliency Platform web console screen
        1.  
          Menu bar options
        2.  
          Navigation pane options
      2.  
        Using Quick Actions for shortcuts to common tasks
      3.  
        Filtering and searching for objects in the web console
      4.  
        About settings in the web console
      5.  
        About the Resiliency Platform Dashboard
      6.  
        Web console icons
  9.  
    Glossary

Troubleshooting discovery of assets

When asset infrastructure is added to the Infrastructure Management Server (IMS), or when changes are made to the infrastructure, the IMS discovers and correlates the asset information and displays the information on the Assets page of the Resiliency Platform console. The discovery can take some time before the information is updated on the console. Until discovery is complete, some information needed to configure resiliency groups may be missing from the Assets page on the console.

See About the frequency of asset information discovery.

If changes have been made to the asset infrastructure, you can use the Refresh operation on the assets to speed up discovery so that updated asset information is displayed more quickly in the console. To use the Refresh operation, right-click the asset and select Refresh.

Note:

Occasionally, the data discovered from the Infrastructure Management server (IMS) may not be updated properly in the Resiliency Manager database. This situation may result in displaying incorrect information about the resiliency group state, replication state, and replication type. In such a case, refresh the appropriate assets in both the data centers.

If you are configuring replication using storage arrays in a VMware vCenter Server environment, you can use the following guidelines to speed up discovery or to troubleshoot information that is not being updated:

Table: Configuring asset infrastructure in IMS for storage arrays in VMware environment

Situation

Troubleshooting/best practices

Adding storage arrays as enclosures to IMS

Ensure that the storage arrays that are added to the IMS are the ones that provide storage to the ESX servers managed by the vCenter Server that is added to the IMS.

More than one IMS in data center

Ensure that the vCenter Server that is managing the ESX servers, and the enclosure providing storage to those servers, are added to the same IMS.

Refreshing the IMS after a change in infrastructure

Ensure that you use the Refresh operation on the correct vCenter Servers and enclosures where the change was made.

Refreshing the IMS after a change in infrastructure, where there is more than one IMS

Ensure that you use the Refresh operation in the correct IMS.

In the VMware and EMC SRDF environment, the general guideline is to add/refresh the enclosure before adding/refreshing the VMware vCenter Server.

Table: Configuring or refreshing asset infrastructure in IMS for VMware and EMC SRDF environment

Situation

Recommended sequence

You have not yet added the asset infrastructure.

Add the enclosure information in the IMS and let the discovery complete before adding the vCenter Server to the IMS.

You later provision new storage from an enclosure that is already configured in the IMS and mount datastores from the new storage.

Refresh the enclosure in the IMS, let the refresh task on the enclosure complete, and then refresh the vCenter Server in the IMS.

You provision storage from a new enclosure.

Add the new enclosure in the IMS and then refresh the vCenter Server after the enclosure discovery completes.

You are provisioning storage from an enclosure that is already configured in the IMS to new ESX servers managed by a vCenter Server.

Refresh the enclosure first, then add the vCenter Server to the IMS or refresh it if it is already added to the IMS.

In the VMware and NetApp SnapMirror environment, the general guideline is add/refresh the vCenter Server first, then add/refresh the NetApp enclosure.

Table: Configuring or refreshing asset infrastructure in IMS for storage arrays in VMware and NetApp SnapMirror environment

Situation

Recommended sequence

You have not yet added the asset infrastructure.

Add the vCenter Server to the IMS first and let the discovery complete before you add the NetApp enclosure.

You later provision storage from an existing NetApp enclosure and mount NFS datastores on ESX servers.

Refresh the vCenter Server first in the IMS, let the discovery complete and then refresh the NetApp enclosure.

You later provision storage from a new NetApp enclosure and mount NFS datastores on that ESX servers.

Refresh the vCenter Server first in the IMS, wait for the vCenter Server discovery to complete, and then add the new NetApp enclosure.

The recommended sequence for adding or modifying asset infrastructure for application discovery in the NetApp SnapMirror replication environment is as follows: Ensure that discovery of the hosts is complete before you add or refresh the NetApp enclosures.

More Information

Adding the asset infrastructure