Veritas NetBackup™ 5240 Appliance Product Description
- About the NetBackup 5240 Appliance
- NetBackup Appliance front panel disk drive configurations
- NetBackup Appliance control panel
- NetBackup Appliance rear panel
- NetBackup Appliance I/O configuration options
- NetBackup Appliance I/O configuration options
- About the Veritas 2U12 49TB Storage Shelf
- NetBackup 5240 Appliance and Veritas 2U12 49TB Storage Shelf cables
- Appendix A. Technical specifications and compliance standards
- Regulatory, compliance, and certification information
SAS tape-out adapter
The SAS tape-out adapter is used to connect external SAS devices to the NetBackup Appliance. The adapter is available for use with all configurations of the NetBackup Appliance.
Veritas reserves slot 8 of the appliance's riser assembly 3 for use with the SAS tape-out adapter.
The SAS tape-out adapter assembly includes a port for external SAS-3 device connections and an attached internal SAS-3 cable. The adapter's internal SAS-3 cable connects to Connector 2 on the RS3UC080 internal RAID controller, which is installed in slot 7.
Note:
The RS3UC080 internal RAID controller contains two SAS cable connectors: Connector 1 and Connector 2.
Connector 1 on the internal RAID controller connects to the appliance operating system and log file disk drives.
To purchase a SAS tape-out adapter for your appliance, contact your Veritas sales representative, or your Veritas Partner representative.
Table:
NetBackup SAS tape-out adapter | |
SKU Number | Description |
18820 | NetBackup APPLIANCE SAS TAPE OUT SAS3 SFF-8643 TO SAS3 SFF-8644 INTERNAL PLUG TO EXTERNAL RECEPTACLE CABLE CRU |