Veritas NetBackup™ 5240 Appliance Product Description

Last Published:
Product(s): Appliances (5240 3.0)
  1. About the NetBackup 5240 Appliance
    1.  
      NetBackup Appliance overview
    2.  
      Features and components of the NetBackup Appliance
    3. NetBackup Appliance front panel disk drive configurations
      1.  
        NetBackup Appliance disk drive LEDs
    4.  
      NetBackup Appliance front panel USB port
    5. NetBackup Appliance control panel
      1.  
        System Status LED states
      2.  
        Power button LED states
    6. NetBackup Appliance rear panel
      1. NetBackup Appliance I/O configuration options
        1.  
          NetBackup Appliance total I/O on-board and PCIe ports
        2.  
          Customizable I/O configurations by slot for existing NetBackup Appliance installations
        3.  
          Dual-port 10 Gb Ethernet card with SFP+ transceiver ports
        4.  
          QLE8442 dual-port 10Gb Ethernet/iSCSI capable card with SFP+ modules
        5.  
          QLE2562 dual-port 8Gb Fibre Channel host bus adapter with SFP+ modules
        6.  
          SAS tape-out adapter
      2.  
        NetBackup Appliance Network Interface Port locations and speeds
  2. About the Veritas 2U12 49TB Storage Shelf
    1. Veritas 2U12 49TB Storage Shelf overview
      1.  
        Usable appliance storage capacities
    2.  
      Veritas 2U12 49TB Storage Shelf front panel components
    3.  
      Veritas 2U12 49TB Storage Shelf control panel
    4. Veritas 2U12 49TB Storage Shelf rear components
      1. Veritas 2U12 49TB Storage Shelf I/O modules
        1.  
          I/O module Status LED location and conditions
        2.  
          I/O module SAS Activity LED location and conditions
      2. Veritas 2U12 49TB Storage Shelf Power Cooling Modules
        1.  
          Power Cooling Module LEDs
    5.  
      NetBackup Appliance and Veritas 2U12 49TB Storage Shelf connections
  3. NetBackup 5240 Appliance and Veritas 2U12 49TB Storage Shelf cables
    1.  
      Power cables
    2.  
      Network cable
    3.  
      Multi-Mode fiber optic cable
    4.  
      Twinaxial copper cables
    5.  
      SAS-3 cable
  4. Appendix A. Technical specifications and compliance standards
    1.  
      NetBackup Appliance and Veritas 2U12 49TB Storage Shelf technical specifications
    2.  
      Environmental specifications
    3.  
      Protocol standards
    4. Regulatory, compliance, and certification information
      1.  
        Product regulatory compliance
      2.  
        Product safety compliance
      3.  
        Product EMC Compliance - Class A Compliance
      4.  
        Product ecology compliance
      5.  
        Certifications / Registrations / Declarations
      6. Electromagnetic compatibility notices
        1.  
          FCC Verification Statement (USA)
        2.  
          ICES-003 (Canada)
        3.  
          CE Declaration of Conformity (Europe)
        4.  
          BSMI (Taiwan)
  5.  
    Index

NetBackup Appliance control panel

The front panel of the NetBackup Appliance includes a small panel that is attached to the right side of the device. System information is shown on this panel.

Figure: NetBackup Appliance control panel

NetBackup Appliance control panel&ProductName; Appliancecontrol panel&ProductName; Appliancecontrol panelLED descriptionscontrol panel LED descriptions&ProductName; Appliancecontrol panel&ProductName; Appliance

Table: NetBackup Appliance control panel LED descriptions

Label

Component

Description

A

System ID button with integrated LED

The System ID button toggles the integrated ID LED and the blue server board LED on and off.

The system ID LED identifies the system for maintenance when the it is racked with similar server systems.

See System Status LED states.

B

NMI button (recessed, tool required for use)

When it is depressed, the NMI button puts the appliance in a halt state, issues a non-maskable interrupt (NMI), and then triggers the non-maskable interrupt. All server data can be lost.

Veritas recommends that you do not enable NMI by pressing the NMI button.

C

H

NIC-5 Activity LED

NIC-6 Activity LED

The front control panel includes two activity LED indicators for each on-board network interface controller (NIC). NIC-5 represents network interface controller 5, while NIC-6 represents network interface controller 6.

When network links are detected on the controllers, the LEDs are activated and remain on. The LEDs blink when network activity occurs, and the rate at which they blink is determined by the amount of network activity that occurs.

D

System Cold Reset Button (recessed, tool required for use on non-storage models)

When depressed, the System Cold Reset button re-boots and re-initializes the appliance.

E

System Status LED

The System Status LED is bi-color indicator that uses the colors green and amber to display the current health of the appliance.

Two locations are provided for you to monitor the health of the system. You can find the first location on the front control panel, while the second location is located on the back edge of the server board. It is viewable from the rear of the appliance. Both LEDs show the same state of health.

See System Status LED states.

F

Power/Sleep button with integrated LED

The Power/Sleep button toggles the system on and off.

See Power button LED states.

G

Hard Drive Activity LED

The drive activity LED on the front panel indicates drive activity from the on-board hard disk controllers.