Veritas NetBackup™ 5240 Appliance Product Description
- About the NetBackup 5240 Appliance
- NetBackup Appliance front panel disk drive configurations
- NetBackup Appliance control panel
- NetBackup Appliance rear panel
- NetBackup Appliance I/O configuration options
- NetBackup Appliance I/O configuration options
- About the Veritas 2U12 49TB Storage Shelf
- NetBackup 5240 Appliance and Veritas 2U12 49TB Storage Shelf cables
- Appendix A. Technical specifications and compliance standards
- Regulatory, compliance, and certification information
NetBackup Appliance and Veritas 2U12 49TB Storage Shelf technical specifications
The following table provides technical specifications for the NetBackup Appliance.
Table: NetBackup Appliance technical specifications
Technical Specification | NetBackup Appliance |
---|---|
Rack information | 19" EIA standard The rack rails that are provided for the NetBackup Appliance are extensible to 36" (914mm). This distance is the maximum depth that is allowed between rack posts. If the distance between rack posts is longer than 36" (914mm) the rails and the appliance cannot be properly installed. |
Processor | Two (2) Intel® Xenon® E5-2630 v3 2.40GHz processors, or two (2) Intel® Xenon® E5-2630 v4 2.20GHz processors. |
CPU speed | 2.40GHz |
Cores | 16 (8 per processor) on E5-2630 v3, or 20 (10 per processor) on E5-2630 v4 |
System memory (currently supported) | 64 GB, 128 GB, 192 GB or 256 GB Note: When you purchase the first expansion storage shelf, the Storage Expansion Kit that comes with the storage shelf includes an additional 64 GBs of memory. After adding the first storage shelf and the memory, you can increase the appliance memory to 256 GBs by purchasing an additional 64-GB memory kit. |
Memory type and configuration (DIMMs) | DDR4 RDIMM 8 GB x 8 |
SAS RAID card installed in a PCIe riser assembly (Y/N) | Mezzanine card: Yes PCIe RAID card: Yes, for storage capacities over 27 TB |
RAID cache | 1 GB for the internal mezzanine RAID controller. 1 GB is also included on the external PCIe RAID controller when the first storage shelf is purchased. |
Usable MSDP and AdvancedDisk storage capacity (TB) | Appliance: 4 TB, 14 TB, 27 TB Each storage shelf: 49 TB Maximum configuration shipped from the factory: 322TB |
Maximum number of storage shelves | 6 |
1 Gb Ethernet ports | Up to 8 maximum |
10 Gb Ethernet ports | Up to 8 maximum |
8 Gb Fibre Channel ports | Up to 10 maximum |
Dimensions (IEC rack compliant) | Appliance:
Storage shelf:
|
Maximum weight | 23.26 kg (51.28 lbs) |
Shipping weight | 54 kg (118 lbs) |
AC power requirements | Appliance:
Each storage shelf:
|
AC power cable | Specification: IEC-60320-C14 to IEC-60320-C13, 10A/250V, Black, 4 ft The IEC-60320-C14 plugs into a Power Distribution Unit. The IEC-60320-C13 plugs into an appliance or storage shelf power supply. Note: If your power distribution unit is not compatible with the IEC-60320-C14 plug, then Veritas recommends that you purchase your power cable locally. Make sure the power cable meets or exceed the indicated power rating. See Power cables. |
AC Frequency range | 50/60Hz |
Typical power consumption | Appliance:
Each storage shelf:
|
Typical power consumption with a maximum of six connected external storage shelves | 1,590 watts (4.9 watts per TB) |
Maximum power consumption | Appliance:
Each storage shelf:
|
Maximum power consumption with a maximum of six connected external storage shelves | 3,980 watts (12.3 watts per TB) |
System cooling requirement (heat dissipation) | 240 watts (typical) - 819 BTU/hr 500 watts (maximum) - 1706 BTU/hr |
System cooling requirement with maximum external storage (heat dissipation) | 10,185 BTU/hr |
Operating voltage | 100V - 127 VAC 200V - 240 VAC |
Power conversion efficiency | Appliance:
Storage shelf:
|
Acoustic noise | Appliance:
Storage shelf:
|
The following table provides technical specifications for a Veritas 2U12 49TB Storage Shelf.
Table: Veritas 2U12 49TB Storage Shelf technical specifications
Technical specification | Description |
---|---|
Rack information | The rack installation height is the space occupied by a storage shelf in a rack cabinet. The height for the storage shelf is 3.5 inches, 88.9mm. The shelf fits into a 2U rack space. Install the storage shelf in a rack cabinet that is 19 inches (483mm) wide. The rack rails that are provided for the storage shelf are extensible to 36" (914mm). This distance is the maximum depth that is allowed between rack posts. If the distance between rack posts is longer than 36" (914mm) the rails and the appliance cannot be properly installed. |
Hot swappable components | Disk drives, power cooling modules, and I/O modules (Storage Bay Bridge (SBB) 2.1) |
Usable storage capacity (TB) | 49TB |
Maximum weight (fully populated) | 28 kg (62 lbs) |
Shipping weight | 52 kg (115 lbs) |
Dimensions | Height: 8.89cm (3.5") (approximately 2U) Width: 48.3cm (19") ICE rack compliant Depth: 60.2cm (23.7") |
Device types supported | Dual ported 12Gb/s SAS drives |
Maximum drives per enclosure | 12 |
Typical power consumption | 225 watts per storage shelf You can connect a maximum of four storage shelves to the &ProductName; Appliance. |
Maximum power consumption | 580 watts per storage shelf You can connect a maximum of four storage shelves to the &ProductName; Appliance. |
System cooling requirement (heat dissipation) | 225 watts (typical) - 768 BTU/hr 580 watts (maximum) - 1979 BTU/hr |
Operating voltage | 100V - 127VAC 200V - 240VAC |
AC Frequency range | 50/60Hz |
Power conversion efficiency | >80% @ 100V, >80% @240V (>30% load) |
Acoustic noise | 63 dBA |
Non-operational altitude | -300 to 12,192 m (-1,000 to 40,000 ft) |
Operational shock | 2g 11mSec half sine |
Non-operational shock | 25g 10mSec half sine |
Operational vibration | 0.21g RMS 5-500Hz random |
Non-operational vibration | 1.04g RMS 2-200Hz random |
Relocation vibration (Non-operational) | 0.3g 2-200Hz sinusoidal |