搜索 <book_title>...

Veritas NetBackup™ Appliance 命令参考指南

Last Published: 2019-11-04

Product(s): Appliances (3.2)

Platform: NetBackup Appliance OS

概述
1. 关于 NetBackup Appliance 命令行操作界面
2. 登录到 NetBackup Appliance 命令行操作界面
  1. 未配置设备上的命令限制
3. 使用 NetBackup Appliance 命令行操作界面
4. 关于 NetBackup Appliance 命令行操作界面命令视图
附录 A. Main > Appliance 命令
1. Appliance > Master
2. Appliance > Media
3. Appliance > Management
4. Appliance > Remove
5. Appliance > ShowDedupPassword
6. Appliance > ShowIdentity
7. Appliance > Status
附录 B. Main > Manage > FibreChannel 命令
1. Manage > FibreChannel > Clean
2. Manage > FibreChannel > Configure
3. Manage > FibreChannel > Reset
4. Manage > FibreChannel > Scan
5. Manage > FibreChannel > Show
6. Manage > FibreChannel > Statistics
附录 C. Main > Manage > HighAvailability 命令
1. Manage > HighAvailability > AddNode
2. Manage > HighAvailability > GetAssetTag
3. Manage > HighAvailability > RemoveNode
4. Manage > HighAvailability > Setup
5. Manage > HighAvailability > Status
6. Manage > HighAvailability > Switchover
附录 D. Main > Manage > Libraries 命令
1. Manage > Libraries > Configure
2. Manage > Libraries > Deny
3. Manage > Libraries > Down
4. Manage > Libraries > Inventory
5. Manage > Libraries > List
6. Manage > Libraries > Requests
7. Manage > Libraries > Reset
8. Manage > Libraries > Resubmit
9. Manage > Libraries > Up
附录 E. Main > Manage > Libraries > Advanced > ACS 命令
1. Manage > Libraries > Advanced > ACS > ACS_CSI_HOSTPORT
2. Manage > Libraries > Advanced > ACS > ACS_SEL_SOCKET
3. Manage > Libraries > Advanced > ACS > ACS_SSI_HOSTNAME
4. Manage > Libraries > Advanced > ACS > ACS_SSI_INET_PORT
5. Manage > Libraries > Advanced > ACS > ACS_SSI_SOCKET
6. Manage > Libraries > Advanced > ACS > ACS_TCP_RPCSERVICE
7. Manage > Libraries > Advanced > ACS > ACS_UDP_RPCSERVICE
8. Manage > Libraries > Advanced > ACS > API_BARCODE_RULES
9. Manage > Libraries > Advanced > ACS > TestACS
10. Manage > Libraries > Advanced > ACS > ViewVMconf
附录 F. Main > Manage > License 命令
1. Manage > License > Add
2. Manage > License > List
3. Manage > License > ListInfo
4. Manage > License > Remove
附录 G. Main > Manage > MountPoints 命令
1. Manage > MountPoints > List
2. Manage > MountPoints > Mount
3. Manage > MountPoints > Unmount
附录 H. Main > Manage > NetBackup CLI 命令
1. Manage > NetBackupCLI > Create
2. Manage > NetBackupCLI > Delete
3. Manage > NetBackupCLI > List
4. Manage > NetBackupCLI > PasswordExpiry
附录 I. Main > Manage > OpenStorage 命令
1. Manage > OpenStorage > Install
2. Manage > OpenStorage > List
3. Manage > OpenStorage > Readme
4. Manage > OpenStorage > Share
5. Manage > OpenStorage > Uninstall
附录 J. Main > Manage > Software 命令
1. Manage > Software > Cancel
2. Manage > Software > Delete
3. Manage > Software > Download
4. Manage > Software > DownloadProgress
5. Manage > Software > Firmware
6. Manage > Software > Install
7. Manage > Software > List
8. Manage > Software > Readme
9. Manage > Software > Rollback
10. Manage > Software > Share
11. Manage > Software > UpgradeStatus
12. Manage > Software > VxUpdate
附录 K. Main > Manage > Storage 命令
1. Manage > Storage > Add
2. Manage > Storage > Create
3. Manage > Storage > Delete
4. Manage > Storage > Edit
5. Manage > Storage > Monitor
6. Manage > Storage > Move
7. Manage > Storage > Remove
8. Manage > Storage > Resize
9. Manage > Storage > Scan
10. Manage > Storage > Show
11. Manage > Storage > Erase
附录 L. Main > Manage > Tapes 命令
1. Manage > Tapes > Cleaning
2. Manage > Tapes > Delete
3. Manage > Tapes > Eject
4. Manage > Tapes > Freeze
5. Manage > Tapes > Inventory
6. Manage > Tapes > List
7. Manage > Tapes > ListNetBackupMedia
8. Manage > Tapes > Suspend
9. Manage > Tapes > Unfreeze
10. Manage > Tapes > Unsuspend
附录 M. Main > Manage > Certificates 命令
1. Manage > Certificates > Generate
2. Manage > Certificates > Delete
附录 N. Main > Monitor 命令
1. Monitor > Beacon
2. Monitor > MemoryStatus
3. Monitor > NetBackup
4. Monitor > NetworkStatus
5. “监视”> SDCS
6. Monitor > Top
7. Monitor > Uptime
8. Monitor > Who
9. 监视 > 硬件
附录 O. Main > Network 命令
1. Network > Configure
2. Network > Date
3. Network > DNS
4. Network > Gateway
5. Network > Hostname
6. Network > Hosts
7. Network > IPv4
8. Network > IPv6
9. Network > LinkAggregation
10. Network > NetStat
11. Network > NTPServer
12. Network > Ping
13. Network > SetProperty
14. Network > Show
15. Network > TimeZone
16. Network > TraceRoute
17. Network > Unconfigure
18. Network > VLAN
19. Network > WANOptimization
附录 P. Main > Network > Security 命令 (IPsec)
1. Network > Security > Configure
2. Network > Security > Delete
3. Network > Security > Export
4. Network > Security > Import
5. Network > Security > Provision
6. Network > Security > Refresh
7. Network > Security > Show
8. Network > Security > Unconfigure
附录 Q. Main > Reports 命令
1. Reports > Deduplication
2. Reports > Process
附录 R. Main > Settings 命令
1. Settings > Cloud
2. Settings > Deduplication
3. Settings > FibreTransport
4. Settings > iSCSI > Initiator
5. Settings > iSCSI > Interface
6. Settings > iSCSI > Target
7. Settings > LogForwarding
8. Settings > LifeCycle
9. Settings > NetBackup
10. Settings > Password
11. Settings > Share
12. Settings > SNMP polling
13. Settings > Sysctl
14. Settings > SystemLocale
15. Settings > NetBackup DNAT
附录 S. Main > Settings > Alerts 命令
1. Settings > Alerts > CallHome
2. Settings > Alerts > Email
3. Settings > Alerts > Hardware
4. Settings > Alerts > SNMP
附录 T. Main > Settings > Notifications 视图命令
1. Settings > Notifications > LoginBanner
附录 U. Main > Settings > Security 命令
1. Settings > Security > Authorization
2. Settings > Security > Authentication > ActiveDirectory
3. Settings > Security > Authentication > Kerberos
4. Settings > Security > Authentication > LDAP
5. Settings > Security > Authentication > LocalUser
6. Main > Settings > Security > Certificate
7. Main > Settings > Security > FIPS
8. Main > Settings > Security > Ports
9. Main > Settings > Security > STIG
附录 V. Main > Support 命令
1. Support > Checkpoint
2. Support > Cleanup > RemoveShelfEntries
3. Support > Cleanup > ResetDIMMErrors
4. Support > Collect
5. Support > DataCollect
6. Support > Disk
7. Support > Errors
8. Support > FactoryReset
9. Support > FibreTransport
10. Support > InfraServices
11. Support > iostat
12. Support > IPMI
13. Support > KillRemoteCall
14. Support > Logs
15. Support > Maintenance
16. Support > Messages
17. Support > NBDNA
18. Support > nbperfchk
19. Support > NBSU
20. Support > Processes
21. Support > RAID
22. Support > Reboot
23. Support > RecoverStorage
24. Support > Service
25. Support > ServiceAllowed
26. Support > Show
27. Support > Shutdown
28. Support > Storage ClearReservations
29. Support > Storage Reset
30. Support > Storage SanityCheck
31. Support > Test

名称

Main > Monitor > Hardware — 查看各种硬件组件以及错误和运行状况。

大纲

Hardware ShowErrors

Hardware ShowComponents

Hardware ShowHealth Appliance [Item]

Hardware ShowHealth StorageShelf Item []

Hardware ShowHealth PrimaryShelf [Item]

Hardware ShowHealth ExpansionShelf [ExpansionShelfID][Item]

描述

使用此命令可执行以下操作：

显示硬件组件，如设备、计算节点或存储扩展架。此外还将显示与这些组件关联的项目。
查看与设备的硬件组件相关的错误。您可以使用此信息通知 Veritas 技术支持出现的错误。
查看设备和连接存储的各个硬件组件的性能和状态。

选项

Hardware ShowComponents: 显示设备的所有硬件组件和项目。

Hardware ShowErrors: 显示与硬件状态相关的所有错误。

Hardware ShowHealth Appliance [Item]

查看设备的各个硬件组件的性能和状态。[Item] 参数指定要查询其数据的硬件部件。

以下选项可用于 [Item] 参数。默认值为 ALL。

对于 52xx 设备：

(All/Fan/CPU/Disk/Fibrechannel/RAID/Power/Temperature/Product/ PCI/Network/Firmware/Adapter/Partition/MSDP/MSDPCloud/DIMM) [all]

对于 53xx 设备：

(All/Fan/CPU/Disk/Fibrechannel/RAID/Power/Temperature/Product/ PCI/Network/Firmware/Connection/StorageStatus/Partition/DIMM) [all]

例如，要查看设备的序列号，请运行以下命令：

Hardware ShowHealth Appliance Product

Hardware ShowHealth StorageShelf [Item]

查看连接到 52xx 设备的存储扩展架的各个硬件组件的性能和状态。[Item] 参数指定要查询其数据的硬件部件。

以下选项可用于 [Item] 参数。默认值为 ALL。

(All/Fan/Disk/Power/Temperature/Product) [all]

Hardware ShowHealth PrimaryShelf [Item]

查看 NetBackup 53xx Appliance 的主存储扩展架的性能和状态。

以下选项可用于 [Item] 参数。默认值为 ALL。

(All/Fan/Disk/RAID/Power/Temperature/Product/Firmware/BBU/ Controller/Volume/Connection) [all]

Hardware ShowHealth ExpansionShelf [ExpansionShelfID] [Item]

查看 NetBackup 53xx Appliance 的扩展存储扩展架的性能和状态。

其中 [ExpansionShelfID] 是特定扩展架的 ID。默认情况下会显示所有存储扩展架的数据。要检查扩展架 ID，请使用 Main > Monitor > Hardware ShowComponents 命令。

以下选项可用于 [Item] 参数。默认值为 ALL。

(All/Fan/Disk/Power/Temperature/Product) [all]

例如，要查看 ID 为 1 的扩展存储扩展架上的风扇状态，请运行以下命令：

Hardware ShowHealth ExpansionShelf 1 FAN

ShowHealth Appliance Partition ExportCSV: 导出设备上所有分区的状态。按照命令行操作界面上的说明来查找 CSV 文件以了解更多详细信息。

示例

以下是 Monitor > Hardware ShowHealth Appliance Product 命令的示例输出。

abc123.Monitor> Hardware ShowHealth Appliance Product Compute Node abc123.company.com Time Monitoring Ran: Tue Jul 19 2016 02:29:15 PDT +-----------------------------------------------------+ | Hardware monitor information | |+----------------+--------------+------------------+ | || Name | Manufacturer | Serial | | |+----------------+--------------+------------------+ | || NetBackup 5240 | Veritas | abc123serialno | | |+----------------+--------------+------------------+ | | | +-----------------------------------------------------+

以下是 Main > Monitor > Hardware ShowHealth ExpansionShelf 1 Fan 命令的示例输出：

Node abc122 Time Monitoring Ran: Thu Mar 27 2014 07:20:43 Compute node does not have any errors. +------------------------------------------------------------+ | Expansion Storage Shelf 1 Fan Information | |+----------------------------------------------------------+| ||ID| Location | Status | State | Acknowledge || ||--+------------+------------+---------+-------------------|| ||1 |Tray 1 Right|Optimal |OK |N/A || ||--+------------+------------+---------+-------------------|| ||2 |Tray 1 Left |Optimal |OK |N/A || ||--+------------+------------+---------+-------------------|| ||3 |Tray 1 Right|Optimal |OK |N/A || ||--+------------+------------+---------+-------------------|| ||4 |Tray 1 Left |Optimal |OK |N/A || |+----------------------------------------------------------+| +------------------------------------------------------------+