Veritas NetBackup™ Appliance 命令参考指南
- 概述
- 附录 A. Main > Appliance 命令
- 附录 B. Main > Manage > FibreChannel 命令
- 附录 C. Main > Manage > HighAvailability 命令
- 附录 D. Main > Manage > Libraries 命令
- 附录 E. Main > Manage > Libraries > Advanced > ACS 命令
- Manage > Libraries > Advanced > ACS > ACS_CSI_HOSTPORT
- Manage > Libraries > Advanced > ACS > ACS_SEL_SOCKET
- Manage > Libraries > Advanced > ACS > ACS_SSI_HOSTNAME
- Manage > Libraries > Advanced > ACS > ACS_SSI_INET_PORT
- Manage > Libraries > Advanced > ACS > ACS_SSI_SOCKET
- Manage > Libraries > Advanced > ACS > ACS_TCP_RPCSERVICE
- Manage > Libraries > Advanced > ACS > ACS_UDP_RPCSERVICE
- Manage > Libraries > Advanced > ACS > API_BARCODE_RULES
- Manage > Libraries > Advanced > ACS > TestACS
- Manage > Libraries > Advanced > ACS > ViewVMconf
- 附录 F. Main > Manage > License 命令
- 附录 G. Main > Manage > MountPoints 命令
- 附录 H. Main > Manage > NetBackup CLI 命令
- 附录 I. Main > Manage > OpenStorage 命令
- 附录 J. Main > Manage > Software 命令
- Manage > Software > Cancel
- Manage > Software > Delete
- Manage > Software > Download
- Manage > Software > DownloadProgress
- Manage > Software > Firmware
- Manage > Software > Install
- Manage > Software > List
- Manage > Software > Readme
- Manage > Software > Rollback
- Manage > Software > Share
- Manage > Software > UpgradeStatus
- Manage > Software > VxUpdate
- 附录 K. Main > Manage > Storage 命令
- 附录 L. Main > Manage > Tapes 命令
- 附录 M. Main > Manage > Certificates 命令
- 附录 N. Main > Monitor 命令
- 附录 O. Main > Network 命令
- Network > Configure
- Network > Date
- Network > DNS
- Network > Gateway
- Network > Hostname
- Network > Hosts
- Network > IPv4
- Network > IPv6
- Network > LinkAggregation
- Network > NetStat
- Network > NTPServer
- Network > Ping
- Network > SetProperty
- Network > Show
- Network > TimeZone
- Network > TraceRoute
- Network > Unconfigure
- Network > VLAN
- Network > WANOptimization
- 附录 P. Main > Network > Security 命令 (IPsec)
- 附录 Q. Main > Reports 命令
- 附录 R. Main > Settings 命令
- Settings > Cloud
- Settings > Deduplication
- Settings > FibreTransport
- Settings > iSCSI > Initiator
- Settings > iSCSI > Interface
- Settings > iSCSI > Target
- Settings > LogForwarding
- Settings > LifeCycle
- Settings > NetBackup
- Settings > Password
- Settings > Share
- Settings > SNMP polling
- Settings > Sysctl
- Settings > SystemLocale
- Settings > NetBackup DNAT
- 附录 S. Main > Settings > Alerts 命令
- 附录 T. Main > Settings > Notifications 视图命令
- 附录 U. Main > Settings > Security 命令
- Settings > Security > Authorization
- Settings > Security > Authentication > ActiveDirectory
- Settings > Security > Authentication > Kerberos
- Settings > Security > Authentication > LDAP
- Settings > Security > Authentication > LocalUser
- Main > Settings > Security > Certificate
- Main > Settings > Security > FIPS
- Main > Settings > Security > Ports
- Main > Settings > Security > STIG
- 附录 V. Main > Support 命令
- Support > Checkpoint
- Support > Cleanup > RemoveShelfEntries
- Support > Cleanup > ResetDIMMErrors
- Support > Collect
- Support > DataCollect
- Support > Disk
- Support > Errors
- Support > FactoryReset
- Support > FibreTransport
- Support > InfraServices
- Support > iostat
- Support > IPMI
- Support > KillRemoteCall
- Support > Logs
- Support > Maintenance
- Support > Messages
- Support > NBDNA
- Support > nbperfchk
- Support > NBSU
- Support > Processes
- Support > RAID
- Support > Reboot
- Support > RecoverStorage
- Support > Service
- Support > ServiceAllowed
- Support > Show
- Support > Shutdown
- Support > Storage ClearReservations
- Support > Storage Reset
- Support > Storage SanityCheck
- Support > Test
名称
Main > Support > ServiceAllowed — 使用 ServiceAllowed 命令将主存储扩展架或扩展存储扩展架的特定组件设置为“允许服务”模式，以便可以在这些单元上执行服务。
大纲
ServiceAllowed Set PrimaryShelf
ServiceAllowed Set ExpansionShelf
描述
通过 ServiceAllowed 命令选项，您可以将主存储扩展架或扩展存储扩展架的特定组件设置为“允许服务”模式，以便可以在这些单元上执行服务。
Veritas 要求您只能在 Veritas 技术支持的协助下执行此过程。 在尝试运行这些命令之前，请参考以下文档：
NetBackup Appliance 管理指南
NetBackup Appliance 故障排除指南
选项
以下命令选项适用于 ServiceAllowed Set PrimaryShelf 命令：
- ServiceAllowed Set PrimaryShelf Controller locationflag
使用此命令可为主扩展架控制器设置“允许服务”标志。
其中 location 为 A 或 B，flag 为 on 或 off。
- ServiceAllowed Set PrimaryShelf FanCanister locationflag
使用此命令可为主扩展架风扇模块设置“允许服务”标志。
其中 location 为 Left 或 Right，flag 为 on 或 off。
- ServiceAllowed Set PrimaryShelf HDD DrawerIDSlotNoFlag
使用此命令可为主扩展架硬盘驱动器设置“允许服务”标志。
其中 DrawerID 为 1-5，SlotNo 为 1-12，flag 为 on 或 off。
- ServiceAllowed Set PrimaryShelf PowerCanister locationflag
使用此命令可为主扩展架电源模块设置“允许服务”标志。
其中 location 为 Top 或 Bottom，flag 为 on 或 off。
以下命令选项适用于 ServiceAllowed Set ExpansionShelf 命令：
- ServiceAllowed Set ExpansionShelf ExpansionCanister locationflag
使用此命令可为扩展架模块设置“允许服务”标志。
其中 location 为 Top 或 Bottom，flag 为 on 或 off。
- ServiceAllowed Set ExpansionShelf FanCanister locationflag
使用此命令可为扩展架风扇模块设置“允许服务”标志。
其中 location 为 Left 或 Right，flag 为 on 或 off。
- ServiceAllowed Set ExpansionShelf HDD ExpansionShelfIDDrawerIDSlotNoFlag
使用此命令可为扩展架硬盘驱动器设置“允许服务”标志。
其中，ExpansionShelfID 为 0 - 98，DrawerID 为 1-5，SlotNo 为 1-12，flag 为打开或关闭。
- ServiceAllowed Set ExpansionShelf PowerCanister locationflag
使用此命令可为扩展架电源模块设置“允许服务”标志。
其中 location 为 Top 或 Bottom，flag 为 on 或 off。