Veritas NetBackup™ Appliance 命令参考指南
- 概述
- 附录 A. Main > Appliance 命令
- 附录 B. Main > Manage > FibreChannel 命令
- 附录 C. Main > Manage > HighAvailability 命令
- 附录 D. Main > Manage > Libraries 命令
- 附录 E. Main > Manage > Libraries > Advanced > ACS 命令
- Manage > Libraries > Advanced > ACS > ACS_CSI_HOSTPORT
- Manage > Libraries > Advanced > ACS > ACS_SEL_SOCKET
- Manage > Libraries > Advanced > ACS > ACS_SSI_HOSTNAME
- Manage > Libraries > Advanced > ACS > ACS_SSI_INET_PORT
- Manage > Libraries > Advanced > ACS > ACS_SSI_SOCKET
- Manage > Libraries > Advanced > ACS > ACS_TCP_RPCSERVICE
- Manage > Libraries > Advanced > ACS > ACS_UDP_RPCSERVICE
- Manage > Libraries > Advanced > ACS > API_BARCODE_RULES
- Manage > Libraries > Advanced > ACS > TestACS
- Manage > Libraries > Advanced > ACS > ViewVMconf
- 附录 F. Main > Manage > License 命令
- 附录 G. Main > Manage > MountPoints 命令
- 附录 H. Main > Manage > NetBackup CLI 命令
- 附录 I. Main > Manage > OpenStorage 命令
- 附录 J. Main > Manage > Software 命令
- Manage > Software > Cancel
- Manage > Software > Delete
- Manage > Software > Download
- Manage > Software > DownloadProgress
- Manage > Software > Firmware
- Manage > Software > Install
- Manage > Software > List
- Manage > Software > Readme
- Manage > Software > Rollback
- Manage > Software > Share
- Manage > Software > UpgradeStatus
- Manage > Software > VxUpdate
- 附录 K. Main > Manage > Storage 命令
- 附录 L. Main > Manage > Tapes 命令
- 附录 M. Main > Manage > Certificates 命令
- 附录 N. Main > Monitor 命令
- 附录 O. Main > Network 命令
- Network > Configure
- Network > Date
- Network > DNS
- Network > Gateway
- Network > Hostname
- Network > Hosts
- Network > IPv4
- Network > IPv6
- Network > LinkAggregation
- Network > NetStat
- Network > NTPServer
- Network > Ping
- Network > SetProperty
- Network > Show
- Network > TimeZone
- Network > TraceRoute
- Network > Unconfigure
- Network > VLAN
- Network > WANOptimization
- 附录 P. Main > Network > Security 命令 (IPsec)
- 附录 Q. Main > Reports 命令
- 附录 R. Main > Settings 命令
- Settings > Cloud
- Settings > Deduplication
- Settings > FibreTransport
- Settings > iSCSI > Initiator
- Settings > iSCSI > Interface
- Settings > iSCSI > Target
- Settings > LogForwarding
- Settings > LifeCycle
- Settings > NetBackup
- Settings > Password
- Settings > Share
- Settings > SNMP polling
- Settings > Sysctl
- Settings > SystemLocale
- Settings > NetBackup DNAT
- 附录 S. Main > Settings > Alerts 命令
- 附录 T. Main > Settings > Notifications 视图命令
- 附录 U. Main > Settings > Security 命令
- Settings > Security > Authorization
- Settings > Security > Authentication > ActiveDirectory
- Settings > Security > Authentication > Kerberos
- Settings > Security > Authentication > LDAP
- Settings > Security > Authentication > LocalUser
- Main > Settings > Security > Certificate
- Main > Settings > Security > FIPS
- Main > Settings > Security > Ports
- Main > Settings > Security > STIG
- 附录 V. Main > Support 命令
- Support > Checkpoint
- Support > Cleanup > RemoveShelfEntries
- Support > Cleanup > ResetDIMMErrors
- Support > Collect
- Support > DataCollect
- Support > Disk
- Support > Errors
- Support > FactoryReset
- Support > FibreTransport
- Support > InfraServices
- Support > iostat
- Support > IPMI
- Support > KillRemoteCall
- Support > Logs
- Support > Maintenance
- Support > Messages
- Support > NBDNA
- Support > nbperfchk
- Support > NBSU
- Support > Processes
- Support > RAID
- Support > Reboot
- Support > RecoverStorage
- Support > Service
- Support > ServiceAllowed
- Support > Show
- Support > Shutdown
- Support > Storage ClearReservations
- Support > Storage Reset
- Support > Storage SanityCheck
- Support > Test
名称
Main > Settings > Alerts > Email — 用于为设备配置电子邮件支持。
大纲
Email Hardware Add Addresses
Email Hardware Delete Addresses
Email NotificationInterval Time
Email SenderID Reset
Email SenderID Set Address
Email Show
Email Test
Email SMTP Add Server [Account] [Password]
Email SMTP Delete
Email Software Add Addresses
Email Software Delete Addresses
描述
使用此命令可添加、替换或显示设备所使用的电子邮件地址。可以使用此命令来定义一个或多个电子邮件。
选项
- Email Hardware Add Addresses
添加或附加硬件管理员的电子邮件帐户以供 NetBackup 使用。
其中 Addresses 是用户的电子邮件地址。要定义多个电子邮件，请用分号分隔这些电子邮件。
- Email Hardware Delete Addresses
删除供 NetBackup 使用的硬件管理员电子邮件帐户。
其中 Addresses 是用户的电子邮件地址。要定义多个电子邮件，请用分号分隔这些电子邮件。
- Email NotificationInterval time
定义相邻两次向管理员发送警报电子邮件之间的时间跨度。
其中 time 是发送到管理员的警报电子邮件之间的时间。此变量以分钟为单位进行定义。
- Email SenderID Reset
将当前电子邮件 ID 重置为用于从设备收到的电子邮件的默认电子邮件 ID。
- Email SenderID Set Address
设置用于从设备收到的电子邮件的发件人电子邮件 ID。其中 Address 是发件人的电子邮件地址。
- Email Show
查看电子邮件设置或 SMTP 设置
- Email SMTP Add Server [Account] [Password]
添加 NetBackup 可以使用的 SMTP 服务器。
Server 变量是用于发送电子邮件的目标 SMTP 服务器的主机名。Account 选项标识用于向 SMTP 服务器进行身份验证的帐户的名称。Password 选项是用于向 SMTP 服务器进行身份验证的密码。
- Email SMTP Delete
删除 NetBackup 所使用的 SMTP 服务器。
- Email SMTP Enable
启用 NetBackup 所使用的 SMTP 服务器。
- Email Software Add Addresses
添加或附加软件管理员的电子邮件帐户以供 NetBackup 使用。
其中 Addresses 是用户的电子邮件地址。要定义多个电子邮件，请用分号分隔这些电子邮件。
- Email Software Delete Addresses
删除供 NetBackup 使用的软件管理员电子邮件帐户。
其中 Addresses 是用户的电子邮件地址。要定义多个电子邮件，请用分号分隔这些电子邮件。
- Email Test
测试电子邮件将发送到上述配置的电子邮件地址。检查邮件收件箱中是否收到测试电子邮件。电子邮件传输由设备的网络连接、SMTP 设置和电子邮件地址设置决定。如果未收到测试电子邮件，请按照提示的错误消息进行故障排除。