Veritas NetBackup™ Flex Scale Administrator's Guide
- Product overview
- Viewing information about the NetBackup Flex Scale cluster environment
- NetBackup Flex Scale infrastructure management
- User management
- Considerations for managing NetBackup Flex Scale users
- Adding users
- Changing user password
- Removing users
- Considerations for configuring AD/LDAP
- Configuring AD server for Universal shares and Instant Access
- Configuring AD/LDAP servers for NetBackup services
- Configuring additional AD/LDAP servers for managing NetBackup services/Universal Shares/Instant Access
- Configuring AD/LDAP servers on clusters deployed with only media servers
- Directory services and certificate management
- Region settings management
- About NetBackup Flex Scale storage
- About Universal Shares
- Node and disk management
- License management
- User management
- NetBackup Flex Scale network management
- About network management
- Modifying DNS settings
- About bonding Ethernet interfaces
- Bonding operations
- Configuring NetBackup Flex Scale in a non-DNS environment
- Data network configurations
- NetBackup Flex Scale infrastructure monitoring
- Resiliency in NetBackup Flex Scale
- EMS server configuration
- Site-based disaster recovery in NetBackup Flex Scale
- About site-based disaster recovery in NetBackup Flex Scale
- Configuring disaster recovery using GUI
- Clearing the host cache
- Managing disaster recovery using GUI
- Performing disaster recovery using RESTful APIs
- Active-Active disaster recovery configuration
- NetBackup optimized duplication using Storage Lifecycle Policies
- NetBackup Flex Scale security
- Troubleshooting
- Services management
- Collecting logs for cluster nodes
- Checking and repairing storage
- Troubleshooting NetBackup Flex Scale issues
- If cluster configuration fails (for example because an IP address that was already in use is specified) and you try to reconfigure the cluster, the UI displays an error but the configuration process continues to run
- Validation error while adding VMware credentials to NetBackup
- NetBackup Web UI incorrectly displays some NetBackup Flex Scale processes as failed
- Unable to create BMR Shared Resource Tree (SRT) on NetBackup Flex Scale Appliance
- NetBackup configuration files are not persistent across operations that require restarting the system
- Appendix A. Configuring NetBackup optimized duplication
- Appendix B. Disaster recovery terminologies
- Appendix C. Configuring Auto Image Replication
Data network configurations
All the NetBackup operational data traffic, including communications with external hosts and services, is routed on this network. A data network is required to set up the cluster.
Note:
Ensure that the IP addresses and FQDN that you specify are added to the DNS server that you specify here and are resolvable on the network.
Note:
The fd00:200/120 network is reserved and used internally by NetBackup Flex Scale, and it should not be used anywhere.
You can configure a cluster without a DNS server.
See Configuring NetBackup Flex Scale in a non-DNS environment.
The following types of data network configurations can be done on NetBackup Flex Scale
Plain device (eth5)
VLAN on eth5
Bonded interfaces (bond0 using eth5 and eth7)
See Network configuration on bonded interfaces (bond0 on eth5 and eth7).
VLAN on bond (VLAN on bond0)
To list data networks
- Navigate to Settings > Network > Data Network.
Note:
If you have configured disaster recovery, See Support for multiple VLAN when disaster recovery is configured.