Veritas NetBackup™ Appliance Commands Reference Guide

Last Published:
Product(s): Appliances (3.1.2)
Platform: 5220,5230,5240,5330,5340
  1. Overview
    1.  
      About the NetBackup Appliance Shell Menu
    2. Logging on to the NetBackup Appliance Shell Menu
      1.  
        Command limitations on appliances that are not configured
    3.  
      Using the NetBackup Appliance Shell Menu
    4. About the NetBackup Appliance Shell Menu command views
      1.  
        About the commands under the Appliance view
      2.  
        About the commands under the Manage view
      3.  
        About the commands under the Monitor view
      4.  
        About the commands under the Network view
      5.  
        About the commands under the Reports view
      6.  
        About the commands under the Settings view
      7.  
        About the commands under the Support view
  2. Appendix A. Main > Appliance commands
    1.  
      Appliance > Master
    2.  
      Appliance > Media
    3.  
      Appliance > Management
    4.  
      Appliance > Remove
    5.  
      Appliance > ShowDedupPassword
    6.  
      Appliance > ShowIdentity
    7.  
      Appliance > Status
  3. Appendix B. Main > Manage > FibreChannel commands
    1.  
      Manage > FibreChannel > Clean
    2.  
      Manage > FibreChannel > Configure
    3.  
      Manage > FibreChannel > Reset
    4.  
      Manage > FibreChannel > Scan
    5.  
      Manage > FibreChannel > Show
    6.  
      Manage > FibreChannel > Statistics
  4. Appendix C. Main > Manage > HighAvailability commands
    1.  
      Manage > HighAvailability > AddNode
    2.  
      Manage > HighAvailability > GetAssetTag
    3.  
      Manage > HighAvailability > RemoveNode
    4.  
      Manage > HighAvailability > Setup
    5.  
      Manage > HighAvailability > Status
    6.  
      Manage > HighAvailability > Switchover
  5. Appendix D. Main > Manage > Libraries commands
    1.  
      Manage > Libraries > Configure
    2.  
      Manage > Libraries > Deny
    3.  
      Manage > Libraries > Down
    4.  
      Manage > Libraries > Inventory
    5.  
      Manage > Libraries > List
    6.  
      Manage > Libraries > Requests
    7.  
      Manage > Libraries > Reset
    8.  
      Manage > Libraries > Resubmit
    9.  
      Manage > Libraries > Up
  6. Appendix E. Main > Manage > Libraries > Advanced > ACS commands
    1.  
      Manage > Libraries > Advanced > ACS > ACS_CSI_HOSTPORT
    2.  
      Manage > Libraries > Advanced > ACS > ACS_SEL_SOCKET
    3.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_HOSTNAME
    4.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_INET_PORT
    5.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_SOCKET
    6.  
      Manage > Libraries > Advanced > ACS > ACS_TCP_RPCSERVICE
    7.  
      Manage > Libraries > Advanced > ACS > ACS_UDP_RPCSERVICE
    8.  
      Manage > Libraries > Advanced > ACS > API_BARCODE_RULES
    9.  
      Manage > Libraries > Advanced > ACS > TestACS
    10.  
      Manage > Libraries > Advanced > ACS > ViewVMconf
  7. Appendix F. Main > Manage > License commands
    1.  
      Manage > License > Add
    2.  
      Manage > License > List
    3.  
      Manage > License > ListInfo
    4.  
      Manage > License > Remove
  8. Appendix G. Main > Manage > MountPoints commands
    1.  
      Manage > MountPoints > List
    2.  
      Manage > MountPoints > Mount
    3.  
      Manage > MountPoints > Unmount
  9. Appendix H. Main > Manage > NetBackup CLI commands
    1.  
      Manage > NetBackupCLI > Create
    2.  
      Manage > NetBackupCLI > Delete
    3.  
      Manage > NetBackupCLI > List
    4.  
      Manage > NetBackupCLI > PasswordExpiry
  10. Appendix I. Main > Manage > OpenStorage commands
    1.  
      Manage > OpenStorage > Install
    2.  
      Manage > OpenStorage > List
    3.  
      Manage > OpenStorage > Readme
    4.  
      Manage > OpenStorage > Share
    5.  
      Manage > OpenStorage > Uninstall
  11. Appendix J. Main > Manage > Software commands
    1.  
      Manage > Software > Cancel
    2.  
      Manage > Software > Delete
    3.  
      Manage > Software > Download
    4.  
      Manage > Software > DownloadProgress
    5.  
      Manage > Software > Firmware
    6.  
      Manage > Software > Install
    7.  
      Manage > Software > List
    8.  
      Manage > Software > LiveUpdateClients
    9.  
      Manage > Software > Readme
    10.  
      Manage > Software > Rollback
    11.  
      Manage > Software > Share
    12.  
      Manage > Software > UpgradeStatus
  12. Appendix K. Main > Manage > Storage commands
    1.  
      Manage > Storage > Add
    2.  
      Manage > Storage > Create
    3.  
      Manage > Storage > Delete
    4.  
      Manage > Storage > Edit
    5.  
      Manage > Storage > Monitor
    6.  
      Manage > Storage > Move
    7.  
      Manage > Storage > Remove
    8.  
      Manage > Storage > Resize
    9.  
      Manage > Storage > Scan
    10.  
      Manage > Storage > Show
    11.  
      Manage > Storage > Erase
  13. Appendix L. Main > Manage > Tapes commands
    1.  
      Manage > Tapes > Cleaning
    2.  
      Manage > Tapes > Delete
    3.  
      Manage > Tapes > Eject
    4.  
      Manage > Tapes > Freeze
    5.  
      Manage > Tapes > Inventory
    6.  
      Manage > Tapes > List
    7.  
      Manage > Tapes > ListNetBackupMedia
    8.  
      Manage > Tapes > Suspend
    9.  
      Manage > Tapes > Unfreeze
    10.  
      Manage > Tapes > Unsuspend
  14. Appendix M. Main > Manage > Certificates commands
    1.  
      Manage > Certificates > Generate
    2.  
      Manage > Certificates > Delete
  15. Appendix N. Main > Monitor commands
    1.  
      Monitor > Beacon
    2.  
      Monitor > MemoryStatus
    3.  
      Monitor > NetBackup
    4.  
      Monitor > NetworkStatus
    5.  
      Monitor > SDCS
    6.  
      Monitor > Top
    7.  
      Monitor > Uptime
    8.  
      Monitor > Who
    9.  
      Monitor > Hardware
  16. Appendix O. Main > Network commands
    1.  
      Network > Configure
    2.  
      Network > Date
    3.  
      Network > DNS
    4.  
      Network > Gateway
    5.  
      Network > Hostname
    6.  
      Network > Hosts
    7.  
      Network > IPv4
    8.  
      Network > IPv6
    9.  
      Network > LinkAggregation
    10.  
      Network > NetStat
    11.  
      Network > NTPServer
    12.  
      Network > Ping
    13.  
      Network > SetProperty
    14.  
      Network > Show
    15.  
      Network > TimeZone
    16.  
      Network > TraceRoute
    17.  
      Network > Unconfigure
    18.  
      Network > VLAN
    19.  
      Network > WANOptimization
  17. Appendix P. Main > Network > Security (IPsec) commands
    1.  
      Network > IPsec > Configure
    2.  
      Network > IPsec > Delete
    3.  
      Network > IPsec > Export
    4.  
      Network > IPsec > Import
    5.  
      Network > IPsec > Provision
    6.  
      Network > IPsec > Refresh
    7.  
      Network > IPsec > Show
    8.  
      Network > IPsec > Unconfigure
  18. Appendix Q. Main > Reports commands
    1.  
      Reports > Deduplication
    2.  
      Reports > Process
  19. Appendix R. Main > Settings commands
    1.  
      Settings > Cloud
    2.  
      Settings > Deduplication
    3.  
      Settings > FibreTransport
    4.  
      Settings > iSCSI > Initiator
    5.  
      Settings > iSCSI > Interface
    6.  
      Settings > iSCSI > Target
    7.  
      Settings > LogForwarding
    8.  
      Settings > LifeCycle
    9.  
      Settings > LiveUpdateServer
    10.  
      Settings > NetBackup
    11.  
      Settings > Password
    12.  
      Settings > Share
    13.  
      Settings > SNMP polling
    14.  
      Settings > Sysctl
    15.  
      Settings > SystemLocale
  20. Appendix S. Main > Settings > Alerts commands
    1.  
      Settings > Alerts > CallHome
    2.  
      Settings > Alerts > Email
    3.  
      Settings > Alerts > Hardware
    4.  
      Settings > Alerts > SNMP
  21. Appendix T. Main > Settings > Notifications view commands
    1.  
      Settings > Notifications > LoginBanner
  22. Appendix U. Main > Settings > Security commands
    1.  
      Settings > Security > Authorization
    2.  
      Settings > Security > Authentication > ActiveDirectory
    3.  
      Settings > Security > Authentication > Kerberos
    4.  
      Settings > Security > Authentication > LDAP
    5.  
      Settings > Security > Authentication > LocalUser
    6.  
      Main > Settings > Security > Ports
    7.  
      Main > Settings > Security > STIG
    8.  
      Main > Settings > Security > FIPS
  23. Appendix V. Main > Support commands
    1.  
      Support > Checkpoint
    2.  
      Support > Cleanup > RemoveShelfEntries
    3.  
      Support > Cleanup > ResetDIMMErrors
    4.  
      Support > Collect
    5.  
      Support > DataCollect
    6.  
      Support > Disk
    7.  
      Support > Errors
    8.  
      Support > FactoryReset
    9.  
      Support > FibreTransport
    10.  
      Support > InfraServices
    11.  
      Support > iostat
    12.  
      Support > IPMI
    13.  
      Support > KillRemoteCall
    14.  
      Support > Logs
    15.  
      Support > Maintenance
    16.  
      Support > Messages
    17.  
      Support > NBDNA
    18.  
      Support > nbperfchk
    19.  
      Support > NBSU
    20.  
      Support > Processes
    21.  
      Support > RAID
    22.  
      Support > Reboot
    23.  
      Support > RecoverStorage
    24.  
      Support > Service
    25.  
      Support > ServiceAllowed
    26.  
      Support > Show
    27.  
      Support > Shutdown
    28.  
      Support > Storage ClearReservations
    29.  
      Support > Storage Reset
    30.  
      Support > Storage SanityCheck
    31.  
      Support > Test

Name

Main > Monitor > Hardware — View the various hardware components, view the errors and the health status.

SYNOPSIS

Hardware ShowErrors

Hardware ShowComponents

Hardware ShowHealth Appliance [Item]

Hardware ShowHealth StorageShelf [Item]

Hardware ShowHealth PrimaryShelf [Item]

Hardware ShowHealth ExpansionShelf [ExpansionShelfID] [Item]

DESCRIPTION

Use this command to do the following:

  • Display the hardware components such as the appliance or the compute node, or the storage shelves. The items that are associated with these components also display.

  • View the errors that are related to the hardware components of an appliance. You can use this information to notify Veritas Technical Support of the errors.

  • View the performance and status of various hardware components of the appliance and the attached storage.

OPTIONS

Hardware ShowComponents

Display all the hardware components and items of an appliance.

Hardware ShowErrors

Display all the errors that are related to hardware status.

Hardware ShowHealth Appliance [Item]

View the performance and status of various hardware components of the appliance. The [Item] parameter specifies the hardware part for which the data is queried.

The following options are available for the [Item] parameter. The default value is ALL.

For a 52xx appliance:

(All/Fan/CPU/Disk/Fibrechannel/RAID/Power/Temperature/Product/
PCI/Network/Firmware/Adapter/Partition/MSDP/MSDPCloud/DIMM) [all]

For a 53xx appliance:

(All/Fan/CPU/Disk/Fibrechannel/RAID/Power/Temperature/Product/
PCI/Network/Firmware/Connection/StorageStatus/Partition/DIMM) [all]

For example, to view the serial number of the appliance, run the following command:

Hardware ShowHealth Appliance Product

Hardware ShowHealth StorageShelf [Item]

View the performance and status of various hardware components of the storage shelf that is attached to a 52xx appliance. The [Item] parameter specifies the hardware part for which the data is queried.

The following options are available for the [Item] parameter. The default value is ALL.

(All/Fan/Disk/Power/Temperature/Product) [all]
Hardware ShowHealth PrimaryShelf [Item]

View the performance and status of the primary storage shelf of the NetBackup 53xx Appliance.

The following options are available for the [Item] parameter. The default value is ALL.

(All/Fan/Disk/RAID/Power/Temperature/Product/Firmware/BBU/
Controller/Volume/Connection) [all]
Hardware ShowHealth ExpansionShelf [ExpansionShelfID] [Item]

View the performance and status of the expansion storage shelf(shelves) of the NetBackup 53xx Appliance.

Where [ExpansionShelfID] is the ID of a specific expansion shelf. By default, the data is displayed for all the storage shelves. To check the expansion shelf IDs, use the Main > Monitor > Hardware ShowComponents command.

The following options are available for the [Item] parameter. The default value is ALL.

(All/Fan/Disk/Power/Temperature/Product) [all]

For example, to view the status of fan on the expansion storage shelf with an ID of 1, run the following command:

Hardware ShowHealth ExpansionShelf 1 FAN

ShowHealth Appliance Partition ExportCSV

Export the status of all the partitions on an appliance. Follow the instructions on the shell menu to find the CSV file for more details.

EXAMPLES

The following is an example output of the Monitor > Hardware ShowHealth Appliance Product command.

abc123.Monitor> Hardware ShowHealth Appliance Product
Compute Node abc123.company.com

Time Monitoring Ran: Tue Jul 19 2016 02:29:15 PDT 

+-----------------------------------------------------+
|            Hardware monitor information             |
|+----------------+--------------+------------------+ |
|| Name           | Manufacturer | Serial           | |
|+----------------+--------------+------------------+ |
|| NetBackup 5240 | Veritas      | abc123serialno | |
|+----------------+--------------+------------------+ |
|                                                     |
+-----------------------------------------------------+

The following is an example output of the Main > Monitor > Hardware ShowHealth ExpansionShelf 1 Fan command:

Node abc122

Time Monitoring Ran: Thu Mar 27 2014 07:20:43

Compute node does not have any errors.

+------------------------------------------------------------+
|        Expansion Storage Shelf 1 Fan Information           |
|+----------------------------------------------------------+|
||ID|  Location  |   Status   |  State  |    Acknowledge    ||
||--+------------+------------+---------+-------------------||
||1 |Tray 1 Right|Optimal     |OK       |N/A                ||
||--+------------+------------+---------+-------------------||
||2 |Tray 1 Left |Optimal     |OK       |N/A                ||
||--+------------+------------+---------+-------------------||
||3 |Tray 1 Right|Optimal     |OK       |N/A                ||
||--+------------+------------+---------+-------------------||
||4 |Tray 1 Left |Optimal     |OK       |N/A                ||
|+----------------------------------------------------------+|
+------------------------------------------------------------+