Veritas NetBackup™ Administrator's Guide, Volume II
- NetBackup licensing models and the nbdeployutil utility
- Creating and viewing the licensing report
- Reviewing a capacity licensing report
- Reconciling the capacity licensing report results
- Reviewing a traditional licensing report
- Additional configuration
- About dynamic host name and IP addressing
- About busy file processing on UNIX clients
- About the Shared Storage Option
- About configuring the Shared Storage Option in NetBackup
- Viewing SSO summary reports
- About the vm.conf configuration file
- Holds Management
- Menu user interfaces on UNIX
- About the tpconfig device configuration utility
- About the NetBackup Disk Configuration Utility
- Reference topics
- Host name rules
- About reading backup images with nbtar or tar32.exe
- Factors that affect backup time
- NetBackup notify scripts
- Media and device management best practices
- About TapeAlert
- About tape drive cleaning
- How NetBackup reserves drives
- About SCSI persistent reserve
- About the SPC-2 SCSI reserve process
- About checking for data loss
- About checking for tape and driver configuration errors
- How NetBackup selects media
- About selecting media in robots
- About selecting media in standalone drives
- About Tape I/O commands on UNIX
NetBackup runs the shared_drive_notify.cmd script (on Windows) and the shared_drive_notify script (on UNIX) when a shared drive is reserved or released.
The name of the current scan host.
The operation, which is one of the following:
Specifies that the host on which the script is executed needs SCSI access to the drive until it's released.
Informational only. Specifies that the host that reserved the drive needs SCSI access.
Specifies that only the scan host needs SCSI access to the drive.
Specifies that the host that executes the script has become the scan host. A host should not become a scan host while the drive is RESERVED.
The scan host may change between a RESERVED operation and a RELEASED operation.
The scripts are located in the following directories:
On Windows: Install_path\Volmgr\bin\shared_drive_notify.cmd
On UNIX: /usr/openv/volmgr/bin/shared_drive_notify
The script must be executable by the root user.
The script exits with status 0 upon successful completion.