Veritas Access Appliance 8.3 Upgrade Guide

Last Published:
Product(s): Appliances (8.3)
Platform: Veritas 3340,Veritas 3350,Veritas 3360
  1. Introduction
    1.  
      About the Access Appliance upgrade
    2.  
      About the supported software versions
    3.  
      Supported upgrade paths
    4.  
      Supported upgrade paths if continuous replication is configured
    5. About the preupgrade check
      1.  
        Error messages displayed during the preupgrade check
  2. Upgrading Access Appliance
    1.  
      Access Appliance upgrade overview
    2. Downloading the appliance software updates
      1. Downloading the software update using the UI
        1.  
          Downloading a software update from the Veritas Support website
      2. Downloading software updates using the Access Appliance shell menu
        1.  
          Downloading software updates directly to an Access Appliance node
        2.  
          Downloading software updates to an Access Appliance node using a client share
        3. Downloading software updates to an Access Appliance node using SCP
          1.  
            Installing OpenSSH
    3. Performing an upgrade pre-check
      1.  
        Running an upgrade pre-check using the UI
      2.  
        Running a pre-check from the appliance shell menu
    4. Completing pre-upgrade tasks
      1.  
        Performing manual preupgrade tasks
      2.  
        Performing preupgrade tasks when replication is configured
      3.  
        Considerations for Veritas Data Deduplication server if it is configured without WORM storage
    5. Performing an upgrade
      1.  
        Upgrading Access Appliance using the UI
      2.  
        Performing an upgrade from the appliance shell menu
    6. Completing post-upgrade tasks
      1.  
        Renewing internal certificate
      2.  
        Downloading and installing the required EEBs
      3.  
        Reconfiguring non-WORM Veritas Data Deduplication server
      4.  
        Increasing the Veritas Data Deduplication storage to 2.4 PiB
  3. Installing EEBs using the UI
    1.  
      About Access Appliance EEBs
    2.  
      Downloading EEBs
    3.  
      Installing EEBs
    4.  
      Rolling back EEBs
    5.  
      Removing EEBs

Removing EEBs

When you remove an EEB, the EEB RPM file is deleted from the inst/patch/appliance/available location. If you remove an EEB that is installed on the node, only the RPM file is deleted from the inst/patch/appliance/available directory and you can still view the installed EEB on the EEBs tab with an Installed status shown in the UI. If you remove an installed EEB and then roll it back, the RPM file is deleted and the EEB is rolled back and no longer displayed in the UI. To install the EEB again, you need to first upload the EEB and then install it.

To remove an EEB:

  1. Sign in to the Access Appliance UI using the following URL:

    https://console-ip:14161

    where console-ip is the management console IP address where the web interface is hosted.

  2. In the left navigation pane click Settings > Software management > EEBs.
  3. Select the EEB that you want to delete and click Remove.

    A notification is displayed on top of the page. To monitor the progress, click View details.