Please enter search query.
Search <book_title>...
Veritas Flex Appliance Getting Started and Administration Guide
Last Published:
2023-10-25
Product(s):
Appliances (3.3, 3.2, 3.1, 3.0)
Platform: Flex Appliance OS
- Product overview
- Release notes
- Getting started
- Managing network settings
- Managing users
- Managing Flex Appliance Console users and tenants
- Using Flex Appliance
- Managing the repository
- Managing application instances from Flex Appliance
- Upgrading application instances
- About Flex Appliance updates
- Appliance security
- Monitoring the appliance
- Configuring alerts
- Viewing the hardware status
- Reconfiguring the appliance
- Troubleshooting guidelines
Viewing the devices that are connected to the Fibre Channel ports
You can view all the devices that are connected to the appliance Fibre Channel ports from the Fibre Channel interfaces page. You can also use this page to scan for new devices or clean stale device information from the system.
Use the following procedure to view the devices that are connected to a particular port.
To view the devices that are connected to a Fibre Channel port
- On the Flex Appliance Console, click the Fibre Channel interfaces icon in the left-side navigation bar to access the Fibre Channel interfaces page.
- Click on the port that you want to view the information for.
- Under the Devices heading, click Show.
The appliance scans for devices when it starts up. If you connect or remove devices while the appliance is running, use the following procedure to rescan for newly connected devices or clean the removed devices from the system.
Note:
You cannot rescan the ports that are assigned to instances as targets for SAN client.
To rescan or clean Fibre Channel ports
- On the Flex Appliance Console, click the Fibre Channel interfaces icon in the left-side navigation bar to access the Fibre Channel interfaces page.
- Select the check box next to the port or ports that you want to rescan or clean.
- Click Rescan or Clean.