Important Update: Cohesity Products Documentation
All Cohesity product documentation are now managed via the Cohesity Docs Portal: https://docs.cohesity.com/HomePage/Content/home.htm. Some documentation available here may not reflect the latest information or may no longer be accessible.
Veritas NetBackup™ 5230 Appliance and Storage Shelf Product Description
- Product overview
- About the appliance
- About storage capacity
- About best practices for rack installation
- About the appliance rear panel
- About the mainboard RAID controller
- About the external RAID controller
- About the NetBackup 5230 rear panel configurations
- About the FC HBA port configurations
- About the 2-port 8 Gb FC HBA
- About the dual-port 10 Gb Ethernet card
- About the Veritas 3U16 24TB Storage Shelf / Veritas 3U16 36TB Storage Shelf
- Appliance and storage shelf connections
- NetBackup 5230 documentation
- Cables
- Technical specifications, standards, and compliance information
- Appendix A. About the optional Veritas 2U12 49TB Storage Shelf
About the FC HBA port configurations
The NetBackup 5230 appliance add-in cards are available in five configurations. Several configurations include one FC HBA card for VMware, Optimized Deduplication over FC, or tape library connectivity.
Configurations D and E support FTMS. In these configurations Port 1 on each FC HBA card (1) in slots 5 and 6 are configured in Target mode by default when SAN Client Fibre Transport is enabled. Port 2 in slots 5 and 6 and all of the other FC ports are configured in Initiator mode.
All configurations support the appliance to work as a replication target for Optimized Duplication and Auto Image Replication. For more information about available HBA cards for target port use, refer to the NetBackup Appliance Fibre Channel Guide.
