Important Update: Cohesity Products Documentation
All Cohesity product documentation are now managed via the Cohesity Docs Portal: https://docs.cohesity.com/HomePage/Content/home.htm. Some documentation available here may not reflect the latest information or may no longer be accessible.
Veritas NetBackup™ 5230 Appliance and Storage Shelf Product Description
- Product overview
- About the appliance
- About storage capacity
- About best practices for rack installation
- About the appliance rear panel
- About the mainboard RAID controller
- About the external RAID controller
- About the NetBackup 5230 rear panel configurations
- About the FC HBA port configurations
- About the 2-port 8 Gb FC HBA
- About the dual-port 10 Gb Ethernet card
- About the Veritas 3U16 24TB Storage Shelf / Veritas 3U16 36TB Storage Shelf
- Appliance and storage shelf connections
- NetBackup 5230 documentation
- Cables
- Technical specifications, standards, and compliance information
- Appendix A. About the optional Veritas 2U12 49TB Storage Shelf
I/O module SAS Activity LED location and conditions
This section discusses the location of the SAS Activity LEDs on the I/O module and the SAS Activity LED conditions.
Table: I/O module SAS Activity LED conditions
Condition | Activity LED (green) | Fault LED (amber) |
|---|---|---|
No Cable Present | Off | Off |
Cable Present All links up, no activity. | On | Off |
Cable Present All links up. | Flash with aggregate port activity | Off |
Critical Fault Any fault which causes operation of the cable to cease or fail to start. For example, an OVERCURRENT trip. | Off | On |
Non-Critical Fault Any fault which does not cause the connection to cease operation. For example, not all links established; OVERTEMPERATURE condition detected. | Flash with aggregate port activity | Flashing - One second on; one second off |