Veritas NetBackup™ Appliance Fibre Channel Guide

Last Published:
Product(s): Appliances (3.3.0.1, 3.2)
Platform: NetBackup Appliance OS
  1. About NetBackup Fibre Transport and SAN Client
    1.  
      About NetBackup Fibre Transport
    2. About NetBackup SAN Client and Fibre Transport
      1.  
        About the SAN Client license key
  2. About optimized duplication and Auto Image Replication over FC
    1.  
      About Fibre Transport for optimized duplication and Auto Image Replication between appliances
  3. About backup to tape support
    1.  
      About backup to tape support for NetBackup appliances
  4. VMware support
    1. About NetBackup appliance as a VMware backup host
      1.  
        NetBackup appliance as backup host: component overview
      2.  
        Notes on NetBackup appliance as a VMware backup host
    2.  
      About appliance dynamic multi-pathing for VMware backups with SAN transport
  5. Supported Fibre Channel features on NetBackup appliances
    1.  
      About supported Fibre Channel features on NetBackup appliances
    2.  
      Fibre Channel feature support for appliance HBA configurations
    3.  
      Supported data transfer methods for NetBackup appliances
    4.  
      About Fibre Transport paths for NetBackup appliances
  6. NetBackup Appliance rear panel configurations
    1.  
      About the NetBackup 5230 rear panel configurations
    2.  
      NetBackup 5240 Appliance I/O configuration options
    3.  
      NetBackup 5240 Appliance total I/O on-board and PCIe ports
    4.  
      NetBackup 5250 Appliance rear panel I/O configuration options
    5.  
      NetBackup 5330 Appliance compute node PCIe slot I/O configuration options
    6.  
      Available NetBackup 5340 Appliance PCIe-based I/O configurations
    7.  
      Available NetBackup 5350 Appliance PCIe-based I/O configurations
  7. About the HBA port mode configuration
    1.  
      Supported Fibre Channel port configurations for the NetBackup 5230 appliances
    2.  
      Supported Fibre Channel port configuration for the NetBackup 5240 appliances
    3.  
      Supported Fibre Channel configurations for the NetBackup 5250 appliance
    4.  
      Supported Fibre Channel port configurations for the NetBackup 53xx appliances
    5.  
      About the factory default port mode configuration
    6.  
      Default port mode configuration for FTMS, optimized duplication, and Auto Image Replication
  8. Zoning the FC SAN
    1.  
      How to determine appliance HBA WWPNs
    2.  
      About zoning the SAN for NetBackup appliances
    3.  
      About HBA link status on the NetBackup Appliance Shell Menu
  9. About the Fibre Transport page on the NetBackup Appliance Web Console
    1. Settings > Network > Fibre Transport
      1.  
        About the HBA port mode configuration table
  10. Configuring Fibre Transport on the appliance
    1.  
      About Fibre Transport media server verification
    2.  
      Guidelines for changing NetBackup appliance FT target ports to receive data streams from multiple SAN Client FC initiator ports
    3. How to configure Fibre Transport for optimized duplication and Auto Image Replication over FC
      1. Configuring Fibre Transport to other NetBackup appliances
        1.  
          About the Fibre Transport chunk size
      2.  
        How to configure two NetBackup 52xx or 53xx appliances in different domains for MSDP replication
  11.  
    Index

NetBackup 5330 Appliance compute node PCIe slot I/O configuration options

The rear panel of the NetBackup 5330 Appliance compute node contains six PCIe slots that are numbered 1 to 6. Slots 1, 2, and 3 are located in PCIe Riser Assembly 2. Slots 4, 5, and 6 are located in PCIe Riser Assembly 1.

All PCIe slots are populated with an 8 Gb Fibre Channel (FC) host bus adapter (HBA) card or a 10 Gb Ethernet network interface card (NIC). Slots 1 and 4 are reserved exclusively for attachment to the Primary Storage Shelf.

For complete information about FC HBA card usage, see the NetBackup Appliance Fibre Channel Guide.

Table: Available PCIe slot I/O configuration options for the NetBackup 5330 Appliance compute node describes the default PCIe slot I/O configuration options for the NetBackup 5330 Appliance.

Note:

A NetBackup appliance high availability (HA) configuration must use two identical appliances with regard to model number and hardware configuration.

For example, use two model 5330 appliances with configuration D. You cannot use one model 5330 appliance with configuration D and one model 5340 appliance with configuration D.

This requirement applies to all of the I/O configurations for each model.

Table: Available PCIe slot I/O configuration options for the NetBackup 5330 Appliance compute node

I/O configuration option

Slot 1

Slot 2

Slot 3

Slot 4

Slot 5

Slot 6

A

Primary Storage Shelf

10GbE NIC

10GbE NIC

Primary Storage Shelf

10GbE NIC

10GbE NIC

B

Primary Storage Shelf

10GbE NIC

10GbE NIC

Primary Storage Shelf

10GbE NIC

8Gb FC HBA

C

Primary Storage Shelf

10GbE NIC

10GbE NIC

Primary Storage Shelf

8Gb FC HBA

8Gb FC HBA

D

Primary Storage Shelf

8Gb FC HBA

10GbE NIC

Primary Storage Shelf

8Gb FC HBA

8Gb FC HBA

E

Primary Storage Shelf

8Gb FC HBA

8Gb FC HBA

Primary Storage Shelf

8Gb FC HBA

8Gb FC HBA