Veritas™ System Recovery 18 Service Pack 2 User's Guide

To define a virtual conversion job

1. On the Tasks menu, click Run or Manage Virtual Conversions.
2. On the toolbar, click Define New.
3. Select the virtual disk type (and version, if applicable) that you want to create, and then click Next.

   VMware Virtual Disk (.vmdk)	Converts the recovery points to a .vmdk format. This format only supports Workstation version 8.
   VMware ESXi Server	Converts the recovery points to a VMware ESXi Server. Note: Veritas System Recovery 16.0.2 no longer supports physical to virtual conversion for ESXi on a 32-bit operating system.
   Microsoft Virtual Disk	Converts the recovery points to a .vhd or .vhdx format. The .vhd format is supported for all versions before Windows 8 and the .vhdx format is supported for Windows 8 and above. Note: The Microsoft Virtual Disk type supports .vhd and .vhdx conversions. The .vhd conversion is available for all operating systems. The .vhdx conversion is only available for Windows 8/2012 R2 and above. If the sector size is 4K, the virtual disk can only be converted to a .vhdx format.

4. In the Source panel, select the recovery points you want to convert, and then click Next.

   Note:

   If you have specified a password while defining a backup job, the Enter Password dialog box is displayed. Enter the password that you specified when you created the backup job and click OK.

   Perform conversion using latest recovery points for this computer	Converts the most recent recovery points that exist in the recovery point storage location on your computer. The list of drives, source files (.v2i and .iv2i files), and dates comes from the most current system index file (.sv2i).
   Perform conversion using recovery points for another computer	Converts the recovery points that exist on another computer.
   Browse to and select the .sv2i file for the desired system	Specifies a path to a system index file (.sv2i) that resides elsewhere, such as a network location. If you selected a system index file that is stored on a network, you are prompted for your network credentials. See Rules for network credentials.
   Browse	Lets you browse to a path that contains a system index file. For example, you can browse to an external (USB) drive, a network location, or to removable media to select a system index file.
   Drives	Lets you select the drives with the recovery points that you want to convert based on the selected system index file.
   Sector Size	Displays the sector size as 4K or 512.

5. In the Virtual Disks Destination panel, set the options you want based on the virtual disk format and version (if applicable) that you selected earlier. Then click Next.

   Note:

   Veritas recommends that you select a secure remote network location as the virtual conversion over a network is unencrypted. If the virtual disk files and images are stored on a local computer, select a protected folder. Only privileged users or an administrator should have the rights to access the folder. The recommendation also applies to a one-time virtual conversion of a recovery point to a virtual disk.

   Virtual Disks Destination options for converting to VMware virtual disk or Microsoft virtual disk

   Folder for virtual disks	Lets you type the path to the folder where you want to place the virtual disk files. Note: When you select a path to place the virtual disk files, the Sector Size of the source and the destination must be the same.
   Browse	Lets you browse to locate the folder in which you want to place the virtual disk files.
   User name	Lets you type the user name if you specified a virtual disk folder location on a network See Rules for network credentials.
   Password	Specifies the password to a network path.
   Create one virtual disk per volume	Creates one virtual disk file per volume. If you do not select this option, each drive is matched to its respective hard drive letter assignment during the conversion. Therefore, it results in multiple drives within one virtual disk file. Note: This option is not available if the volumes are on separate disks.
   Rename	Lets you edit the file name of the resulting virtual disk file.

   Virtual Disks Destination options for converting to VMware ESXi Server

   ESXi server name or IP address	Lets you type the name of the server or the server's IP address.
   User name	Lets you type a valid administrator user name that has sufficient rights to an ESXi server.
   Password	Lets you type a valid password to the ESXi server.
   Destination for the virtual disks	Lets you type the path to the folder where you want to place the virtual disk files.
   Browse	Lets you browse to a destination location for the virtual disks.
   Rename	Lets you edit the name of the resulting virtual disk file.
   Next	Specifies the additional options for VMware ESXi Server virtual disks.
   Temporary location for conversion	Lets you type the name of the server or the server's IP address that you can use as a temporary location for files.
   Temporary Location Credentials	Lets you type a valid administrator user name and password that has sufficient rights.

6. In the General Options panel set the conversion options you want, and then click Next.

   Conversion job name

   Lets you type a name for the virtual conversion job or you can leave the default name.

   Split virtual disk into 2 GB (.vmdk) files

   Lets you split the virtual disk into multiple 2 GB .vmdk files. For example, use this option if your virtual disk is stored on a FAT32 drive. Or, any file system that does not support files larger than 2 GB. Or, if you want to copy the virtual disk files to a DVD but the size is larger than the DVD allows. Note: This option is specific to VMware; it is not available if you selected Microsoft Virtual Disk as the conversion format.

7. In the Conversion Time panel, set the conversion job schedule that you want, and then click Next.

   Conversion Time options for a Weekly schedule

   Automatically convert latest recovery points - Weekly	Converts the latest recovery points to virtual disks using a weekly schedule.
   Default	Uses the default conversion schedule.
   Start time	Lets you select the time you want the conversion to start.
   Days	Lets you select the day of the week that you want the conversion to take place.
   Run more than once per day	Converts the recovery points multiple times throughout a day.
   Time between conversions	Lets you select the amount of time to elapse before the next conversion.
   Number of times	Specifies the number of times that you want the conversion to occur, beginning from the selected start time.
   Details	Displays the conversion time information you have selected.

   Conversion Time options for a Monthly schedule

   Automatically convert latest recovery points - Monthly	Converts the latest recovery points to virtual disks using a monthly schedule.
   Default	Lets you use the default conversion schedule.
   Start time	Lets you select the time you want the conversion to start.
   Days of the month	Lets you select the day of the month that you want the conversion to take place.
   Details	Displays the conversion time information you have selected.

   Conversion Time options for an Only Run Once schedule

   Automatically convert latest recovery points - Only run once	Runs the conversion one time on the date and at the time that you specify.
   Date	Lets you select the day, month, and year that you want the conversion to run.
   Time	Lets you select the time that you want the conversion to start.
   Details	Displays the conversion time information you have selected.

8. If you want to run the new conversion job immediately, click Run conversion now.

   This option is not available if you selected the Only run once option in the Conversion Time panel.

9. Click Finish.