Dynamic Multi-Pathing 7.3.1 Administrator's Guide - AIX
- Understanding DMP
- Setting up DMP to manage native devices
- About setting up DMP to manage native devices
- Displaying the native multi-pathing configuration
- Migrating LVM volume groups to DMP
- Migrating to DMP from EMC PowerPath
- Migrating to DMP from Hitachi Data Link Manager (HDLM)
- Migrating to DMP from IBM Multipath IO (MPIO) or MPIO path control module (PCM)
- Using Dynamic Multi-Pathing (DMP) devices with Oracle Automatic Storage Management (ASM)
- Enabling Dynamic Multi-Pathing (DMP) devices for use with Oracle Automatic Storage Management (ASM)
- Removing Dynamic Multi-Pathing (DMP) devices from the listing of Oracle Automatic Storage Management (ASM) disks
- Migrating Oracle Automatic Storage Management (ASM) disk groups on operating system devices to Dynamic Multi-Pathing (DMP) devices
- Adding DMP devices to an existing LVM volume group or creating a new LVM volume group
- Removing DMP support for native devices
- Dynamic Multi-Pathing for the Virtual I/O Server
- About Dynamic Multi-Pathing in a Virtual I/O server
- About the Volume Manager (VxVM) component in a Virtual I/O server
- Configuring Dynamic Multi-Pathing (DMP) on Virtual I/O server
- Configuring Dynamic Multi-Pathing (DMP) pseudo devices as virtual SCSI devices
- Extended attributes in VIO client for a virtual SCSI disk
- Administering DMP
- About enabling and disabling I/O for controllers and storage processors
- About displaying DMP database information
- Displaying the paths to a disk
- Setting customized names for DMP nodes
- Configuring DMP for SAN booting
- Administering the root volume group (rootvg) under DMP control
- Running the bosboot command when LVM rootvg is enabled for DMP
- Extending an LVM rootvg that is enabled for DMP
- Reducing the native rootvg that is enabled for DMP
- Mirroring the root volume group
- Removing the mirror for the root volume group (rootvg)
- Cloning a LVM rootvg that is enabled for DMP
- Cleaning up the alternate disk volume group when LVM rootvg is enabled for DMP
- Using mksysb when the root volume group is under DMP control
- Upgrading Dynamic Multi-Pathing and AIX on a DMP-enabled rootvg
- Using Storage Foundation in the logical partition (LPAR) with virtual SCSI devices
- Setting up DMP for vSCSI devices in the logical partition (LPAR)
- About disabling DMP for vSCSI devices in the logical partition (LPAR)
- Preparing to install or upgrade Storage Foundation with DMP disabled for vSCSI devices in the logical partition (LPAR)
- Disabling DMP multi-pathing for vSCSI devices in the logical partition (LPAR) after installation or upgrade
- Adding and removing DMP support for vSCSI devices for an array
- How DMP handles I/O for vSCSI devices
- Running alt_disk_install, alt_disk_copy and related commands on the OS device when DMP native support is enabled
- Administering DMP using the vxdmpadm utility
- Retrieving information about a DMP node
- Displaying consolidated information about the DMP nodes
- Displaying the members of a LUN group
- Displaying paths controlled by a DMP node, controller, enclosure, or array port
- Displaying information about controllers
- Displaying information about enclosures
- Displaying information about array ports
- User-friendly CLI outputs for ALUA arrays
- Displaying information about devices controlled by third-party drivers
- Displaying extended device attributes
- Suppressing or including devices from VxVM control
- Gathering and displaying I/O statistics
- Setting the attributes of the paths to an enclosure
- Displaying the redundancy level of a device or enclosure
- Specifying the minimum number of active paths
- Displaying the I/O policy
- Specifying the I/O policy
- Disabling I/O for paths, controllers, array ports, or DMP nodes
- Enabling I/O for paths, controllers, array ports, or DMP nodes
- Renaming an enclosure
- Configuring the response to I/O failures
- Configuring the I/O throttling mechanism
- Configuring Subpaths Failover Groups (SFG)
- Configuring Low Impact Path Probing (LIPP)
- Displaying recovery option values
- Configuring DMP path restoration policies
- Stopping the DMP path restoration thread
- Displaying the status of the DMP path restoration thread
- Configuring Array Policy Modules
- Administering disks
- About disk management
- Discovering and configuring newly added disk devices
- Partial device discovery
- About discovering disks and dynamically adding disk arrays
- About third-party driver coexistence
- How to administer the Device Discovery Layer
- Listing all the devices including iSCSI
- Listing all the Host Bus Adapters including iSCSI
- Listing the ports configured on a Host Bus Adapter
- Listing the targets configured from a Host Bus Adapter or a port
- Listing the devices configured from a Host Bus Adapter and target
- Getting or setting the iSCSI operational parameters
- Listing all supported disk arrays
- Excluding support for a disk array library
- Re-including support for an excluded disk array library
- Listing excluded disk arrays
- Listing disks claimed in the DISKS category
- Displaying details about an Array Support Library
- Adding unsupported disk arrays to the DISKS category
- Removing disks from the DISKS category
- Foreign devices
- Changing the disk device naming scheme
- Discovering the association between enclosure-based disk names and OS-based disk names
- Dynamic Reconfiguration of devices
- About online Dynamic Reconfiguration
- Reconfiguring a LUN online that is under DMP control using the Dynamic Reconfiguration tool
- Manually reconfiguring a LUN online that is under DMP control
- Overview of manually reconfiguring a LUN
- Manually removing LUNs dynamically from an existing target ID
- Manually adding new LUNs dynamically to a new target ID
- About detecting target ID reuse if the operating system device tree is not cleaned up
- Scanning an operating system device tree after adding or removing LUNs
- Manually cleaning up the operating system device tree after removing LUNs
- Manually replacing a host bus adapter online
- Changing the characteristics of a LUN from the array side
- Upgrading the array controller firmware online
- Event monitoring
- Performance monitoring and tuning
- About tuning Dynamic Multi-Pathing (DMP) with templates
- DMP tuning templates
- Example DMP tuning template
- Tuning a DMP host with a configuration attribute template
- Managing the DMP configuration files
- Resetting the DMP tunable parameters and attributes to the default values
- DMP tunable parameters and attributes that are supported for templates
- DMP tunable parameters
- DMP driver tunables
- Appendix A. DMP troubleshooting
- Appendix B. Reference
DMP tuning templates
The template mechanism enables you to tune DMP parameters and attributes by dumping the configuration values to a file, or to standard output.
DMP supports tuning the following types of information with template files:
DMP tunable parameters.
DMP attributes defined for an enclosure, array name, or array type.
Veritas naming scheme parameters.
The template file is divided into sections, as follows:
DMP Tunables | Applied to all enclosures and arrays. |
Namingscheme | Applied to all enclosures and arrays. |
Arraytype | Use to customize array types. Applied to all of the enclosures of the specified array type. |
Arrayname | Use if particular arrays need customization; that is, if the tunables vary from those applied for the array type. Attributes in this section are applied to all of the enclosures of the specified array name. |
Enclosurename | Applied to the enclosures of the specified Cab serial number and array name. Use if particular enclosures need customization; that is, if the tunables vary from those applied for the array type and array name. |
Loading is atomic for the section. DMP loads each section only if all of the attributes in the section are valid. When all sections have been processed, DMP reports the list of errors and warns the user. DMP does not support a partial rollback. DMP verifies the tunables and attributes during the load process. However, Veritas recommends that you check the configuration template file before you attempt to load the file. Make any required corrections until the configuration file validates correctly.
The attributes are given priority in the following order when a template is loaded:
Enclosure Section > Array Name Section > Array Type Section
If all enclosures of the same array type need the same settings, then remove the corresponding array name and enclosure name sections from the template. Define the settings only in the array type section. If some of the enclosures or array names need customized settings, retain the attribute sections for the array names or enclosures. You can remove the entries for the enclosures or the array names if they use the same settings that are defined for the array type.
When you dump a configuration file from a host, that host may contain some arrays which are not visible on the other hosts. When you load the template to a target host that does not include the enclosure, array type, or array name, DMP ignores the sections.
You may not want to apply settings to non-shared arrays or some host-specific arrays on the target hosts. Be sure to define an enclosure section for each of those arrays in the template. When you load the template file to the target host, the enclosure section determines the settings. Otherwise, DMP applies the settings from the respective array name or array type sections.