Veritas Appliance Management Guide

Last Published:
Product(s): Appliances (2.2)
Platform: Appliance Management Server
  1. Introduction
    1.  
      Overview
    2.  
      Changes introduced in Appliance Management Server 2.2
    3.  
      Operational notes
    4.  
      About the Appliance Management Console
    5.  
      About the Appliance Management Server
    6.  
      About the Appliance Management Agent
    7.  
      About the AMS and the agent topology
  2. Managing an AMS
    1.  
      About configuring an AMS
    2.  
      Configuring NetBackup appliances as AMS
    3.  
      Configuring AMS on NetBackup Virtual Appliance
    4.  
      Unconfiguring AMS on NetBackup appliances
    5.  
      About the AMS user role on NetBackup appliances
    6.  
      Granting the AMS role to a user or a user group on NetBackup appliances
    7.  
      About collecting AMS logs
  3. Using the Appliance Management Console
    1.  
      Logging on to the Appliance Management Console
    2.  
      Using the Home page
    3.  
      Changing passwords from the AMS
    4.  
      Limiting the bandwidth used for downloads
    5.  
      Logging out of the Appliance Management Console
  4. Managing appliances
    1.  
      Viewing the appliance details
    2.  
      Rebooting an appliance
    3.  
      Viewing performance charts for appliance
    4.  
      Exporting the appliance performance data
    5.  
      Viewing the capacity utilization of an appliance
    6.  
      Viewing the capacity utilization of multiple appliances
    7.  
      Adding appliances to the Appliance Management Console
    8.  
      Removing one or more agents from the Appliance Management Console
    9. About managing appliance software upgrades
      1.  
        Upgrading NetBackup appliance software
    10.  
      Updating firmware on NetBackup appliances
    11.  
      Running hardware tests on NetBackup appliances
    12. Managing EEBs
      1.  
        Installing EEBs
      2.  
        Uninstalling EEBs
    13. About staging packages
      1.  
        Considerations for staging packages
      2.  
        Staging packages for installation or upgrade
    14. About managing services on NetBackup appliances
      1.  
        Starting, stopping, or restarting services
    15.  
      Installing maintenance release and security patch packages on NetBackup appliances
  5. Monitoring activities and events
    1.  
      Accessing the Activity Monitor
    2.  
      Monitoring events
    3.  
      Accessing the NetInsights Console
  6. Managing the repository
    1.  
      About managing the repository
    2.  
      Guidelines for adding packages or files to the repository
    3.  
      Accessing the repository
    4.  
      Adding packages or files to the repository
    5.  
      Removing packages or files from the repository
  7. Applying management updates
    1.  
      Upgrading the AMS and the agents on NetBackup appliances
    2.  
      Managing AMS updates on NetBackup appliances
    3.  
      Performing automatic or manual agent updates on NetBackup appliances

Installing EEBs

Use the following procedure to install an EEB on an appliance.

Note:

You cannot install EEBs on more than 10 appliances at a time.

To install EEBs

  1. Make sure that the EEBs you want to install are located in the repository. See Adding packages or files to the repository.
  2. From the AMS Home page, select the appliances on which you want the EEBs installed. All appliances must have the same software version. After selecting appliances, click Install EEB.
  3. Confirm that the displayed information for the selected appliances is correct. Click the dropdown arrow to show EEBs that are already installed on each appliance. If the list is correct, click Next. To make changes, click Back.
  4. Select the appropriate EEBs from the repository list and click Install.