Veritas InfoScale™ Operations Manager 8.0.2 Add-ons User's Guide
- Section I. VCS Utilities Add-on 8.0.2
- Section II. Distribution Manager Add-on 8.0.2
- Section III. Fabric Insight Add-on 8.0.2
- Section IV. Patch Installer Add-on 1.0
- Introduction to Patch Installer Add-on
- Using Patch Installer Add-on
- Prerequisites for deploying SFHA hot fixes
- Deploying SFHA hot fixes
- Requirements for scripts to customize SFHA hot fix deployment
- Adding pre-installation and post-installation scripts to SFHA hot fixes
- Removing or replacing custom scripts for SFHA hot fixes
- Viewing information about SFHA hot fix deployment requests
- Section V. Storage Insight Add-on 8.0.2
- Performing the deep discovery of enclosures
- About Storage Insight Add-on
- About the discovery host
- About the network-attached storage discovery
- Adding HITACHI storage enclosures for deep discovery
- Adding EMC Symmetrix storage enclosures for deep discovery
- Adding IBM XIV storage enclosures for deep discovery
- Adding NetApp storage enclosures for deep discovery
- Adding EMC CLARiiON storage enclosures for deep discovery
- Adding HP EVA storage enclosures for deep discovery
- Adding IBM System Storage DS enclosures for deep discovery
- Adding EMC Celerra storage enclosures for deep discovery
- Adding EMC VNX storage enclosures for deep discovery
- Adding EMC VPLEX storage enclosures for deep discovery
- Adding 3PAR storage enclosures for deep discovery
- Adding IBM SVC storage enclosures for deep discovery
- Editing the deep discovery configuration for an enclosure
- Removing deep discovery for a storage enclosure
- Refreshing the enclosures that are configured for deep array discovery
- Monitoring the usage of thin pools
- Monitoring storage array metering data
- Managing LUN classifications
- Appendix A. Enclosure configuration prerequisites
- HITACHI enclosure configuration prerequisites
- EMC Symmetrix storage array configuration prerequisites
- Physical connection requirements for EMC Symmetrix enclosure
- Device setup requirements for EMC Symmetrix arrays
- Veritas InfoScale Operations Manager setup requirements for in-band EMC Symmetrix storage arrays
- Veritas InfoScale Operations Manager setup requirements to discover EMC Symmetrix storage arrays through remote SYMAPI servers
- IBM XIV enclosure configuration prerequisites
- NetApp storage enclosure configuration prerequisites
- EMC CLARiiON storage enclosures configuration prerequisites
- Hewlett-Packard Enterprise Virtual Array (HP EVA) configuration prerequisites
- IBM System Storage DS enclosure configuration prerequisites
- IBM SVC enclosure configuration prerequisites
- EMC Celerra enclosure configuration prerequisites
- EMC VNX storage enclosure configuration prerequisites
- EMC VPLEX storage enclosure configuration prerequisites
- 3PAR storage enclosure configuration prerequisites
- Appendix B. Commands used by Management Server for deep discovery of enclosures
- HITACHI storage enclosure commands
- EMC Symmetrix storage enclosure commands
- IBM XIV storage enclosures commands
- NetApp storage enclosure commands
- EMC CLARiiON storage enclosure commands
- HP EVA storage enclosure commands
- IBM System Storage DS enclosure commands
- EMC Celerra storage enclosure commands
- EMC VNX (Block) storage enclosure commands
- EMC VNX (File) storage enclosure commands
- EMC VPLEX storage enclosure commands
- 3PAR storage enclosure commands
- IBM SVC storage enclosure commands
- Performing the deep discovery of enclosures
- Section VI. Storage Insight SDK Add-on 8.0.2
- Overview of Storage Insight SDK Add-on 8.0.2
- Managing Veritas InfoScale Operations Manager Storage Insight plug-ins
- About creating Storage Insight plug-in
- About installing Storage Insight SDK Add-on
- About discovery script
- About the enclosure discovery command output
- --list encls command to discover all enclosures
- --list pdevs --encl enclosure Id command to discover all physical disks in an enclosure
- --list ldevs --encl enclosure Id command to discover all logical disks for an enclosure
- --list adapters --encl enclosure Id command to discover all adapters of an enclosure
- --list ports --encl enclosure Id command to discover all ports for an enclosure
- --list capacities --encl enclosure Id command to discover aggregate physical, RAID group, and logical capacities for an enclosure
- --list ldevpdevmap --encl enclosure Id command to discover logical disk-physical disk mapping for an enclosure
- --list ldevhostmap --encl enclosure Id command to discover logical device-host mapping for an enclosure
- --list meta-ldevs --encl enclosure Id command to discover the mapping of meta logical disks with segment logical disks for an enclosure
- --list raidgroups --encl enclosure Id command to discover RAID groups for an enclosure
- --list thinpools --encl enclosure Id command to discover all thin pools for an enclosure
- --list rgpdevmap --encl enclosure Id command to discover RAID group-physical disk mapping for an enclosure
- --list rgldevmap --encl enclosure Id command to discover RAID group-logical device mapping for an enclosure
- --list tpsrcldevmap --encl enclosure Id command to discover thin pool-source logical device mapping for an enclosure
- --list tpldevmap --encl enclosure Id command to discover thin pool logical device mapping for an enclosure
- --list replications --encl enclosure Id command to discover the replications for an enclosure
- About additional scripts
- About device identifiers
- Storage Insight Plug-in sample
- Creating a Storage Insight plug-in
- Editing a Storage Insight plug-in
- Testing a Storage Insight plug-in
- About creating Storage Insight plug-in
- Section VII. Storage Provisioning and Enclosure Migration Add-on 8.0.2
- Provisioning storage
- About storage provisioning
- About creating a storage template
- Creating a storage template using VxFS file systems
- Creating a storage template using NTFS file systems
- Creating a storage template using volumes
- Updating a storage template
- Provisioning storage
- Uploading storage templates
- Downloading storage templates
- Deleting storage templates
- Locking storage templates
- Unlocking storage templates
- Migrating volumes
- Provisioning storage
- Section VIII. Application Migration Add-on
- Introduction to Application Migration Add-on
- Creating and managing an application migration plan
- Supported versions and platforms
- User privileges
- Prerequisites for creating an application migration plan
- Prerequisites for migration to AWS
- VVR Replication: Environment variables used in application migration
- Creating an application migration plan
- Understanding user-defined tasks
- Understanding application migration operations
- Understanding the cleanup operation
- Understanding the tasks executed in each operation
- Validations performed before migration plan execution
- Executing the application migration plan
- Editing an application migration plan
- Deleting application migration plan(s)
- Exporting application migration plan(s)
- Importing application migration plan(s)
- Viewing historical runs
- Viewing properties of an application migration plan
- Application migration logs
- Index
Creating a customized solution in Veritas InfoScale Operations Manager
In Veritas InfoScale Operations Manager, you can create a customized solution that you can deploy on one or more managed hosts and Management Server. You can use the Create New Solution wizard panel to create a customized solution.
Before using the wizard, you must create a setup and unsetup script that you can browse to from the wizard.
The setup script must be named as follows:
setup.pl
The unsetup script must be named as follows:
unsetup.pl
See the following topic for script samples.
See Sample scripts for customized solutions .
To create a customized solution
- In the Home page on the Management Server console, click Settings.
- Click the Settings tab and click Deployment.
- Click Create New Solution.
- In the Create New Solution wizard panel, enter the relevant information, as follows:
Name
Enter a name for the customized solution that you create.
Version
Enter a version for the customized solution that you create.
Description
Enter any additional information on the customized solution that you create.
MH Component
Select this check box if you want to deploy the solution on managed hosts.
MS Component
Select this check box if you want to deploy the solution on Management Server.
MH/MS Versions
Select the versions of either the managed hosts, Management Server, or both, on which you want to deploy the solution.
Upload platform specific files:
Type
Select the platform on which you want to deploy the customized solution that you create.
You can select from the following options:
Linux
SunOS
Windows
AIX
HP-UX
Cross Platform
Select this check box if you want to deploy the solution across platforms.
If you select this check box, you cannot select a specific platform in the Type field.
Setup Script
Browse to select the setup script for the solution that you create.
Click Upload to upload the setup script to Veritas InfoScale Operations Manager.
UnSetup Script
Browse to select the unsetup script for the solution that you create.
Click Upload to upload the unsetup script to Veritas InfoScale Operations Manager.
Additional Files
Browse to select any additional files to include in the solution that you create.
Click Upload to upload the additional files to Veritas InfoScale Operations Manager.
- Click Finish to create a solution.
More Information