NetBackup IT Analytics Data Collector Installation Guide for Virtualization Manager

Last Published:
Product(s): NetBackup IT Analytics (11.2)
  1. Pre-Installation setup for VMware
    1.  
      Pre-Installation setup for VMware
    2.  
      VMware Data Collection
    3. Prerequisites for adding data collectors (VMware)
      1.  
        Virtualization Manager: Collection of VMware Data
      2. Configure VMware Access
        1.  
          Pre-requisites for vSAN Data Collection
        2.  
          Creating a VMware Read-Only User with Required Permissions
    4.  
      Installation overview (VMware)
    5.  
      Add a VMware Data Collector policy
    6. Datastore scan collection
      1.  
        Reports impacted by Datastore Collection
  2. Pre-Installation setup for IBM VIO
    1.  
      Pre-Installation setup for IBM VIO
    2.  
      Prerequisites for adding data collectors (IBM VIO)
    3.  
      Installation overview (IBM VIO)
    4.  
      Adding servers for the IBM VIO Data Collector policy
    5.  
      VIO servers (IBM Virtual I/O Servers)
    6.  
      LPAR clients (IBM Logical Partitioning Clients) managed by VIO servers
    7.  
      HMC (IBM Hardware Management Console)
    8.  
      Add an IBM VIO Data Collector policy
  3. Pre-Installation setup for Microsoft Hyper-V
    1.  
      Pre-Installation setup for Microsoft Hyper-V
    2.  
      Prerequisites for adding data collectors (Microsoft Hyper-V)
    3.  
      Installation overview (Microsoft Hyper-V)
    4.  
      Add a Microsoft Hyper-V Data Collector policy
  4. Install the Data Collector software
    1.  
      Introduction
    2.  
      Installing the WMI Proxy service (Windows host resources only)
    3.  
      Testing WMI connectivity
    4.  
      Considerations to install Data Collector on non-English systems
    5.  
      Install Data Collector Software on Windows
    6.  
      Install Data Collector software on Linux
    7.  
      Deploy Data Collector in native Kubernetes environment
    8.  
      Configure Data Collector manually for Veritas NetBackup
    9.  
      Install Data Collector binaries on Windows (without configuration)
    10.  
      Install Data Collector binaries on Linux host (without configuration)
  5. Validating data collection
    1.  
      Validation methods
    2.  
      Data Collectors: Vendor-Specific validation methods
    3. Working with on-demand Data Collection
      1.  
        View real-time logging during an on-demand collection
      2.  
        Generating debug level logs during an on-demand collection
    4.  
      Using the CLI check install utility
    5.  
      List Data Collector configurations
  6. Uninstall the Data Collector
    1.  
      Uninstall the Data Collector on Linux
    2.  
      Uninstall the Data Collector on Windows
  7. Manually start the Data Collector
    1.  
      Introduction
  8. Appendix A. Firewall configuration: Default ports
    1.  
      Firewall configuration: Default ports

Prerequisites for adding data collectors (IBM VIO)

Identify a server where the Data Collector software will be installed. Server requirements include:

  • 64-bit OS. See the Certified Configurations Guide for supported operating systems.

  • When the NetBackup IT Analytics system collects data from any vendor subsystem, the collection process expects name/value pairs to be in US English, and requires the installation to be done by an Administrator with a US English locale. The server's language version can be non-US English.

  • Support Amazon Corretto 11. Amazon Corretto is a no-cost, multi-platform, production-ready distribution of the Open Java Development Kit (OpenJDK).

  • For performance reasons, do not install Data Collectors on the same server as the NetBackup IT Analytics Portal. However, if you must have both on the same server, verify that the Portal and Data Collector software do not reside in the same directory.

  • Install only one Data Collector on a server (or OS instance).

  • Note the port used by the IBM VIO Data Collector: SSH 22, telnet 23.

  • Data Collection retrieves data from servers in the following order:

    • VIO Servers (Virtual I/O Servers): Enable Capacity, HBA, Volume Manager, and Multi-pathing probes in Host Discovery and Collection. To use the VIO restricted shell to execute commands to collect data, configure the advanced parameter, USE_VIO_RESTRICTED_SHELL.

    • LPAR Clients (Logical Partitioning Clients) Managed by VIO Servers: Enable Capacity, HBA, Volume Manager, and Multi-pathing probes in Host Discovery and Collection.

      For newly discovered LPAR Clients, probes can be configured directly from the data collector policy.

  • Gather the following required configuration details for the VIO Data Collector Policy:

    • LPAR Management Server: IP address or server name of the IBM LPAR Management Server (HMC or IVM).

    • User ID & Password: Credentials for the LPAR Management Server.

    • For the VIO server: Private Key File and Known Hosts File and Path.