Product Documentation

Enter Resiliency Manager instance Name

Enter the name of the Resiliency Manager instance.

Enter IMS instance Name

Enter the name of the IMS instance.

Enter Replication Gateway instance Name

Enter the name of the Replication Gateway instance.

Enter KMS Key ARN if the staging disk needs to be encrypted

If you want to encrypt staging disks attached to the gateways using the KMS key, then select ARN of the respective KMS from the KMS Key drop-down. Else keep the default value as 'Not Encrypted'.

Deploy Veritas Data Gateway

Optional parameter

You need to deploy Data Gateway only if you want to use Object Storage for replication.

See About Data Gateway.

Create 'ImportSnapshotRole' AWS IAM role for VRP?

Resiliency Platform requires ImportSnapshotRole for recovery of assets to AWS. Select Yes to create the role. Make sure that you have iam: CreateRole permission.

Select No if you already have ImportSnapshotRole role.

Create 'VRPApplianceStackUpdateRole' AWS IAM role for VRP?

Resiliency Platform requires a role with certain permissions for upgrading AWS cloud infrastructure.

See About applying updates to Resiliency Platform.

If you don't have a role with these permissions, select yes to create a default role. Make sure that you have iam: CreateRole permission.

Select No if you already have a role with the required permissions.

Select Instance Type

This field is auto-populated with the best fit instance type. You can change the default value, if required.

Select SSH Key pair

Select the appropriate SSH key pair. While selecting the SSH key pair, ensure that you already have access to the pair. This is critical because SSH key pair is the only way to log in to the system and you cannot change the SSH key pair after the EC2 instance gets created.

Select Staging disk size for Replication Gateway

Enter the size of the staging disk for Replication Gateway in the unit of GB. The minimum supported disk size of 50GB lets you protect up to 4 virtual machines and to protect more virtual machines an additional staging storage of 12 GB per virtual machine is required.

Name of the IAM role that the Resiliency Platform appliances should use to update their CloudFormation stacks

Enter the name of IAM role that the Resiliency Platform appliances should use to update AWS infrastructure during upgrade.

See About applying updates to Resiliency Platform.

Leave unchanged if you have chosen to create the default role for this purpose.

Select VPC

Ensure the following while selecting the VPC:

Which Network Interface should be used for communication with other Resiliency Managers?

Select the network interface that can be used to communicate with other Resiliency Managers in the resiliency domain.

NAT settings are applicable for this role. If you want to use this network interface in a NAT environment, provide NAT details in the form.

Which Network Interface should be used for communication with Infrastructure Management Servers?

Select the network interface that can be used to communicate with Infrastructure Management Servers.

NAT settings are applicable for this role. If you want to use this network interface in a NAT environment, provide NAT details in the form.

Which Network Interfaces should be used for accessing product User Interface?

Select the network interfaces that can be used to access the Resiliency Manager web user interface.

NAT settings are applicable for this role. If you want to use this network interface in a NAT environment, provide NAT details in the form.

Which Network Interface should be used as the default gateway?

Select the network interface that can be used by default for outgoing communication.

Select Subnet for the eth0 Network Interface

Select the subnet which can be connected to the eth0 network interface.

Select Subnet for the eth1 Network Interface

Select the subnet which can be connected to the eth1 network interface.

This input is only relevant if you have selected eth1 for one of the communication roles. You should provide a valid subnet always.

Which Network Interface should be used for communication with other Resiliency Managers?

Select the network interface that can be used to communicate with Resiliency Managers.

NAT settings are applicable for this role. If you want to use this network interface in a NAT environment, provide NAT details in the form.

Which Network Interface should be used for communication with Replication Gateways?

Select the network interface that can be used to communicate with Replication Gateways.

NAT settings are applicable for this role. If you want to use this network interface in a NAT environment, provide NAT details in the form.

Which Network Interface should be used as the default gateway?

Select the network interface that can be used by default for outgoing communication.

Select Subnet for the eth0 Network Interface

Select the subnet which can be connected to the eth0 network interface.

Select Subnet for the eth1 Network Interface

Select the subnet which can be connected to the eth1 network interface.

This input is only relevant if you have selected eth1 for one of the communication roles. You should provide a valid subnet always.

Which Network Interface should be used for communication with the Infrastructure Management Server?

Select the network interface that can be used to communicate with the Infrastructure Management Server.

NAT settings are applicable for this role. If you want to use this network interface in a NAT environment, provide NAT details in the form.

Which Network Interface should be used for communication with peer gateways?

Select the network interface that can be used to communicate with peer gateways.

NAT settings are applicable for this role. If you want to use this network interface in a NAT environment, provide NAT details in the form.

Which Network Interface should be used for communication with the workload Virtual Machines?

Select the network interfaces that can be used for communication with the workload Virtual Machines.

NAT settings are applicable for this role. If you want to use this network interface in a NAT environment, provide NAT details in the form.

Which Network Interface should be used as the default gateway?

Select the network interface that can be used by default for outgoing communication.

Select Subnet for the eth0 Network Interface

Select the subnet which can be connected to the eth0 network interface.

Select Subnet for the eth1 Network Interface

Select the subnet which can be connected to the eth1 network interface.

This input is only relevant if you have selected eth1 for one of the communication roles. You should provide a valid subnet always.

Specify NTP Server

FQDN or IP address of the NTP server to be used for the instances. In case of multiple values, enter the space-separated values.

Select TimeZone

Select the timezone for the instances.

Data Gateway deployment bucket name

Make sure that the deployment bucket pre-exists and is created in the local region where the CFT is being deployed.

Data Gateway bucket name

You can use an existing bucket or create a new bucket.

Does the Data Gateway bucket already exist

Select Yes if the Data Gateway already exists.

If you want to re-use an existing Data Gateway Bucket, that bucket should also be local to the region in which the CFT is being deployed.

SNS topic protocol

Select a protocol from the list.

SNS topic endpoint

Provide an endpoint that is appropriate for the selected SNS topic protocol.