Product Documentation

Last Published:
Product(s): Resiliency Platform & CloudMobility (3.4)
  1. Section I. Overview and planning
    1. Introduction to Resiliency Platform
      1.  
        About Veritas Resiliency Platform
      2. About Resiliency Platform features and components
        1.  
          About Resiliency Domain
        2.  
          About Resiliency Manager
        3.  
          About Infrastructure Management Server (IMS)
        4.  
          About Replication Gateways
        5.  
          About Data Gateway
        6.  
          Resiliency Platform deployment infrastructure
      3.  
        About Resiliency Platform capabilities
      4. Replication in a Resiliency Platform deployment
        1.  
          About Direct mode replication
        2.  
          About Object Storage mode replication
      5. About Veritas Resiliency Platform Data Mover
        1.  
          How Resiliency Platform Data Mover works
        2.  
          Architecture of Resiliency Platform Data Mover
        3.  
          How Veritas Resiliency Platform Data Mover handles virtual machine writes
        4.  
          About replication tunables
        5. About synchronization used by Resiliency Platform Data Mover
          1.  
            About full synchronization of data
          2.  
            About incremental synchronization
      6.  
        About managing VMware Storage vMotion in Resiliency Platform
      7.  
        About managing VMware snapshots in Resiliency Platform
      8.  
        About IPv6 network support in Resiliency Platform
      9.  
        Planning a resiliency domain for efficiency and fault tolerance
      10.  
        On-boarding with Resiliency Platform
      11.  
        About Resiliency Platform APIs
    2. Recovery options using Resiliency Platform
      1.  
        Recovering physical machines to AWS using Resiliency Platform Data Mover
      2.  
        Recovering VMware virtual machines to Orange Recovery Engine
      3.  
        Recovering VMware virtual machines to AWS
      4.  
        Recovering Hyper-V virtual machines to AWS
      5.  
        Migrating VMware virtual machines to AWS
      6.  
        Recovering VMware virtual machines to Azure
      7.  
        Recovering Hyper-V virtual machines to Azure
      8.  
        Recovering VMware virtual machines to HUAWEI CLOUD
      9.  
        Recovering VMware virtual machines to OpenStack
      10.  
        Recovering Hyper-V virtual machines to OpenStack
      11.  
        Recovering physical machines to vCloud Director using Resiliency Platform Data Mover
      12.  
        Recovering VMware virtual machines to vCloud Director
      13.  
        Recovering Hyper-V virtual machines to vCloud Director
      14.  
        Recovering VMware virtual machines to vCloud Director without adding vCenter server
      15.  
        Recovering Hyper-V virtual machines to vCloud Director without adding Hyper-V server
      16.  
        Recovering virtual machines from vCloud Director to vCloud Director
      17.  
        Recovering physical machines to Orange Recovery Engine using Resiliency Platform Data Mover
      18.  
        Recovering physical machines to VMware virtual machines on an on-premises data center using Resiliency Platform Data Mover
      19.  
        Recovering VMware virtual machines to on-premises data center using Resiliency Platform Data Mover
      20.  
        Recovering VMware virtual machines from VMware to VMware using NetBackup
      21.  
        Recovering virtual machines from VMware to AWS using NetBackup Automated disaster recovery
      22.  
        Recovering VMware virtual machines using third-party replication technology
      23.  
        Recovering Hyper-V virtual machines using third-party replication technology
      24.  
        Recovering Applications using third-party replication technology
      25.  
        Recovering InfoScale applications
    3. Deployment checklist
      1.  
        Checklist for recovery of VMware virtual machines to AWS
      2.  
        Checklist for recovery of physical machines to AWS using Resiliency Platform Data Mover
      3.  
        Checklist for recovery of Hyper-V virtual machines to AWS
      4.  
        Checklist for recovery of VMware virtual machines to Azure
      5.  
        Checklist for recovery of Hyper-V virtual machines to Azure
      6.  
        Checklist for recovery of VMware virtual machines to HUAWEI CLOUD
      7.  
        Checklist for recovery of VMware virtual machines to Orange Recovery Engine
      8.  
        Checklist for recovery of physical machines to Orange Recovery Engine using Resiliency Platform Data Mover
      9.  
        Checklist for recovery of VMware virtual machines to OpenStack
      10.  
        Checklist for recovery of Hyper-V virtual machines to OpenStack
      11.  
        Checklist for recovery of VMware virtual machines from on-premises data center to vCloud Director
      12.  
        Checklist for recovery of Hyper-V virtual machines from on-premises data center to vCloud Director
      13.  
        Checklist for recovery of virtual machines from vCloud Director to vCloud Director
      14.  
        Checklist for recovery of physical machines to vCloud Director using Resiliency Platform Data Mover
      15.  
        Checklist for recovery of physical machines to on-premises data center using Resiliency Platform Data Mover
      16.  
        Checklist for recovery of VMware virtual machines to on-premises data center using Resiliency Platform Data Mover
      17.  
        Checklist for recovery of VMware virtual machines using NetBackup
      18.  
        Checklist for recovery of VMware virtual machines to AWS cloud using NetBackup
      19.  
        Checklist for recovery of VMware virtual machines to on-premises data center using third-party replication technology
      20.  
        Checklist for recovery of Hyper-V virtual machines to on-premises data center using third-party replication technology
      21.  
        Checklist for recovery of applications to on-premises data center using third-party replication technology
      22.  
        Checklist for recovery of InfoScale applications
      23.  
        Prerequisites for vCenter server
      24.  
        Prerequisites for ESXi cluster nodes
      25.  
        Support matrix for RDM disk support
    4. System requirements
      1.  
        System resource requirements for Resiliency Platform
      2.  
        Network and firewall requirements
      3.  
        Ports required for Resiliency Manager
      4.  
        Ports required for IMS
      5.  
        Ports required for recovery of assets using NetBackup
      6.  
        Ports required for hosts
      7.  
        Ports required for recovery of assets to AWS
      8.  
        Ports required for recovery of assets to Azure
      9.  
        Ports required for recovery of assets to Orange Recovery Engine
      10.  
        Ports required for recovery of assets to HUAWEI CLOUD
      11.  
        Ports required for recovery of assets to OpenStack
      12.  
        Ports required for recovery of assets to vCloud Director
      13.  
        Ports required for recovery of physical machines to on-premises data center
      14.  
        Ports required for recovery of assets to on-premises data center using Resiliency Platform Data Mover
      15.  
        Ports required for Replication Gateway used for recovery to cloud data center
      16.  
        Ports required for Replication Gateway for recovery to vCloud Director without adding the vCenter or Hyper-V server
      17.  
        Ports required for Replication Gateway used for recovery of physical machines
      18.  
        Ports required for Replication Gateway used for recovery of VMware virtual machines to on-premises data center
      19.  
        Ports required for recovery of assets to on-premises data center using third-party replication technology
      20.  
        Ports required for recovery of InfoScale applications
    5. Manage licenses
      1.  
        Managing licenses
      2.  
        About licenses
      3.  
        Viewing and installing licenses
      4.  
        Replacing a license
      5.  
        Removing a license
      6.  
        Viewing the License Entitlement report
    6. Using the Web Console
      1.  
        About the web console
      2. Tour of the Resiliency Platform web console screen
        1.  
          Menu bar options
        2.  
          Navigation pane options
        3.  
          About the Resiliency Platform Dashboard
      3.  
        Using Quick Actions for shortcuts to common tasks
      4.  
        Filtering and searching for objects in the web console
      5.  
        About settings in the web console
      6.  
        About permissions for operations in the console
  2. Section II. Deploying and configuring the virtual appliances
    1. Deploy and configure
      1.  
        About deploying the Resiliency Platform virtual appliances
      2.  
        Downloading the Veritas Resiliency Platform virtual appliances
      3.  
        Downloading the Resiliency Platform virtual appliances for recovery to vCloud
      4.  
        Deploying the virtual appliance through VMware vSphere Client
      5.  
        Deploying the virtual appliance through Hyper-V Manager
      6. Deploying the virtual appliances in AWS through AWS Marketplace
        1.  
          Prerequisites for deploying the virtual appliances in AWS
        2.  
          Configuring Amazon VPC for deployment using CloudFormation Templates
        3.  
          Providing inputs for Resiliency Platform CloudFormation Templates
      7. Deploying the virtual appliances in AWS using OVA files
        1.  
          Permissions required for IAM roles for Resiliency Manager, IMS, and Replication Gateway
        2.  
          Uploading the OVA file using web-based method
        3.  
          Uploading the OVA file using command-line method
        4.  
          Creating Amazon Machine Image
        5.  
          Launching the instances of virtual appliances
      8. Deploying the Data Gateway in AWS
        1.  
          Prerequisites for deploying the Data Gateway in AWS
        2.  
          Permissions for deploying Data Gateway in AWS
        3.  
          Example IAM policies
        4.  
          About Data Gateway monitoring through CloudWatch alarms
        5.  
          Resources created after Data Gateway deployment
        6.  
          Creating a role to deploy the Data Gateway in AWS
      9. Deploying the virtual appliances in Azure using PowerShell script
        1.  
          Prerequisites for deploying the virtual appliances in Azure
        2.  
          Installing Azure PowerShell module
        3.  
          Constraints when you deploy the virtual appliances in Azure
      10. Deploying the virtual appliances in Azure through Azure Marketplace
        1.  
          Providing inputs for deploying virtual appliances through Azure Marketplace
      11. Deploying the virtual appliances in vCloud
        1.  
          Prerequisites for deploying the virtual appliances in vCloud Director
        2.  
          Uploading OVA files to catalog
      12.  
        Deploying the virtual appliance in OpenStack through OpenStack dashboard
      13.  
        Deploying the virtual appliance in OpenStack using volumes
      14. Deploying the virtual appliances in HUAWEI CLOUD
        1.  
          Prerequisites for deploying the virtual appliances in HUAWEI CLOUD
        2.  
          Uploading image files to HUAWEI CLOUD
        3.  
          Registering the disk image as a private image
        4.  
          Launching the system disk image instance
        5.  
          Creating the data disk image
      15. Deploying the virtual appliances in Orange Recovery Engine
        1.  
          Prerequisites for deploying the virtual appliances in Orange Recovery Engine
        2.  
          Uploading image files to OBS
        3.  
          Registering the disk image as a private image
        4.  
          Launching the system disk image instance
        5.  
          Creating the data disk image
      16. About configuring the Resiliency Platform components
        1.  
          Prerequisites for configuring Resiliency Platform components
        2. Configuring the Resiliency Manager or IMS
          1.  
            Configuring network settings for Resiliency Manager
          2.  
            Configuring network settings for IMS
        3. Configuring the Replication Gateways
          1.  
            Configuring network settings for Replication Gateway
          2.  
            About FIPS enablement for Replication Gateway appliance
        4.  
          Password policies for Resiliency Platform virtual appliance
        5.  
          About NAT support in Veritas Resiliency Platform
      17.  
        Uninstalling Resiliency Platform components when deployed through AWS Marketplace
      18. Virtual appliance security features
        1.  
          Physical security
        2.  
          Operating system security
        3.  
          Management Security
        4.  
          Network security
        5.  
          Access control security
      19. About hotfixes
        1.  
          Downloading the Resiliency Platform hotfix
        2.  
          Applying and uninstalling the hotfix to the virtual appliance
      20.  
        References
    2. Apply Updates
      1. About applying updates to Resiliency Platform
        1.  
          Pre-upgrade tasks
        2.  
          Post upgrade tasks
      2.  
        Adding disks with duplicate UUID for a Replication Gateway Appliance
      3.  
        Upgrading AWS infrastructure when deployed through AWS Marketplace
      4.  
        Upgrading AWS infrastructure when deployed using OVA files
      5.  
        Prerequisites for a repository server
      6.  
        Setting up the repository server
      7.  
        Adding a repository server in Resiliency Platform
      8.  
        Assigning a repository server in Resiliency Platform
      9.  
        Applying updates to virtual appliances using the console
      10.  
        Applying updates to virtual appliance using klish menu
      11.  
        Refreshing the information about applicable updates
      12.  
        Removing an update from the repository server
      13.  
        Removing a repository server
      14.  
        Downloading the Resiliency Platform update
      15. Setting up the YUM server
        1.  
          Configuring the YUM repository server
        2.  
          Adding an update to the YUM repository server without external access
      16.  
        Applying update for InfoScale environment
      17.  
        Applying updates to the hosts
      18.  
        Applying update on Resiliency Managers
      19.  
        Applying updates to the Veritas Data Gateway
  3. Section III. Setting up and managing the resiliency domain
    1. Managing the resiliency domain
      1.  
        Setting up the resiliency domain
      2.  
        Connecting to the Resiliency Platform web console
      3. Getting started with a new Resiliency Platform configuration
        1.  
          Getting started wizard - adding AWS data center
        2.  
          Getting started wizard - adding Azure data center
        3.  
          Getting started wizard - adding HUAWEI CLOUD data center
        4.  
          Getting started wizard - adding OpenStack data center
        5.  
          Getting started wizard - adding vCloud Director data center
      4. Managing Resiliency Managers
        1.  
          Adding a Resiliency Manager to an existing resiliency domain
        2.  
          Viewing the status of a Resiliency Manager in a data center
        3.  
          Performing data resync on a Resiliency Manager
        4.  
          Renaming a Resiliency Manager
        5.  
          Removing a Resiliency Manager from a resiliency domain
      5. Managing Infrastructure Management Servers
        1.  
          How Infrastructure Management Servers relate to data centers
        2.  
          Adding an IMS
        3.  
          Regenerating registration URL for an IMS
        4.  
          Removing an IMS
        5.  
          Modifying an IMS
        6.  
          Reconnecting the IMS to a Resiliency Manager
      6. Managing on-premises data centers
        1.  
          Adding on-premises data centers
        2.  
          Editing on-premises data centers
        3.  
          Removing on-premises data centers
        4.  
          Viewing data centers
      7.  
        Adding OpenStack private cloud instance
      8. Managing cloud configurations
        1.  
          Adding AWS cloud data center
        2.  
          Adding Azure cloud data center
        3. Adding HUAWEI CLOUD data center
          1.  
            API permissions required for HUAWEI CLOUD
          2.  
            Example of a policy statement for HUAWEI CLOUD
        4. Adding Orange Recovery Engine data center
          1.  
            API permissions required for Orange Recovery Engine
          2.  
            Example of a policy statement for Orange Recovery Engine
        5.  
          Adding OpenStack cloud data center
        6.  
          Adding vCloud Director cloud data center
        7.  
          Editing cloud configuration
        8.  
          Refreshing cloud
        9.  
          Removing the cloud configuration
      9. Managing private cloud configurations
        1.  
          Adding OpenStack private cloud instance
        2.  
          Editing the private cloud configuration
        3.  
          Refreshing the private cloud configuration
        4.  
          Removing the private cloud configuration
    2. Integrating with NetBackup
      1.  
        About NetBackup and NetBackup Appliances
      2.  
        About protecting assets with NetBackup using Resiliency Platform
      3.  
        Prerequisites for integrating NetBackup with Resiliency Platform
      4. Recovering virtual machines to premises target data center
        1.  
          Adding NetBackup master server
        2.  
          Adding Resiliency Manager to NetBackup using a URL
        3.  
          Adding IMS to NetBackup master server as an additional server
        4.  
          Editing the NetBackup master server
        5.  
          Removing the NetBackup master server
        6.  
          Removing IMS from NetBackup master server
        7.  
          Refreshing the NetBackup master server
      5. Recovering virtual machines to cloud target data center
        1.  
          Adding NetBackup Cloud Recovery Server (CRS)
        2.  
          Editing the NetBackup Cloud Recovery Server
        3.  
          Removing the NetBackup Cloud Recovery Server
        4.  
          Refreshing the NetBackup Cloud Recovery Server
    3. Integrating with InfoScale Operations Manager
      1.  
        Support matrix for InfoScale applications
      2. Adding a Veritas InfoScale Operations Manager server
        1.  
          Prerequisites for managing Veritas InfoScale Operations Manager server using Resiliency Platform
        2.  
          Regenerating registration URL for a Veritas InfoScale Operations Manager server
      3.  
        Editing the details of a Veritas InfoScale Operations Manager server
      4.  
        Reconnecting the Veritas InfoScale Operations Manager to a Resiliency Manager
      5.  
        Deleting a Veritas InfoScale Operations Manager server
  4. Section IV. Adding the asset infrastructure
    1. Manage Resiliency Platform host assets
      1.  
        Adding the asset infrastructure
      2.  
        Managing host assets
      3.  
        About adding host assets
      4. Prerequisites for adding hosts
        1.  
          User account required for adding a Windows host
        2.  
          UAC settings required for adding a Windows host
      5.  
        Adding application hosts
      6.  
        Refreshing host discovery information
      7. Removing hosts
        1.  
          Removing Windows Install Hosts
      8.  
        Uninstalling the host package from a Linux host
      9.  
        Uninstalling the host package from a Windows host
      10.  
        Reasons for add host operation failure
      11. Preparing host for replication
        1.  
          Downloading Resiliency Platform host agent packages from IMS
        2.  
          Configuring Resiliency Platform host agent packages manually
        3.  
          Configuring password-less sudo privileges for user account on Linux host
      12.  
        Refreshing the replication host
      13.  
        Moving the replication host to another IMS
      14.  
        Removing the replication host
    2. Manage VMware assets
      1. Managing VMware virtualization servers
        1. Prerequisites for adding VMware virtualization servers
          1.  
            VMware vCenter Server privileges: configuring ESX servers
          2.  
            VMware vCenter Server privileges: basic monitoring of assets
          3.  
            VMware vCenter Server privileges: using third party replication
          4.  
            VMware vCenter Server privileges: replication to on-premises data center
          5.  
            VMware vCenter Server privileges: replication to cloud data center
          6.  
            VMware vCenter Server privileges: using NetBackup
      2.  
        About near real-time discovery of VMware events
      3.  
        Setting up near real-time discovery of VMware events
      4.  
        Configuring the VMware vCenter Server to generate SNMP traps
      5.  
        Adding VMware virtualization servers
      6.  
        Editing a VMware virtualization discovery configuration
      7.  
        Viewing the details of a VMware virtualization discovery configuration
      8.  
        Removing a VMware vCenter Server discovery configuration
      9.  
        Refreshing VMware vCenter Server discovery information
    3. Manage Veritas Replication VIB
      1.  
        Managing Veritas Replication VIB
      2. Installing Veritas Replication VIB
        1.  
          Prerequisites for installing Veritas Replication VIB
      3.  
        Validating Veritas Replication VIB installation
      4.  
        Upgrading Veritas Replication VIB
      5.  
        Uninstalling Veritas Replication VIB installation
    4. Manage Hyper-V assets
      1.  
        Managing Hyper-V assets
      2.  
        About Microsoft Hyper-V virtualization discovery
      3. Adding Hyper-V virtualization servers
        1.  
          Prerequisites for Microsoft Hyper-V virtualization discovery
      4.  
        Refreshing Hyper-V virtualization servers
      5.  
        Removing Hyper-V virtualization servers
      6.  
        Moving Hyper-V virtualization servers to another IMS
    5. Manage Gateways
      1.  
        Managing Replication Gateways
      2.  
        Adding a Replication Gateway
      3.  
        Refreshing a Replication Gateway
      4.  
        Removing a Replication Gateway
      5.  
        Moving a Replication Gateway to another IMS
      6.  
        Viewing Replication Gateways
      7. About Replication Gateway pair
        1.  
          Migrating virtual machines to different availability zones of AWS
      8.  
        Creating a Replication Gateway pair
      9.  
        Modifying encryption for a Replication Gateway pair
      10.  
        Replacing a Replication Gateway from a gateway pair
      11.  
        Removing a Replication Gateway pair
      12.  
        Viewing Replication Gateway pairs
      13.  
        Configuring PXE on Replication Gateway
      14.  
        Configuring the Replication Gateway as a DHCP Server
      15.  
        Unconfiguring PXE boot server from a Replication Gateway
      16.  
        Unconfiguring DHCP server from a Replication Gateway
      17. Managing Data Gateway
        1.  
          Adding a Data Gateway
        2.  
          Removing a Data Gateway
        3.  
          Editing a Data Gateway
    6. Manage enclosure assets
      1.  
        About the discovery host for enclosures
      2. Adding a discovery host
        1.  
          Add Discovery host panel options
      3.  
        Refreshing a discovery host
      4.  
        Removing a discovery host
      5. Configuration prerequisites for adding storage enclosures to an IMS
        1.  
          EMC SRDF Discovery Host prerequisites
        2.  
          NetApp configuration prerequisites
        3.  
          Hitachi TrueCopy/HUR Discovery Host prerequisites
        4.  
          HPE 3PAR configuration prerequisites
        5.  
          IBM SVC configuration prerequisites
        6.  
          IBM XIV configuration prerequisites
      6. Adding storage enclosures
        1.  
          Configure Server panel options
        2.  
          Select Enclosure panel options to enable discovery for selected enclosures
      7. Adding RecoverPoint appliance for replication
        1.  
          Add RecoverPoint panel options for configuration details for RecoverPoint
      8.  
        Editing the discovery configuration for an enclosure
      9.  
        Removing the discovery configuration for an enclosure
      10.  
        Refreshing enclosure discovery information
  5. Section V. Managing networks
    1. Manage networks
      1.  
        Managing network objects
      2. About network objects
        1.  
          About network groups
        2.  
          About Purpose
      3.  
        Adding a subnet
      4.  
        Adding a Hyper-V VLAN
      5.  
        Adding a network group
      6.  
        Editing network objects
      7.  
        Removing network objects
      8.  
        Creating network pairs between source and target data centers
      9.  
        Deleting a network pair
      10.  
        Configuring DNS server settings for a data center
      11.  
        Example of command for Windows keytab file
      12.  
        Network pairs for recovering virtual machines to AWS
      13.  
        Network pairs for recovering virtual machines to Azure
      14.  
        Network pairs for recovering virtual machines to HUAWEI CLOUD
      15.  
        Network pairs for recovering virtual machines to Orange Recovery Engine
      16.  
        Network pairs for recovering virtual machines to OpenStack
      17.  
        Network pairs for recovering virtual machines to vCloud Director
      18.  
        Network pairs for recovering virtual machines to vCloud Director without adding hypervisor server
      19.  
        Network pairs for recovering virtual machines from vCloud Director to vCloud Director
      20.  
        Network pairs for recovering machines to on-premises data center
      21.  
        Network pairs for recovering physical machines to VMware
      22.  
        Network pairs for recovering physical machines to AWS
      23.  
        Network pairs for recovering physical machines to Azure
      24.  
        Network pairs for recovering physical machines to vCloud Director
    2. Manage settings
      1. Managing user authentication and permissions
        1.  
          About user authentication in the web console
        2.  
          About user permissions in the web console
        3.  
          Predefined personas
        4. Configuring authentication domains
          1.  
            Options for authentication domain configuration
        5.  
          Unconfiguring authentication domains
        6.  
          Editing authentication domains
        7.  
          Configuring user groups and users
        8.  
          Assigning permissions to user groups and users
        9.  
          Adding custom personas
        10.  
          Predefined jobs that can be used for custom personas
        11.  
          About limiting object scope for personas
        12.  
          Configuring Windows global user
  6. Section VI. Working with resiliency groups
    1. Organize assets
      1.  
        Viewing your assets
      2.  
        Managing resiliency groups
      3.  
        About resiliency groups with assets
      4.  
        Configuring a resiliency group for basic monitoring
      5.  
        Editing a resiliency group
      6.  
        Deleting a resiliency group
      7.  
        Starting a resiliency group
      8.  
        Stopping a resiliency group
      9.  
        Placing a resiliency group in maintenance mode
      10. Viewing resiliency group details
        1.  
          Viewing resiliency group configuration details
        2.  
          Verifying the replication status for Veritas Resiliency Platform Data Mover
    2. Manage virtual business services
      1.  
        Managing virtual business services
      2.  
        About virtual business services
      3.  
        Creating a virtual business service
      4.  
        Editing a virtual business service
      5.  
        Deleting a virtual business service
      6.  
        Displaying virtual business service details
      7.  
        Starting and stopping a virtual business service
    3. Organize applications
      1.  
        Managing applications using Resiliency Platform
      2.  
        About resiliency groups with applications
      3. Managing custom applications
        1.  
          Prerequisites for managing custom applications
      4.  
        Providing inputs for partially discovered applications
      5.  
        About application bundles
      6.  
        Adding an application bundle to the Resiliency Manager
      7.  
        Installing an application bundle on selected application hosts
      8.  
        Enabling and disabling application bundle on selected application hosts
      9.  
        Managing auto-deploy for an application bundle
      10.  
        Uninstalling an application bundle from selected hosts
      11.  
        Removing an application bundle
      12.  
        Editing the discovery schedule for an application type
      13.  
        Viewing the details of application types
      14.  
        Viewing the applicable host details
      15.  
        About resiliency groups with InfoScale applications
      16.  
        Viewing InfoScale applications details
      17.  
        Managing applications for basic monitoring
    4. Managing service objectives
      1.  
        About service objectives
      2.  
        Viewing or customizing service objectives
      3.  
        Deleting activated service objectives
  7. Section VII. Configuring for disaster recovery
    1. Configure using Resiliency Platform Data Mover
      1.  
        Understanding the role of resiliency groups in disaster recovery operations
      2.  
        About ensuring the disaster recovery readiness of your assets
      3.  
        How Resiliency Platform configures disaster recovery protection for virtual machines
      4.  
        How Resiliency Platform Data Mover handles DR operations
      5.  
        About manual intervention
      6.  
        Limitations for virtual machine disaster recovery
      7. Managing virtual machines for remote recovery (DR) in Amazon Web Services
        1. Prerequisites for configuring VMware virtual machines for recovery to AWS
          1.  
            Example of a policy statement for AWS
          2.  
            Example of trust relationship for AWS
        2.  
          Prerequisites for configuring Hyper-V virtual machines for recovery to AWS
        3.  
          Replication Gateway pair selection options
        4.  
          Volume type selection options
        5.  
          Enable reverse replication option
        6. AWS Customization options panel
          1.  
            Known issues: Recovery from physical environment to virtual machines
        7.  
          Network customization options
        8.  
          Prerequisites for network customization
      8. Managing virtual machines for remote recovery (DR) to Azure
        1.  
          Prerequisites for configuring VMware virtual machines for recovery to Azure
        2.  
          Prerequisites for configuring Hyper-V virtual machines for recovery to Azure
        3.  
          Azure Customization options panel
      9. Managing virtual machines for remote recovery (DR) to OpenStack
        1.  
          Prerequisites for configuring VMware virtual machines for recovery to OpenStack
        2.  
          Prerequisites for configuring Hyper-V virtual machines for recovery to OpenStack
        3.  
          DR configuration options for OpenStack Configurations
      10. Managing virtual machines for remote recovery (DR) to HUAWEI CLOUD
        1.  
          Prerequisites for configuring VMware virtual machines for recovery to HUAWEI CLOUD
        2.  
          HUAWEI CLOUD Customization options panel
      11. Managing virtual machines for remote recovery (DR) to Orange Recovery Engine
        1.  
          Prerequisites for configuring VMware virtual machines for recovery to Orange Recovery Engine
        2.  
          Orange Recovery Engine Customization options panel
      12. Managing virtual machines for remote recovery (DR) in vCloud Director
        1.  
          Prerequisites for configuring VMware virtual machines for recovery to vCloud Director
        2.  
          Prerequisites for configuring Hyper-V virtual machines for recovery to vCloud Director
        3.  
          Prerequisites for configuring virtual machines for recovery from vCloud Director to vCloud Director
      13. Managing virtual machines for remote recovery (DR) using Resiliency Platform Data Mover
        1.  
          Prerequisites for recovering VMware virtual machines using Resiliency Platform Data Mover
        2.  
          Replication Gateway pair selection options for on-premises data center
        3.  
          Target Infrastructure Selection options
      14. Managing physical machines for remote recovery (DR) using Resiliency Platform Data Mover
        1.  
          Prerequisites for recovering physical machines using Resiliency Platform Data Mover
    2. Configure using NetBackup
      1.  
        Prerequisites for configuring VMware virtual machines for recovery using NetBackup images
      2.  
        Support for NetBackup Instant Access to recover a resiliency group
      3.  
        Managing VMware virtual machines for remote recovery using NetBackup images
      4.  
        Managing VMware virtual machines for remote recovery to AWS cloud using NetBackup images
    3. Configure using 3rd party replication technology
      1. Preparing VMware virtual machines for using array-based replication
        1.  
          Configuring VMware virtual machines for disaster recovery using EMC SRDF replication
        2.  
          Configuring VMware virtual machines for disaster recovery using EMC RecoverPoint replication
        3.  
          Configuring VMware virtual machines for disaster recovery using NetApp SnapMirror
        4.  
          Configuring VMware virtual machines for disaster recovery using Hitachi True Copy replication
        5.  
          Configuring VMware virtual machines for disaster recovery using HPE 3PAR Remote Copy replication
        6.  
          Configuring VMware virtual machines for disaster recovery using IBM SVC Global Mirror replication
        7.  
          Configuring VMware virtual machines for disaster recovery using IBM XIV Remote Mirror replication
      2. Preparing Hyper-V virtual machines for using array-based replication
        1.  
          Configuring Hyper-V virtual machines for disaster recovery using Hyper-V Replica
        2.  
          Configuring Hyper-V virtual machines for disaster recovery using EMC RecoverPoint
        3.  
          Configuring Hyper-V virtual machines for disaster recovery using EMC SRDF
        4.  
          Configuring Hyper-V virtual machines for disaster recovery using Hitachi TrueCopy Universal Replicator
        5.  
          Configuring Hyper-V virtual machines for disaster recovery using HPE 3PAR Remote Copy
        6.  
          Configuring Hyper-V virtual machines for disaster recovery using IBM SVC Global Mirror
        7.  
          Configuring Hyper-V virtual machines for disaster recovery using IBM XIV Remote Mirror
      3. Managing virtual machines for remote recovery (DR) using 3rd party replication technology
        1.  
          Prerequisites for configuring VMware virtual machines for recovery using 3rd party replication technology
        2.  
          Prerequisites for configuring Hyper-V virtual machines for recovery using 3rd party replication technology
      4. Managing applications for remote recovery (DR)
        1.  
          Prerequisites for configuring applications for disaster recovery
        2.  
          Prerequisites for configuring InfoScale applications for disaster recovery
        3.  
          Configuring applications for disaster recovery using EMC SRDF replication
        4.  
          Configuring applications for disaster recovery using EMC RecoverPoint replication
        5.  
          Configuring applications for disaster recovery using NetApp SnapMirror replication
  8. Section VIII. Managing disaster recovery
    1. Perform DR operations for virtual machines
      1.  
        About Rehearse operation
      2.  
        Rehearse operations for VMware virtual machines - array-based replication
      3.  
        Rehearse operations for Hyper-V virtual machines - array-based replication
      4. Performing the rehearsal operation for virtual machines
        1.  
          Prerequisites for rehearsal operation for virtual machines
      5.  
        Performing cleanup rehearsal for virtual machines
      6.  
        Migrating a resiliency group
      7.  
        Taking over a resiliency group of virtual machines
      8.  
        Performing the resync operation for virtual machines
      9.  
        Performing the rehearsal operation using NetBackup images
      10.  
        Performing the rehearsal operation on virtual machines from VMware to AWS using NetBackup Automated DR
      11.  
        Restoring data using NetBackup to on-premises data center
      12.  
        Restoring virtual machines to cloud (AWS) using NetBackup Automated DR
      13.  
        Clearing outage
    2. Perform DR operations on a VBS
      1.  
        Performing rehearsal on a virtual business service
      2.  
        Performing cleanup rehearsal on a virtual business service
      3.  
        Migrating a virtual business service
      4.  
        Taking over a virtual business service
      5.  
        Performing resync for a virtual business service
      6.  
        Performing restore for a virtual business service
    3. Perform DR operations for applications
      1.  
        Rehearse operations for applications - array-based replication
      2.  
        Performing the rehearsal operation for applications
      3.  
        Performing cleanup rehearsal for applications
      4.  
        Migrating a resiliency group of applications
      5.  
        Taking over a resiliency group of applications
      6.  
        Performing the resync operation for applications
    4. Evacuate assets
      1.  
        About evacuation plan
      2.  
        Generating an evacuation plan
      3.  
        Regenerating an evacuation plan
      4.  
        Performing rehearse evacuation
      5.  
        Performing cleanup evacuation rehearsal
      6.  
        Performing evacuation
    5. Manage Resiliency Plans
      1.  
        Managing resiliency plans
      2.  
        About resiliency plans
      3.  
        Creating a new resiliency plan template
      4.  
        Editing a resiliency plan template
      5.  
        Deleting a resiliency plan template
      6.  
        Viewing a resiliency plan template
      7.  
        Creating a new resiliency plan
      8.  
        Editing a resiliency plan
      9.  
        Deleting a resiliency plan
      10.  
        Executing a resiliency plan
      11.  
        Viewing a resiliency plan
      12.  
        Creating a schedule for a resiliency plan
      13.  
        Editing a schedule for a resiliency plan
      14.  
        Deleting a schedule for a resiliency plan
      15.  
        Viewing a schedule for a resiliency plan
      16.  
        About manual task
      17.  
        Using manual tasks in resiliency plans
      18. About custom script
        1.  
          Using custom scripts in resiliency plans
  9. Section IX. Product settings
    1. View activities
      1.  
        Managing activities
      2.  
        Viewing activities
      3.  
        Managing a running activity
    2. Manage reports
      1.  
        Managing reports
      2.  
        About reports
      3.  
        Managing report preferences
      4.  
        Scheduling a report
      5.  
        Running a report
      6.  
        Viewing reports
      7.  
        Viewing and managing report schedules
    3. View logs
      1.  
        Viewing events and logs in the console
      2.  
        Events in Hyper-V virtual machines disaster discovery
      3.  
        Events in VMware virtual machines disaster discovery
      4.  
        Log files to troubleshoot Veritas Resiliency Platform Data Mover
      5. Gather support logs from Resiliency Platform user interface
        1.  
          Viewing support logs
        2.  
          Collecting support logs
        3.  
          Downloading support logs
        4.  
          Deleting support logs
        5.  
          Required permissions for support logs
    4. Manage Risk Notifications
      1.  
        About risks
      2.  
        Managing risks
      3.  
        Displaying risk information
      4. Predefined risks in Resiliency Platform
        1.  
          Admin Wait state codes
      5.  
        Viewing the current risk report
      6.  
        Viewing the historical risk report
    5. Managing settings for alerts and notifications and miscellaneous product settings
      1.  
        Adding, modifying, or deleting email settings
      2.  
        Adding, modifying, or deleting SNMP settings
      3.  
        Downloading the MIB file
      4.  
        Setting up rules for event notifications
      5.  
        Adding, modifying, or removing Syslog server
      6.  
        Modifying the purge setting for logs and SNMP traps
      7.  
        Modifying the purge setting for reports
      8.  
        Modifying the purge setting for activities
      9.  
        Enabling or disabling telemetry collection
      10.  
        Showing domains on login screen
  10. Section X. Using Resiliency Platform APIs
    1. Using Resiliency Platform APIs
      1. Security and user model
        1.  
          Accessing APIs
        2.  
          API access key
        3.  
          API user permissions
      2.  
        Versioning
      3.  
        API specifications
      4. Accessing the API browser
        1.  
          Invoking API from the API browser
      5. Examples of running the Resiliency Platform APIs using the cURL syntax
        1.  
          Running the Resiliency Platform APIs
    2. List of Resiliency Platform APIs
      1.  
        Monitoring APIs
  11. Section XI. Troubleshooting and Using command line interface
    1. Troubleshoot
      1. Recovery of Resiliency Platform components from disaster scenarios
        1.  
          Recovering Resiliency Manager
        2. Recovering IMS
          1.  
            Steps to recover an IMS
        3.  
          Recovering Replication Gateway
      2.  
        Troubleshooting: NetBackup issues
      3.  
        Troubleshooting: Removing a Resiliency Manager from a resiliency domain
      4. Resolving the Admin Wait state
        1.  
          Admin Wait state codes
      5.  
        Troubleshooting: Delete resiliency group operation
      6.  
        Troubleshooting: Deployment of virtual appliances in Azure
      7.  
        Troubleshooting: Copy file into the virtual appliance
      8.  
        Troubleshooting: Copy file from the virtual appliance
      9.  
        Manually cleaning up virtual machines
      10.  
        Troubleshooting: IP customization
      11.  
        Configure DR operation fails with an integration services error
      12.  
        Resiliency Platform fails to attach storage policy to virtual machines
      13.  
        Resiliency Platform fails to create storage policy
      14.  
        Troubleshooting: Discovery of assets
      15.  
        Troubleshooting: Hosts not added to IMS after migration to cloud data center
      16.  
        Troubleshooting: Connection between Resiliency Managers in a resiliency domain
      17.  
        Troubleshooting: DR operation failure with error message cannot change host configuration at VMware detach disk(s) subtask
      18.  
        Troubleshooting: If datastores are renamed
      19.  
        Troubleshooting: Migrate operation
      20.  
        Troubleshooting: Takeover operation
      21.  
        Troubleshooting: Failure to add IMS
      22.  
        Troubleshooting: Replace Replication Gateway operation
      23.  
        Troubleshooting: klish commands for Resiliency Manager, IMS, or Replication Gateway
      24.  
        Troubleshooting: In Hyper-V guest environment writeable disk is shown as Read-only
      25.  
        Troubleshooting: Steps to manually remove addon from hosts managed under Resiliency Platform
    2. Use klish menu
      1.  
        About klish
      2.  
        Klish menu options for Resiliency Manager
      3.  
        Klish menu options for IMS
      4.  
        Klish menu options for Replication Gateway
      5.  
        Klish menu options for YUM server
    3. Use Application Enablement SDK
      1.  
        Introduction to Application Enablement SDK
      2.  
        About Perl APIs
      3. Using Perl APIs
        1.  
          Define an application
        2.  
          Logging
        3.  
          Application objects
        4.  
          Application inputs
        5.  
          Application properties
        6.  
          Finish
      4.  
        Managing clustered applications
      5.  
        Unit testing of your application module script
      6.  
        Testing a script using CLI
      7.  
        Sample script
      8.  
        Sample script output
      9.  
        About the manifest file
  12.  
    Glossary

Configuring network settings for IMS

An IMS needs to communicate with multiple entities with in Veritas Resiliency Platform such as the Resiliency Manager and the protected hosts. To facilitate separate communication channels for these communications, Resiliency Platform 3.4 extends support for configuring IMS with two Network Interface Cards (NIC).

The IMS appliance is shipped with three NICs. You can configure these NICs to be used for the following two communications:

  • For communication with Resiliency Manager

  • For communication with the gateways as well as with the hosts to be protected

Remaining one NIC is not configured during the bootstrap. Using the klish menu, you can configure that NIC later for communication between the appliance and any external entity. You can now configure this remaining NIC using IPv6 address with nic-configuration set command.

See Klish menu options for IMS.

If you do not plan to use two separate networks, you do not need to configure the two NICs. You can configure only one NIC or two NICs based on your network layout. So if you have only one network, you can configure only one NIC and associate the two communications to go through the configured NIC.

Since IPv6 network support is provided from Resiliency Platform 3.3.1 version, you can configure the NICs using IPv4 and IPv6 addresses. For more information, See About IPv6 network support in Resiliency Platform.

Note:

The network configuration of the NICs performed during the bootstrap is final and you cannot edit the network configuration of the NICs at a later point of time.

To configure network settings for IMS

  1. In the Host Network Settings section, the bootstrap program first checks for network configuration of all the NICs of the appliance and prints the network details of all the NICs. You are prompted to continue the process of bootstrap. You can see a list of sections that need to be completed as a part of host network settings:

    • Host Network Settings for communication with Resiliency Manager

    • Host Network Settings for communication with Replication Gateway, Workload Virtual Machines, And Discovery Hosts

  2. For each section listed above, do the following:

    • Enter the NIC to be used for the communication. The name and MAC address of NIC is displayed.

    • The Bootstrap process checks if the NIC is already configured.

      • If the NIC is already configured then the NIC network configuration details are printed and you are prompted to confirm if you want to continue with the printed configuration.

      • If the NIC is not configured or if you do not want to use the existing NIC configuration, then you can choose to use either DHCP protocol or static protocol. In case of static protocol, you need to provide static network details such as IP address, prefix length.

        Note:

        Ensure that appropriate subnet or virtual switch is assigned to the network adapter. Confirm this by matching the MAC address shown in the bootstrap with the one assigned to the virtual machine by the virtualization technology or cloud technology.

      • Confirm if you want to add a static route. You need to set a static route for the interface only If you want the interface to reach a subnet that is different from all the subnets configured on this appliance and the default gateway is unable to communicate with that subnet. In this case, provide the subnet details (in CIDR format) at the input prompt. You can also set a static route to a host. In this case, provide the IP address of the host at the input prompt.

    • Confirm if you are in Network Address Translation (NAT) environment and want to configure NAT when the NICs are configured in IPv4 networks only.

      Note:

      Since NAT is not supported for IPv6 address, hence when you configure the virtual appliance using IPv6 address only and both IPv4 and IPv6 address, you are not asked about the NAT configuration. To know more about NAT support in Resiliency Platform

      See About NAT support in Veritas Resiliency Platform. See About IPv6 network support in Resiliency Platform.

      You can add NAT gateway for communication between Resiliency Manager and IMS, only if IMS and the Resiliency Manager are not deployed in the same data center.

  3. After successful configuration of the first NIC, confirm if you want to use the same NIC for the other communication channel. If you do not want to use the same NIC, perform step 2 for the other NIC.
  4. Enter details for default router and then enter the DNS server details.
  5. The details of Host Network Settings are displayed and you are prompted to confirm. Review the information. If any information is incorrect, choose n to go back to the networking inputs page and correct the details. Upon confirmation, the network is configured.

More Information

Configuring the Resiliency Manager or IMS