Veritas NetBackup™ Appliance Fibre Channel Guide
- About NetBackup Fibre Transport and SAN Client
- About optimized duplication and Auto Image Replication over FC
- About backup to tape support
- VMware support
- Supported Fibre Channel features on NetBackup appliances
- NetBackup Appliance rear panel configurations
- About the HBA port mode configuration
- Supported Fibre Channel port configurations for the NetBackup 5220 and 5230 appliances
- Supported Fibre Channel port configuration for the NetBackup 5240 appliances
- Supported Fibre Channel port configurations for the NetBackup 53xx appliances
- About the factory default port mode configuration
- Default port mode configuration for FTMS, optimized duplication, and Auto Image Replication
- Zoning the FC SAN
- About the Fibre Transport page on the NetBackup Appliance Web Console
- Configuring Fibre Transport on the appliance
- How to configure Fibre Transport media server for SAN Client
- Guidelines for changing NetBackup appliance FT target ports to receive data streams from multiple SAN Client FC initiator ports
- How to configure Fibre Transport for optimized duplication and Auto Image Replication over FC
- Configuring Fibre Transport to other NetBackup appliances
- Configuring Fibre Transport on a target appliance for optimized duplication and replication
- About Fibre Transport Deduplication target mode port verification
- How to configure two NetBackup 52xx or 53xx appliances in different domains for MSDP replication
About backup to tape support for NetBackup appliances
NetBackup appliances support backups to tape so that you can connect one or more tape libraries to them with Fibre Channel. The appliances use a Fibre Channel host bus adapter card (FC HBA) for connection to a TLD tape storage device.
If you use a tape library as storage, create a separate zone for that traffic. The tape storage zone should include the following FC HBA ports:
A port or ports on the FC HBA card(s) of the appliance.
A port or ports on the tape library.
See the following for how tape out is supported on FC HBA cards on each appliance hardware model.
See Supported Fibre Channel port configurations for the NetBackup 5220 and 5230 appliances.
See Supported Fibre Channel port configuration for the NetBackup 5240 appliances.
See Supported Fibre Channel port configurations for the NetBackup 53xx appliances.
For hardware compatibility list (HCL) for tape drives and tape libraries on the appliance, check the NetBackup hardware compatibility at the following link: