Storage Foundation 7.4.1 Administrator's Guide - Solaris

To encapsulate a disk for use in VxVM

1. Select Encapsulate one or more disks from the vxdiskadm main menu.

   Your system may use device names that differ from the examples shown here.

   At the following prompt, enter the disk device name for the disks to be encapsulated:

   Select disk devices to encapsulate: 
   [<pattern-list>,all,list,q,?] device name

   The pattern-list can be a single disk, or a series of disks and/or controllers (with optional targets). If pattern-list consists of multiple items, those items must be separated by white space.

   If you do not know the address (device name) of the disk to be encapsulated, enter l or list at the prompt for a complete listing of available disks.

2. To continue the operation, enter y (or press Return) at the following prompt:

   Here is the disk selected. Output format: [Device]
   device name
     
   Continue operation? [y,n,q,?] (default: y) y

3. Select the disk group to which the disk is to be added at the following prompt:

   You can choose to add this disk to an existing disk group or to 
   a new disk group. To create a new disk group, select a disk 
   group name that does not yet exist.
    
   Which disk group [<group>,list,q,?]

4. At the following prompt, either press Return to accept the default disk name or enter a disk name:

   Use a default disk name for the disk? [y,n,q,?] (default: y)

5. To continue with the operation, enter y (or press Return) at the following prompt:

   The selected disks will be encapsulated and added to the 
   disk group name disk group with default disk names.
   
   device name
   
   Continue with operation? [y,n,q,?] (default: y) y
   

6. To confirm that encapsulation should proceed, enter y (or press Return) at the following prompt:

   The following disk has been selected for encapsulation.
    Output format: [Device]
   
   device name
   
   Continue with encapsulation? [y,n,q,?] (default: y) y

   A message similar to the following confirms that the disk is being encapsulated for use in VxVM:

   The disk device device name will be encapsulated and added to
   the disk group diskgroup with the disk name diskgroup01.

7. For non-root disks, you can now choose whether the disk is to be formatted as a CDS disk that is portable between different operating systems, or as a non-portable sliced disk:

   Enter the desired format [cdsdisk,sliced,q,?]
   (default: cdsdisk)

   Enter the format that is appropriate for your needs. In most cases, this is the default format, cdsdisk. Note that only the sliced format is suitable for use with root, boot or swap disks.

8. At the following prompt, vxdiskadm asks if you want to use the default private region size of 65536 blocks (32MB). Press Return to confirm that you want to use the default value, or enter a different value. (The maximum value that you can specify is 524288 blocks.)

   Enter desired private region length [<privlen>,q,?]
   (default: 65536)

9. If you entered cdsdisk as the format in step 7, you are prompted for the action to be taken if the disk cannot be converted this format:

   Do you want to use sliced as the format should cdsdisk
   fail? [y,n,q,?] (default: y)

   If you enter y, and it is not possible to encapsulate the disk as a CDS disk, it is encapsulated as a sliced disk. Otherwise, the encapsulation fails.

10. vxdiskadm then proceeds to encapsulate the disks. You should now reboot your system at the earliest possible opportunity, for example by running this command:

    # shutdown -g0 -y -i6

    The /etc/vfstab file is updated to include the volume devices that are used to mount any encapsulated file systems. You may need to update any other references in backup scripts, databases, or manually created swap devices. The original /etc/vfstab file is saved as /etc/vfstab.prevm.

11. At the following prompt, indicate whether you want to encapsulate more disks (y) or return to the vxdiskadm main menu (n):

    Encapsulate other disks? [y,n,q,?] (default: n) n

    The default layout that is used to encapsulate disks can be changed.