Storage Foundation for Oracle® RAC 8.0.2 Administrator's Guide - Solaris

To configure the VxFEN parameters and reconfigure the VxFEN module

1. Edit the file /kernel/drv/vxfen.conf to change the vxfen_min_delay value to 30.

   The following VXFEN example displays the content of the default file /kernel/drv/vxfen.conf before changing the vxfen_min_delay parameter:

   #
   # VXFEN configuration file
   #
   name="vxfen" parent="pseudo" instance=0 dbg_log_size=65536 
   vxfen_max_delay=60 vxfen_min_delay=1;

   After editing the file to change the vxfen_min_delay value to 30, the default file /kernel/drv/vxfen.conf contains the following values:.

   #
   # VXFEN configuration file
   #
   name="vxfen" parent="pseudo" instance=0 dbg_log_size=65536 
   vxfen_max_delay=60 vxfen_min_delay=30;

   After reviewing the edits that you made to the default file, close and save the file.

2. Shut down all Oracle service groups on the node:

   # hagrp -offline oragrp -sys  sys1

3. Stop all Oracle client processes, such as sqlplus, svrmgrl, and gsd, on the node.

4. Stop VCS and CVM.

   # hastop -local

5. Unconfigure the VXFEN module:

   # vxfenconfig -U

6. Determine the VXFEN module ID:

   # /usr/sbin/modinfo | grep -i vxfen

   The module ID is the number in the first column of the output.

7. Unload the VXFEN module, using the module ID you determined:

   # /usr/sbin/modunload -i module_ID

8. Run the update_drv command to re-read the /kernel/drv/vxfen.conf file.

   # /usr/sbin/update_drv vxfen

   Note:

   The modunload command has often been used on driver modules to force the system to reread the associated driver configuration file. While this procedure and command works in Solaris 9, this behavior may fail in later releases. The supported method for rereading the driver configuration file for systems running Solaris 11 or later is through the update_drv command. For additional information, refer to update_drv(1M).

9. Configure the VXFEN module:

   # vxfenconfig -c

10. Start VCS.

    # hastart

11. Bring the service groups back online:

    # hagrp -online oragrp -sys sys1