Veritas NetBackup™ Appliance Administrator's Guide

To tag VLAN

1. Log on to the NetBackup Appliance Web Console.
2. Click Settings > Network tab. The appliance displays the default Network Settings page.
3. In the Network Configuration section, expand the Tag VLAN option and enter the network information that is required to tag a VLAN using the following fields:

   Field Name	Description
   Select Interface	Select the network interface or the device name to which you want to tag the VLAN. See Network and VLAN configuration guidelines. for additional guidelines on tagging a VLAN.
   Description	Enter a description for the VLAN. For example, Finance or Human Resource.
   VLAN Id	Enter a numeric identifier for the VLAN. For example, 1 or 10.
   IP Address [IPv4 or IPv6]	Enter the IPv4 or the IPv6 address to be used for this appliance.
   Subnet Mask	Enter the subnet mask value that corresponds to the IP address.

4. Click Add to add the configuration information for tagging VLAN into to your existing network environment.
5. To enter information for tagging additional VLANs, click the + sign to add a row. To remove any of the rows, click the - sign that is adjacent to the Subnet Mask field.