Veritas NetBackup™ Appliance Commands Reference Guide

DESCRIPTION

The NetBackup Appliance uses the SNMPv2-SMI application protocol to monitor the appliance. Use this command to add or change SNMP parameters on the server. You can use the following commands to display the current parameters and the changes that were made to the SNMP information. You can use this command to enable and disable SNMP notifications for appliance monitoring.

When you create and enable an SNMP community you enable appliance monitoring to occur on the appliance through the SNMP protocol. Notifications or traps are programmed to occur on the appliance. In addition, you can use this command to see the notification traps that have been configured for the appliance.

OPTIONS

EXAMPLES

You can use either of the following methods to configure a public SNMP community on port 8080. The example uses the [Community] and [Port] options.

abc123.Alerts> SNMP Set pqr222.xyz.com public 8080
Successfully set SNMP manager

When you run the Settings> Alerts > SNMP ShowMIB command, an output similar to the following is displayed.

VERITAS-APPLIANCE-MONITORING-MIB DEFINITIONS ::= BEGIN
	 
	  IMPORTS 
	    DisplayString, mib-2 FROM RFC1213-MIB
	    enterprises, OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI;
	 
	  
	  applianceMonitoringMib MODULE-IDENTITY
	  LAST-UPDATED "2016083000Z"
	  ORGANIZATION "Veritas Technologies LLC"
	  CONTACT-INFO "500 East Middlefield Road
	                Mountain View, CA 94043 US
	                Subject: appliance.mib"
	  DESCRIPTION  "The MIB module for Veritas Appliance Monitoring"
	 
 	 REVISION     "201609060000Z"
 	 DESCRIPTION  "Changed symc strings to vrts."
	 
	  ::= { products 9 }
	  
	  veritassoftware          OBJECT IDENTIFIER ::= { enterprises 48328 }
	  products                  OBJECT IDENTIFIER ::= { veritassoftware 3 }
	 
	  systems                   OBJECT IDENTIFIER ::= { applianceMonitoringMib 1 }
	  software                  OBJECT IDENTIFIER ::= { applianceMonitoringMib 2 }
	  
	-- system traps 
	 
	  vrtssystemName OBJECT-TYPE
	    SYNTAX DisplayString (SIZE(0..80))
	    MAX-ACCESS read-only
	    STATUS current 
	    DESCRIPTION "System Name"
	  ::= { systems 1 }
	 
	  vrtsfanTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps fan failures"
	  ::= { systems 3 }
	 
	  vrtspowerTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps power failures"
	  ::= { systems 4 }
	 
	  vrtsfibrechannelTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps FibreChannel failures"
	  ::= { systems 5 }
	 
	  vrtstemperatureTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps temperature failures"
	  ::= { systems 6 }
	 
	  vrtscpuTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps cpu failures"
	  ::= { systems 7 }
	 
	  vrtsdiskTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps disk failures"
	  ::= { systems 8 }
	 
	  vrtsraidgroupTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps raid failures"
	  ::= { systems 9 }
	 
	 
	  vrtsenclosurefanTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps enclosure fan failures"
	  ::= { systems 10 }
	 
	  vrtsenclosurepowerTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps enclosure power failures"
	  ::= { systems 11 }
	 
	  vrtsenclosuretemperatureTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps enclosure temperature failures"
	  ::= { systems 12 }
	 
	  vrtsenclosurediskTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps enclosure disk failures"
	  ::= { systems 13 }
	 
	  vrtsadapterTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps adapter failures"
	  ::= { systems 14 }
	 
	  vrtsfirmwareTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps firmware failures"
	  ::= { systems 15 }
	  
	  vrtspciTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps pci failures"
	  ::= { systems 16 }
	  
	  vrtsnetworkcardTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps network card failures"
	  ::= { systems 17 }
	 
	  vrtsvolumeTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps volume failures"
	  ::= { systems 18 }
	 
	  vrtsbbuTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps BBU failures"
	  ::= { systems 19 }
	  
	  vrtsconnectionTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps connection failures"
	  ::= { systems 20 }
	 
	  vrtspartitionTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Partition alert traps"
	  ::= { systems 21 }
	 
	  vrtsstoragestatusTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps StorageArray HealthStatus failures"
	  ::= { systems 22 }
	  
	  vrtsdimmTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Traps Dimm failures"
	  ::= { systems 23 }
	 
	-- software traps
	 
	  vrtsfailedJobsTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Job failures Trap"
	  ::= { software 1 }
	 
	  vrtsprocessTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Processes stopped traps"
	  ::= { software 2 }
	 
	  vrtsdiskSpaceTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Low disk space traps"
	  ::= { software 3 }
	  
	  vrtssoftwareUpdateSuccessTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Software update success trap"
	  ::= { software 4 }
	  
	  vrtssoftwareUpdateFailedRollbackSuccessTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Software update failed but rollback was successful trap"
	  ::= { software 5 }
	  
	  vrtssoftwareUpdateFailedRollbackFailedTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Software update and rollback failed trap"
	  ::= { software 6 }
	  
	  vrtsrollbackSuccessTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Software rollback success trap"
	  ::= { software 7 }
	  
	  vrtsrollbackFailedTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Software rollback failed trap"
	  ::= { software 8 }
	  
	  vrtsclusterStateTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Cluster node failed trap"
	  ::= { software 9 }
	  
	  vrtsdiskPerfTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Disk performance alert trap"
	  ::= { software 10 }
	  
	  vrtscollectorserviceTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
	    DESCRIPTION "Collector plugin loading failed trap"
	  ::= { software 11 }
	  
	  vrtshaclusternameTrap NOTIFICATION-TYPE
	    OBJECTS { vrtssystemName }
	    STATUS current
 	    DESCRIPTION "HA cluster name trap"
	  ::= { software 12 }
	  
	END