Veritas NetBackup™ Commands Reference Guide

Last Published:
Product(s): NetBackup (8.1.1)
  1. Introduction
    1.  
      About NetBackup commands
    2.  
      Navigating multiple menu levels
    3.  
      NetBackup command conventions
    4.  
      NetBackup Media Manager command notes
    5.  
      IPV6 updates
  2. Appendix A. NetBackup Commands
    1.  
      acsd
    2.  
      add_media_server_on_clients
    3.  
      backupdbtrace
    4.  
      backuptrace
    5.  
      bmrc
    6.  
      bmrconfig
    7.  
      bmrepadm
    8.  
      bmrprep
    9.  
      bmrs
    10.  
      bmrsrtadm
    11.  
      bp
    12.  
      bparchive
    13.  
      bpbackup
    14.  
      bpbackupdb
    15.  
      bpcatarc
    16.  
      bpcatlist
    17.  
      bpcatres
    18.  
      bpcatrm
    19.  
      bpcd
    20.  
      bpchangeprimary
    21.  
      bpclient
    22.  
      bpclimagelist
    23.  
      bpclntcmd
    24.  
      bpclusterutil
    25.  
      bpcompatd
    26.  
      bpconfig
    27.  
      bpdbjobs
    28.  
      bpdbm
    29.  
      bpdgclone
    30.  
      bpdown
    31.  
      bpduplicate
    32.  
      bperror
    33.  
      bpexpdate
    34.  
      bpfis
    35.  
      bpflist
    36.  
      bpgetconfig
    37.  
      bpgetdebuglog
    38.  
      bpimage
    39.  
      bpimagelist
    40.  
      bpimmedia
    41.  
      bpimport
    42.  
      bpinst
    43.  
      bpkeyfile
    44.  
      bpkeyutil
    45.  
      bplabel
    46.  
      bplist
    47.  
      bpmedia
    48.  
      bpmedialist
    49.  
      bpminlicense
    50.  
      bpnbat
    51.  
      bpnbaz
    52.  
      bppficorr
    53.  
      bpplcatdrinfo
    54.  
      bpplclients
    55.  
      bppldelete
    56.  
      bpplinclude
    57.  
      bpplinfo
    58.  
      bppllist
    59.  
      bpplsched
    60.  
      bpplschedrep
    61.  
      bppolicynew
    62.  
      bpps
    63.  
      bprd
    64.  
      bprecover
    65.  
      bprestore
    66.  
      bpretlevel
    67.  
      bpschedule
    68.  
      bpschedulerep
    69.  
      bpsetconfig
    70.  
      bpstsinfo
    71.  
      bpstuadd
    72.  
      bpstudel
    73.  
      bpstulist
    74.  
      bpsturep
    75.  
      bptestbpcd
    76.  
      bptestnetconn
    77.  
      bptpcinfo
    78.  
      bpup
    79.  
      bpverify
    80.  
      cat_convert
    81.  
      cat_export
    82.  
      cat_import
    83.  
      configurePorts
    84.  
      create_nbdb
    85.  
      csconfig cldinstance
    86.  
      csconfig cldprovider
    87.  
      csconfig meter
    88.  
      csconfig throttle
    89.  
      duplicatetrace
    90.  
      importtrace
    91.  
      jbpSA
    92.  
      jnbSA
    93.  
      ltid
    94.  
      manageClientCerts
    95.  
      mklogdir
    96.  
      nbauditreport
    97.  
      nbcatsync
    98.  
      NBCC
    99.  
      NBCCR
    100.  
      nbcertcmd
    101.  
      nbcertupdater
    102.  
      nbcldutil
    103.  
      nbcomponentupdate
    104.  
      nbcplogs
    105.  
      nbdb_admin
    106.  
      nbdb_backup
    107.  
      nbdb_move
    108.  
      nbdb_ping
    109.  
      nbdb_restore
    110.  
      nbdb_unload
    111.  
      nbdbms_start_server
    112.  
      nbdbms_start_stop
    113.  
      nbdc
    114.  
      nbdecommission
    115.  
      nbdelete
    116.  
      nbdeployutil
    117.  
      nbdevconfig
    118.  
      nbdevquery
    119.  
      nbdiscover
    120.  
      nbdna
    121.  
      nbemm
    122.  
      nbemmcmd
    123.  
      nbexecute
    124.  
      nbfindfile
    125.  
      nbfirescan
    126.  
      nbftadm
    127.  
      nbftconfig
    128.  
      nbgetconfig
    129.  
      nbhba
    130.  
      nbholdutil
    131.  
      nbhostidentity
    132.  
      nbhostmgmt
    133.  
      nbhypervtool
    134.  
      nbjm
    135.  
      nbkmsutil
    136.  
      nboraadm
    137.  
      nborair
    138.  
      nbpem
    139.  
      nbpemreq
    140.  
      nbperfchk
    141.  
      nbplupgrade
    142.  
      nbrb
    143.  
      nbrbutil
    144.  
      nbregopsc
    145.  
      nbreplicate
    146.  
      nbrestorevm
    147.  
      nbseccmd
    148.  
      nbsetconfig
    149.  
      nbsnapimport
    150.  
      nbsnapreplicate
    151.  
      nbsqladm
    152.  
      nbstl
    153.  
      nbstlutil
    154.  
      nbstop
    155.  
      nbsu
    156.  
      nbsvrgrp
    157.  
      resilient_clients
    158.  
      restoretrace
    159.  
      stopltid
    160.  
      tl4d
    161.  
      tl8d
    162.  
      tl8cd
    163.  
      tldd
    164.  
      tldcd
    165.  
      tlhd
    166.  
      tlhcd
    167.  
      tlmd
    168.  
      tpautoconf
    169.  
      tpclean
    170.  
      tpconfig
    171.  
      tpext
    172.  
      tpreq
    173.  
      tpunmount
    174.  
      verifytrace
    175.  
      vltadm
    176.  
      vltcontainers
    177.  
      vlteject
    178.  
      vltinject
    179.  
      vltoffsitemedia
    180.  
      vltopmenu
    181.  
      vltrun
    182.  
      vmadd
    183.  
      vmchange
    184.  
      vmcheckxxx
    185.  
      vmd
    186.  
      vmdelete
    187.  
      vmoprcmd
    188.  
      vmphyinv
    189.  
      vmpool
    190.  
      vmquery
    191.  
      vmrule
    192.  
      vmupdate
    193.  
      vnetd
    194.  
      vwcp_manage
    195.  
      vxlogcfg
    196.  
      vxlogmgr
    197.  
      vxlogview
    198.  
      W2KOption

Name

vmoprcmd — perform operator functions on drives

SYNOPSIS

vmoprcmd -devmon [pr | ds | hs] [-h device_host] default_operation

vmoprcmd -dp [pr | ds | ad] [-h device_host]

vmoprcmd -down | -up | -upopr | -reset drive_index [-h device_host]

vmoprcmd -downbyname | -upbyname | -upoprbyname | -path drive_path] [-nh ndmp_hostname] [-h device_host]

vmoprcmd -resetbyname drive_name [-h device_host]

vmoprcmd -assign drive_index mount_request_id [-h device_host]

vmoprcmd -assignbyname drive_name mount_request_id [-h device_host]

vmoprcmd -deny | -resubmit mount_request_index [-h device_host]

vmoprcmd -comment drive_index ["comment"] [-h device_host]

vmoprcmd -commentbyname drive_name ["comment"] [-h device_host]

vmoprcmd -crawlreleasebyname drive_name [-h EMM_Server]

vmoprcmd [-activate_host | -deactivate_host] [-h device_host]

vmoprcmd -hoststatus [-h device_host]

On UNIX systems, the directory path to this command is /usr/openv/volmgr/bin/

On Windows systems, the directory path to this command is install_path\Volmgr\bin\

DESCRIPTION

This command lets you perform operator functions on drives. The -h option is not required, but you must choose only one of the following other options.

Non NDMP Windows device paths appear as {p,b,t,l}: where p is the port, b is the bus, t is the target, and l is the LUN. When vmoprcmd is run by using the -path argument, specify the path in the {p,b,t,l} format.

Any authorized user can run this command.

For more information about NetBackup authorization, refer to the NetBackup Security and Encryption Guide.

OPTIONS

-assign drive_index mount_request_id

Assign a drive to a mount request.

-assignbyname drive_name mount_request_id

This option is similar to the -assign option, except the drive name specifies the drive instead of the drive index.

The following point applies only to NetBackup server:

The device host is the host where Media Manager is installed.

-comment drive_index ["comment"]

Add a comment for the drive. The quotes are required if your comment contains any spaces. If you do not specify comment, any existing comments for the drive are deleted.

-commentbyname drive_name ["comment"]

This option is similar to the -comment option, except the drive name specified the drive instead of drive index.

-crawlreleasebyname drive_name

This option is only applicable for NetBackup Enterprise Server.

This option forces all hosts (that are registered to use the drive) to issue a SCSI release command to the drive. Issue this option on the host that is the SSO device allocator (DA host) or use the -h option to specify the DA host.

Caution:

Use this option after a PEND status has been seen in Device Monitor. Do not use this option during backups.

-down | -up | -upopr | -reset drive_index

-down Sets the drive to the DOWN state, if it is not assigned.

-up Sets the drive to the UP position in Automatic Volume Recognition (AVR) mode. This mode is the normal mode for all drives.

-upopr Sets the drive to the UP position in Operator (OPR) mode. This mode is normally used only for security reasons. For a drive in a robot, OPR and AVR are treated identically while the robot daemon or process is running.

-reset Resets the specified drive. Also, it unloads the drive (if not assigned in the EMM database). You can use the unload capability to unload the media that is stuck in the drive.

-downbyname | -upbyname | -upoprbyname | -resetbyname drive_name

These options are similar to -down, -up, -upopr, and -reset respectively, except the drive name specifies the drive instead of the drive index.

-deny | -resubmit mount_request_id

-deny Denying a mount request returns an error message to the user.

-resubmit Resubmit a mount request. If a pending action message involves a robot, you must correct the problem and resubmit the request that caused the message.

-dp [pr | ds | ad]

If none of the following optional display parameters are specified, all information is displayed.

pr - Displays any pending requests.

ds - Displays the status of drives under control of Media Manager.

ad - Displays additional status of drives under control of Media Manager.

-devmon [pr | ds | hs] default_operation

The -dp command lists all of the drive paths that are configured for a given drive name. If none of the following optional display parameters are specified, all information is displayed.

pr Displays any pending requests.

ds Displays the status of drives under control of Media Manager.

hs Displays additional status of drives under control of Media Manager.

-h EMM_Server | device host

Name of the Enterprise Media Manager database host where the drives are attached and configured. If no host option is specified, the device host where you run the command is default.

The device host is the host where the device is attached and configured.

-hoststatus

Displays the current status of the host. The following states can appear:

DEACTIVATED - This state prevents any new jobs from starting on this host.

ACTIVE - The media server is available to run any jobs.

ACTIVE-DISK - The media server is available to run jobs for disk storage units only.

ACTIVE-TAPE - The media server is available to run jobs for tape storage units only.

OFFLINE - The media server is not available to run jobs for either tape storage units or disk storage units. This state occurs because the media server is not active for tape or disk, or because the master server cannot communicate with the media server.

-nh ndmp_hostname

Specifies the host name of the NDMP server.

-activate_host

Makes the host available to run jobs.

-deactivate_host

Makes the host unavailable to run jobs.

-path drivepath

Specifies the system name for the drive. For example, /dev/rmt/0cbn.

-setpath drivepath drive_name ndmp_hostname

Specifies the system name and the drive name of the NDMP host.

NOTES

Only limited validation of the option parameters is done.

tpconfig -d, tpconfig -l, and vmoprcmd may truncate long drive names. Use tpconfig -dl to obtain the full drive name.

vmoprcmd may truncate drive names to 20 characters.

EXAMPLES

Example 1 - Set the drive, with a drive index of 0, to UP mode:

# vmoprcmd -up 0

Example 2 - Display the drive status of all drives:

# vmoprcmd -d ds

Example 3 - Display pending requests and the drive status of all drives on the device host named crab:

# vmoprcmd -h crab

Example 4 - Demonstrate how non-NDMP Windows device paths appear.

# vmoprcmd 

                           HOST STATUS
Host Name                                  Version   Host Status
=========================================  =======   ===========
hamex                                       600000      ACTIVE

                            PENDING REQUESTS
                                <NONE>
                              DRIVE STATUS

Drive Name           Label   Ready  RecMID  ExtMID  Wr.Enbl. Type
    Host                   DrivePath                         Status
===================================================================
IBM.ULTRIUM-TD2.001    No      No                     No     hcart2
    hamex                   {3,1,0,2}                         TLD
    hamex                   {3,1,1,2}                         TLD

IBM.ULTRIUM-TD1.004    No      No                     No     hcart
    hamex                   {3,1,0,7}                         TLD
    hamex                   {3,1,1,7}                         TLD

IBM.ULTRIUM-TD2.005    Yes     Yes    J945L2          Yes    hcart2
    hamex                   {3,1,2,1}                         TLD

IBM.ULTRIUM-TD2.006    No      No                     No     hcart2
    hamex                   {3,1,2,2}                         TLD

# vmoprcmd -downbyname IBM.ULTRIUM-TD1.004 -path {3,1,0,7}