Backup Manager용 NetBackup IT Analytics Data Collector 설치 설명서

Perl 패키지를 아직 설치하지 않은 경우 Perl 5.6 이상을 다운로드하여 설치하십시오.

다음 예에 나와 있는 것처럼 net-snmp를 설치하십시오.

  
     # /usr/local/bin/snmpconf -g basic_setup
     *** Beginning basic system information setup ***
     Do you want to configure the information returned in the system MIB group
     (contact info, etc)? (default = y): no
     Do you want to properly set the value of the sysServices.0 OID (if you don't know, just say no)? (default = y): no
     *** BEGINNING ACCESS CONTROL SETUP ***
     Do you want to configure the agent's access control? (default = y):
     Do you want to allow SNMPv3 read-write user based access (default = y): no
     Do you want to allow SNMPv3 read-only user based access (default = y): no
     Do you want to allow SNMPv1/v2c read-write community access (default = y): no
     Do you want to allow SNMPv1/v2c read-only community access (default = y): yes
     Configuring: rocommunity
     Description:
     a SNMPv1/SNMPv2c read-only access community name arguments: community [default|hostname|network/bits] [oid]
     The community name to add read-only access for: public
     The hostname or network address to accept this community name from [RETURN for all]:
     The OID that this community should be restricted to [RETURN for norestriction]:
     Finished Output: rocommunity public
     Do another rocommunity line? (default = y): no
     *** Beginning trap destination setup ***
     Do you want to configure where and if the agent will send traps? (default= y): no
     *** Beginning monitoring setup ***
     Do you want to configure the agent's ability to monitor various aspects of your system? (default = y): no
     The following files were created:
     snmpd.conf

snpd.conf 파일을 다음 위치 중 하나로 이동하십시오.

root 사용자가 /usr/local/sbin/snmpd에 위치한 snmpd 실행 파일을 시작하는지 확인하십시오.