NetBackup IT Analytics Help

Last Published:
Product(s): NetBackup IT Analytics (11.0)
  1. Section I. Introducing NetBackup IT Analytics
    1. Introduction
      1.  
        Overview
      2.  
        Licensed modules
      3.  
        NetBackup IT Analytics components
  2. Section II. Certified configurations
    1. Portal and database servers
      1.  
        Portal supported operating systems
      2.  
        Recommended portal configurations
      3.  
        Software and hardware disclaimer
      4. Supported browsers and display resolution
        1.  
          Linux portal server: Exported and emailed reports
      5.  
        Supported third-party and open source products
      6.  
        Oracle database and memory requirements
    2. Data Collector server configurations
      1.  
        Data Collector supported operating systems
      2. Data Collector server memory and CPU guidelines
        1.  
          Customize the Linux file handle setting for large collections
        2.  
          Factors impacting Data Collector performance and memory requirements
      3.  
        Data Collector prerequisites
      4.  
        Firewall configuration: Default ports
    3. Capacity Manager configurations
      1.  
        Supported storage arrays and access requirements
      2.  
        IBM Arrays: Modify profile
      3.  
        Creating a NetApp user with API privileges
      4.  
        Creating a NetApp cluster-mode user with API privileges
      5. Array/LUN performance Data Collection
        1.  
          Port performance metrics
      6. EMC Isilon array performance metrics
        1.  
          EMC Isilon Array Performance
        2.  
          EMC Isilon Disk Performance
        3.  
          EMC Isilon Node Performance
        4.  
          EMC Isilon OneFS Performance
        5.  
          EMC Isilon Protocol Performance
      7. NetApp Cluster-Mode performance metrics
        1.  
          NetApp Cluster-Mode Aggregate Performance
        2.  
          NetApp Cluster-Mode CIFS Performance
        3.  
          NetApp Cluster-Mode Disk Performance
        4.  
          NetApp Cluster-Mode Fiber Channel Protocol Logical Interface Performance
        5.  
          NetApp Cluster-Mode LUN Performance
        6.  
          NetApp Cluster-Mode NFS Performance
        7.  
          NetApp Cluster-Mode Processor Node Performance
        8.  
          NetApp Cluster-Mode Processor Performance
        9.  
          NetApp Cluster-Mode RAID Performance
        10.  
          NetApp Cluster-Mode SMB (Server Message Block) Performance
        11.  
          NetApp Cluster-Mode System Performance
        12.  
          NetApp Cluster-Mode Target Port Performance
        13.  
          NetApp Cluster-Mode Volume Performance
      8. EMC Symmetrix enhanced performance metrics
        1.  
          Create enhanced EMC Symmetrix Performance report templates
        2.  
          EMC Symmetrix Array Performance
        3.  
          EMC Symmetrix Backend Director Performance
        4.  
          EMC Symmetrix Frontend Director Performance
        5.  
          EMC Symmetrix Front-end Port Performance
        6.  
          EMC Symmetrix Storage Group Performance
        7.  
          EMC Symmetrix Database Performance
        8.  
          EMC Symmetrix Disk Group Performance
        9.  
          EMC Symmetrix Disk Performance
        10.  
          EMC Symmetrix Device Groups Performance
        11.  
          EMC Symmetrix Disk by Technology Performance
        12.  
          EMC Symmetrix Storage Tier Performance
        13.  
          EMC Symmetrix Thin Tier Performance
        14.  
          EMC Symmetrix Thin Pool Performance
        15.  
          EMC Symmetrix Enhanced Performance metrics
      9.  
        Host resources prerequisites and configurations
      10. Host access privileges, sudo commands, ports, and WMI proxy requirements
        1.  
          Access requirements by OS
      11.  
        WMI proxy requirements for Windows host Data Collection
      12.  
        Host resources supported configurations
      13.  
        Pure Storage Flash Array performance metrics
      14.  
        Supported host bus adapters (HBAs)
      15.  
        Compute Resources supported configurations
    4. Cloud configurations
      1.  
        Supported systems and access requirements
    5. Virtualization Manager configurations
      1.  
        Supported versions
      2. Virtualization Manager Data Collector requirements for VMware
        1.  
          Creating a VMware Read-Only user
      3.  
        Virtualization Manager Data Collector requirements for Microsoft Hyper-V
    6. File Analytics configurations
      1. Data Collector probes by storage type
        1.  
          CIFS shares
        2.  
          Host inventory probe
        3.  
          File Analytics probe
    7. Fabric Manager configurations
      1. Switch vendors
        1.  
          Download Cisco Data Center Network Manager
    8. Backup Manager configurations
      1.  
        Backup solutions and versions
      2.  
        Centralized NetBackup Data Collection requirements
      3. Veritas NetBackup 8.1 (and later) requirements for centralized collection
        1.  
          Required Software
    9. ServiceNow configurations
      1.  
        ServiceNow configurations
    10. Internal TCP port requirements
      1.  
        Internal TCP port requirements
      2.  
        Internal portal server ports
      3.  
        Internal data collector ports
  3. Section III. End user
    1. Understand the portal
      1.  
        Overview
      2.  
        Portal access
      3.  
        Portal overview
      4.  
        Navigating with search
      5.  
        Valid entries for search
      6.  
        Search results view: Narrowing the scope
      7.  
        Filtering data in management grids
      8.  
        Advanced filtering
      9.  
        Customizing advanced filter logic
      10.  
        Saving advanced filters (Inventory)
      11.  
        Advanced filtering examples
      12.  
        Advanced filter operators
      13.  
        Clear advanced filters
      14.  
        Delete saved advanced filters
      15.  
        Select columns on management pages
      16.  
        Detect alerts in the inventory
      17.  
        About the Inventory tab
      18.  
        About the Reports tab
      19.  
        Reports tab keyboard shortcuts
      20.  
        Reports tab basics
      21.  
        Templates, reports, and dashboards overview
      22.  
        About the Alerts tab
      23. About the Admin tab
        1.  
          Users
        2.  
          Domains
        3.  
          Chargeback
        4.  
          Solutions
        5.  
          Data Collection
        6.  
          Reports
        7.  
          Advanced
    2. Explore your inventory
      1.  
        Exploring your inventory
      2.  
        Inventory privileges
      3.  
        Getting started with the Inventory navigator
      4. Hierarchy toolbar to organize your data
        1.  
          Attribute value limitations
        2.  
          Selection combinations
      5.  
        Inventory object limits
      6. Show objects
        1.  
          Backup Servers in the Inventory
        2.  
          Count values
      7.  
        Reset inventory defaults
      8.  
        Host groups
      9. Use attributes to organize your data
        1.  
          System attributes
        2.  
          Attribute value limitations
      10.  
        Use host groups to organize your data
      11.  
        Create custom object lists
      12.  
        Working with the inventory reports view
      13.  
        Accessing inventory reports
      14.  
        Choose reports to display
      15.  
        Filter within available reports by category
      16. Pin reports - saving reports with inventory objects
        1.  
          Rename pinned tabs
        2.  
          Reset default report names on pinned tabs
      17.  
        Inventory reports and the action menu
      18.  
        Work with the inventory list view
      19.  
        Filter the inventory list view
      20.  
        Manage objects in the inventory list view
      21. Assign attributes in the inventory list view
        1.  
          About attributes
        2.  
          Attribute limitations
      22.  
        Set attribute values in the inventory list view
      23.  
        Import host attribute values
      24.  
        Export objects from the inventory list view
      25.  
        Delete objects using the inventory list view
      26.  
        Customize columns in the inventory list view
    3. Get acquainted with reports
      1.  
        Overview
      2.  
        Reports and templates
      3.  
        Cloud reports and templates
      4.  
        Report library
      5.  
        Report orientation
      6.  
        Shared reports and dashboards
      7.  
        About dashboards
      8.  
        Work in the Reports tab
      9.  
        New badge
      10.  
        About caching
      11.  
        Sections in the navigation panel
      12. About badging
        1.  
          Home section
        2.  
          Cloud section
      13.  
        About the action bar
      14.  
        Reports tab keyboard shortcuts
      15.  
        Folder types
      16.  
        Report template icons
      17.  
        Navigate through reports
    4. Generate and maintain reports
      1.  
        Report Scope
      2. Select Report Scope
        1.  
          Time Period Considerations
      3.  
        Configure report scope with attributes
      4. Group hosts by attributes
        1.  
          Host attributes examples
        2.  
          Find hosts without an attribute value set
      5. Search for hosts in the report Scope Selector
        1.  
          Find hosts example
      6.  
        Alert scope selector settings
      7.  
        Amazon Web Services (AWS) scope selector settings
      8.  
        Backup Manager scope selector settings
      9. Backup Manager advanced scope selector settings
        1.  
          Examples of Advanced Options Job Types
      10.  
        Capacity Manager scope selector settings
      11.  
        Data Collection Status Details scope selector settings
      12.  
        Host scope selector settings
      13. Solution reports scope selector settings
        1.  
          Cascade to Sub-Domains
        2.  
          Storage Optimization Scope Selector
        3.  
          Risk Mitigation Scope Selector
      14.  
        System health check scope selector
      15.  
        Generate reports
      16.  
        Generate reports from the Cloud
      17. Units of Measure in Reports
        1.  
          Detail Reports
      18.  
        Advanced Filtering for Tabular Reports
      19. Customize report filter logic
        1.  
          Report Filter Operators
        2.  
          Filtering Indicators, Multiple Expressions, Dates, Percentages, Yes/No
      20. Sort columns in reports
        1.  
          To sort columns in a table report
      21.  
        Refresh and set refresh intervals
      22.  
        Modify Reports
      23. Convert tabular report to chart
        1.  
          Convert a chart into a tabular report
      24.  
        Add and remove custom header and footer to a report or dashboard
      25.  
        Set or edit the drill down preference
      26.  
        Access NetBackup web interface from the IT Analytics Portal
      27.  
        View report statistics
      28.  
        Interact with Reports
      29.  
        Work with Topology
      30.  
        Add a note to a Backup Job Details Report
      31.  
        Use new and updated User Report Templates
      32.  
        Use new and updated System Report Templates (Super User only)
      33.  
        Save Reports
      34.  
        Save Cloud Reports
      35.  
        Delete Reports
    5. Distribute, share, schedule, and alert
      1.  
        Exporting Reports and Dashboards
      2.  
        Known Limitations for Donut Charts
      3. Scheduling Exported Reports and Dashboards
        1.  
          To schedule an export of a report and dashboard
        2.  
          Using the Expression Builder
      4.  
        Emailing Reports and Dashboards
      5.  
        Scheduling Emailed Reports and Dashboards
      6.  
        Viewing and Managing Your Scheduled Reports
      7.  
        Schedule Types
      8.  
        Deleting Scheduled Reports and Dashboards
      9.  
        Setting Up Alerts for Tabular Reports
      10.  
        Configuring an alert
      11.  
        Deleting Report-Based Alerts
      12.  
        Share Reports, Dashboards, and Folders
      13.  
        Working with Shared Reports
    6. Organize reports
      1.  
        Work with dashboards
      2.  
        Understand the dashboard Icons
      3.  
        About Cached Reports on Dashboards
      4.  
        Create new dashboards and add reports
      5.  
        Add reports to an existing dashboard
      6.  
        Save a dashboard with a different name
      7.  
        Customize a Dashboard
      8.  
        Edit the scope for a report on a dashboard
      9.  
        Edit the dashboard scope
      10.  
        Expand a report to full size on a dashboard
      11.  
        Set the dashboard layout
      12.  
        Delete a dashboard
      13.  
        Remove reports from dashboards
      14.  
        Create a custom report folder
      15.  
        Create shortcuts to reports and templates
      16.  
        Manage My Home Pages
      17.  
        User Home Pages and User Group Home Pages
    7. Work with the dynamic template designer
      1.  
        Dynamic Template Designer Overview
      2.  
        Dynamic Template Designer Cheat Sheet
      3.  
        Modify an Out-of-the-Box Dynamic Template
      4. Dynamic Template Designer Quick Start
        1.  
          Quick Start Step 1: Create a Basic Table Dynamic Template
        2.  
          Quick Start Step 2: Format Fields
        3.  
          Quick Start Step 3: Create a Calculated Field
        4.  
          Quick Start Step 4: Configure Table Column Totals
        5.  
          Quick Start Step 5: Define the Scope Selector
        6.  
          Quick Start Step 6: Generate a Report and View the Automatically Generated Help
      5.  
        Steps to Create Dynamic Templates
      6.  
        Working with Enterprise Objects and Fields
      7.  
        Select an Enterprise Object
      8.  
        Configure General Dynamic Template Designer Components
      9. Converting to a Homogeneous, Product-Specific Template
        1.  
          Copy from All
      10.  
        Add Fields and Methods to a Dynamic Template
      11.  
        Alias Names for Fields
      12.  
        Conditions When Hidden Fields are Included by Default
      13.  
        Dynamic Template Field Configuration
      14.  
        Valid Formatter Patterns
      15.  
        Examples of Dynamic Templates Containing Graphics Tool Tips
      16.  
        Dynamic Template Drilldown Configuration
      17.  
        Custom Drilldowns and Examples
      18.  
        Drilldown Parameters
      19.  
        Examples of Dynamic Templates Containing Drilldowns
      20.  
        Dynamic Template Designer Example
      21.  
        Using Groups in Dynamic Templates
      22.  
        Add a Group to Create Separate Line Charts in a Report
      23.  
        Add a Group to Create a Double Header in a Tabular Report
      24. Dynamic Template Function Configurations
        1.  
          Aggregation Functions
        2.  
          Comparison Functions
        3.  
          Numeric Functions
        4.  
          Character Functions
        5.  
          Date Functions
        6.  
          Character String Returning Numeric Values
        7.  
          Null Function
        8.  
          Decode Function
        9.  
          Unique Function
      25.  
        Examples of Dynamic Templates Containing Functions
      26.  
        Create User-Defined Fields with the Field Builder
      27. Create Fields with the Field Builder
        1.  
          Convert Dates to Numbers in the Field Builder
        2.  
          Syntax for Calculated Fields
        3.  
          Examples of Calculated Fields in a Dynamic Template
      28.  
        Configure a Static Filter
      29.  
        Filter on Date Fields
      30.  
        Static Filter vs. Tabular Report Filter
      31.  
        Configure the Field Sort Order
      32.  
        Return Unique Results
      33.  
        Dynamic Template Scope Selector Components
      34. Scope Selector Component - Custom Filter
        1.  
          Define a Custom Filter at Run Time
        2.  
          Custom Filter Operators for Numeric Fields
        3.  
          Custom Filter Operators for String Fields
      35.  
        Data Domain Enterprise Object Scope Selector Components
      36.  
        Host Enterprise Object Scope Selector Components
      37.  
        Job Enterprise Object Scope Selector Components
      38.  
        Storage Array Enterprise Object Scope Selector Components
      39.  
        Customize and Export Dynamic Templates
      40.  
        Export/Import Dynamic Templates Containing Custom Attributes
      41.  
        Export a dynamic template that contains attributes
      42.  
        Import a dynamic template that contains attributes
      43.  
        Save a Dynamic Template After Edits
      44.  
        Format the Dynamic Template Output
      45. Configure a Bar Chart Dynamic Template
        1.  
          Best Practices
      46. Steps to Create a Bar Chart Dynamic Template
        1.  
          Bar Chart Dynamic Template: Use Case
        2.  
          Bar Chart Dynamic Template Step 1: Create a Dynamic Template
        3.  
          Bar Chart Dynamic Template Step 2: Configure Basic Field Functionality
        4.  
          Bar Chart Dynamic Template Step 3: Configure Functions for a Field
        5.  
          Bar Chart Dynamic Template Step 4: Configure Drilldowns for a Field
        6.  
          Bar Chart Dynamic Template Step 5: Configure a Line Field
        7.  
          Bar Chart Dynamic Template Step 6: Define the Scope Selector
        8.  
          Bar Chart Dynamic Template Step 7: Save and Run the Report Template
      47.  
        Examples of Bar Chart Dynamic Templates
      48. Configure an Area/Stacked Area Chart Dynamic Template
        1.  
          Area/Stacked Area Chart Dynamic Template Step 1: Create a Dynamic Template
        2.  
          Area/Stacked Area Chart Dynamic Template Step 2: Configure Basic Field Functionality
        3.  
          Area/Stacked Area Chart Dynamic Template Step 3: Configure Functions for a Field
        4.  
          Area/Stacked Area Chart Dynamic Template Step 4: Define the Scope Selector
        5.  
          Area/Stacked Area Chart Dynamic Template Step 5: Save and Run the Report Template
      49.  
        Configure a Donut Chart Dynamic Template
      50.  
        Example of a Donut Chart Dynamic Template
      51.  
        Configure a Horizontal Bar Chart Dynamic Template
      52.  
        Example of a Horizontal Bar Chart Dynamic Template
      53.  
        Configure a Horizontal Stacked Bar Chart Dynamic Template
      54.  
        Example of a Horizontal Stacked Bar Chart Dynamic Template
      55.  
        Configure a Line Chart Dynamic Template
      56. Line Charts for Performance Metrics
        1.  
          Identify Array Performance Data Fields for a Template
        2.  
          Rules and Guidelines for Performance Line Charts
      57.  
        Steps to Create a Line Chart Dynamic Template
      58. Line Chart Field Requirements
        1.  
          Line Chart: Caption Field
        2.  
          Line Chart: Line Field
        3.  
          Line Chart: Group by Object Field
        4.  
          Line Chart: Hidden Field
        5.  
          Line Chart: Exclude Field
      59. One Object Per Line Chart, One or More Metrics Per Chart
        1.  
          Configure One Object Per Line Chart
        2.  
          Field Configuration for One Object Per Line Chart
        3.  
          Scope Selector Configuration for One Object Per Line Chart
      60. Multiple Objects Per Line Chart, One Metric Per Chart
        1.  
          Field Configuration for Multiple Objects Per Line Chart, One Metric Per Chart
      61.  
        Format Line Chart Fields
      62.  
        Line Chart Scope Selections
      63.  
        Examples of Line Chart Dynamic Templates
      64.  
        Configure a Pie Chart Dynamic Template
      65.  
        Examples of Pie Chart Dynamic Templates
      66.  
        Configure a Stacked Bar Chart in a Dynamic Template
      67. Example of a Stacked Bar Chart Dynamic Template
        1.  
          Configure a Line in a Bar Chart
      68.  
        Configure a Table Dynamic Template
      69.  
        Examples of Tabular Dynamic Templates
      70. Create a Sparkline Chart in a Tabular Dynamic Template
        1.  
          Example of a Client Backup Sparkline Chart in a Dynamic Template
        2.  
          Example of Using a Method to Create a Sparkline Chart in a Dynamic Template
        3.  
          Client Failure Sparkline Method
      71.  
        Configure Chart Axes
      72.  
        Using Methods in Dynamic Templates
      73.  
        Overview of Method Creation
      74.  
        System Methods
      75.  
        Stand-Alone Methods
      76.  
        Viewing Methods
      77. Adding or Editing Methods
        1.  
          User-Defined Methods
        2.  
          System Methods
        3.  
          Accessing Methods
      78.  
        Tokens for Methods
      79.  
        Exception Tables for a Method's Join Clause
      80. Validate and Save a Method
        1.  
          Method Validation
      81.  
        Delete a Method
      82.  
        Troubleshooting Dynamic Templates
    8. Work with the SQL template designer
      1.  
        SQL template designer overview
      2.  
        Database Published Views
      3.  
        Access the Database Published Views from the CLI
      4.  
        Access the Database Published Views from the SQL Template Designer
      5.  
        Steps to Create SQL Templates
      6.  
        Create a SQL Template
      7. Configure SQL Template Scope Selector Components
        1.  
          Date Range
        2.  
          Host Groups and Client Scope
        3.  
          Array Scope Selector
        4.  
          Datastore Scope Selector
        5.  
          VM Servers Scope Selector
        6.  
          VM Guests Scope Selector
        7.  
          Custom Text Fields
        8.  
          Example of Custom Text Field Configuration in a SQL Template
        9.  
          Access Help for Database Views
        10.  
          Static Custom Combo Box
        11.  
          Example of a Combo Box Configuration in a SQL Template
        12.  
          Query Custom Combo Box
        13.  
          Example of a Query Custom Combo Configuration in a SQL Template
      8.  
        Construct the SQL Query
      9.  
        Help for Database Views
      10.  
        Accessing the Published Database Views from the CLI
      11.  
        Special Characters in SQL Queries
      12. Sample SQL Queries
        1.  
          Example of a Query for Host Attributes
        2.  
          Using the apt_v_server_attribute View in Queries
        3.  
          Considerations for Attributes Used in SQL Template Designer Queries
        4.  
          Example of a Query of Failed Backup Jobs
        5.  
          Example of the SQL Custom Join Feature in a SQL Template
        6.  
          Example of a Sparkline Query in a SQL Template
        7.  
          Example of Sums in a SQL Template
        8.  
          Example of Using a Special Character as a Literal in a SQL Query
      13.  
        Use Functions in Queries
      14.  
        Format the SQL Template Output
      15. Number, Size, Date, and Time Formatting
        1.  
          Examples of Negative Value Formatting
        2.  
          Status Icon Values
      16. Alignment, Aggregation, Bar Type, and Bar Type Color
        1.  
          Configuring a Header and Footer in a Custom Report Template
      17.  
        Area, Line or Column Sparkline Format for a SQL Tabular Report Template
      18.  
        Configure a Bar Chart SQL Template
      19.  
        Example of a Bar Chart SQL Template: Host CPU Performance
      20.  
        Configure a Line Chart SQL Template
      21.  
        Configure a Donut Chart SQL Template
      22.  
        Example of a Donut Chart SQL Template: NetBackup Job Size by Job Type
      23.  
        Configure a Gauge Chart SQL Template
      24.  
        Example of a Gauge Chart SQL Template: Allocated Capacity
      25.  
        Configure a Horizontal Bar Chart SQL Template
      26.  
        Example of a Horizontal Bar Chart SQL Template: Host CPU Performance
      27.  
        Configure a Horizontal Stacked Bar Chart SQL Template
      28.  
        Example of a Horizontal Stacked Bar Chart SQL Template: Available/Allocated Capacity
      29.  
        Configure an Area Chart SQL Template
      30.  
        Example of Area Chart SQL Template: Allocated Available
      31.  
        Configure a Pie Chart SQL Template
      32.  
        Example of a Pie Chart SQL Template: Overall Job Status Summary
      33.  
        Configure a Pivot Table SQL Template
      34.  
        Example of a Pivot Table SQL Template: NetBackup Job Size
      35.  
        Configure a Stacked Bar Chart SQL Template
      36.  
        Example of a Stacked Bar Chart SQL Template: Host CPU Performance
      37.  
        Configure a Table in the SQL Template Designer
      38.  
        Example of a Table SQL Template: Host Group Membership List
      39.  
        Example of a Table SQL Template: Exposed Clients
      40.  
        Save and Share Report Templates
      41.  
        Advanced SQL Report Template Options
      42.  
        Creating Drilldowns
      43.  
        Using SQL Templates for Drilldowns
      44.  
        Create mouse-over hovers
      45.  
        Add an External Reference
      46.  
        Inventory Report Configuration
      47.  
        About the Reports in the Inventory
      48.  
        Edit a Custom Report Template
      49.  
        Export/Import SQL Templates
      50.  
        Export a SQL Template
      51.  
        Import a SQL Template
    9. Pipelined functions for report query building
      1.  
        About Pipelined Functions
      2.  
        General Functions
      3. APTlistOfDates
        1.  
          Example Query
      4. aptStringConcat
        1.  
          Example Query
      5.  
        collectString
      6.  
        getLicenseClientDetail
      7. getServerAttributeValue
        1.  
          Example Query
      8. getObjectAttributeValue
        1.  
          Example Query
      9. getChildServerGroupContextById
        1.  
          Example Query
      10. getServerGroupContextById
        1.  
          Example Query
      11. secsToHoursMinSecs
        1.  
          Example Query
      12.  
        Backup Manager Functions
      13.  
        APTgetJobTypeName
      14. APTgetTapeDriveStatusName
        1.  
          Example Query
      15. getFullPathname
        1.  
          Example Query
      16. listJobSummaryAfterRestart
        1.  
          Example Query
      17. listJobSummaryAfterRestartNBW
        1.  
          Example Query
      18. listJobSummaryAfterRestart for NetWorker Backup Jobs
        1.  
          Example Query
      19. listOfBackupWindowDates
        1.  
          Explicitly Supply the Backup Windows
        2.  
          Example Query
      20.  
        listOfBackupWindowDates (by Backup Window ID)
      21.  
        Policy Auditing Functions
      22.  
        listClientChanges
      23.  
        listPathnameChanges
      24.  
        listPolicyChanges
      25.  
        listScheduleChanges
      26.  
        Capacity Functions
      27. listChargebackCatByVOLSDetail
        1.  
          Example Query
      28. listChargebackCatByNcVolDetail
        1.  
          Example Query
      29. listChargebackCatByFSDetail (for HNAS)
        1.  
          Example Query
      30. listChargebackCatByFSDetail (for EMC Isilon)
        1.  
          Example Query
      31. listChargebackByLUNSummary
        1.  
          Example Query
      32. listChargebackByLUNDetail
        1.  
          Chargeback in Cluster and Virtualization Environments
        2.  
          Example Query
      33. listChargebackCatByLUNSummary
        1.  
          Example Query
      34. listChargebackCatByLUNDetail
        1.  
          Example Query
    10. Alert configuration
      1.  
        Overview
      2.  
        Alert rules
      3.  
        Scheduled Rules vs. Run Time Rules
      4.  
        Alert rules sample set
      5.  
        Managing alert policies
      6. Add/Edit an Alert Policy
        1.  
          Select an Alert Rule
        2.  
          Name the Policy and define Time Intervals
        3.  
          Define the Scope to Monitor
        4.  
          Scope Example: Data Protection: Monitor for High Job Failure Rate
        5.  
          Scope Example: Data Protection: Monitor Backup Jobs
        6.  
          Set the Threshold for an Alert Rule
        7.  
          Show Baseline Example
      7.  
        License Usage Alert Rule
      8.  
        ServiceNow: Job finalized alert rule
      9.  
        Scope Example: Data Protection: ServiceNow Jobs
      10.  
        Copying an Alert Policy
      11.  
        Deleting an Alert Policy
      12.  
        Managing alert notifications
      13.  
        Adding an Alert Notification Delivery Method
      14.  
        Deleting an Alert Notification Delivery Method
      15.  
        Report-Based alerts
      16.  
        Edit notifications for Report-Based Alerts
      17.  
        Run a Report-Based Alert On-Demand
      18.  
        Delete Report-Based Alert
      19.  
        Syslog configuration
      20.  
        Detect alerts in the inventory
      21.  
        Suppress alert notifications
      22.  
        View suppressed alerts
    11. Manage hosts, backup servers, and host groups
      1.  
        About hosts, backup servers, and host goups
      2.  
        Plan your host group hierarchy
      3.  
        Manage host groups
      4.  
        Add Host Groups and Sub-Groups
      5.  
        About Host Group Operations
      6.  
        Add Host Groups
      7.  
        Automated Tool to Create Host Groups
      8.  
        Host Group Membership
      9.  
        Rename Host Groups
      10.  
        Delete Host Groups
      11.  
        Move Host Groups
      12.  
        Find a Host Group ID
      13.  
        Assign a User Home Host Group
      14.  
        Manage Backup Servers
      15. NetBackup Master Servers
        1.  
          Configure the Time Zone for a NetBackup Master Server
        2.  
          Default Host Group Hierarchy for Veritas NetBackup
      16.  
        About the Master Servers Group
      17.  
        Identifying Inactive Clients (For Veritas NetBackup)
      18.  
        Managing hosts and backup servers
      19.  
        Adding and Editing Hosts and Backup Servers
      20.  
        Import Hosts
      21.  
        Decommission/Recommission Hosts and Backup Servers
      22.  
        Deleting Hosts
    12. Manage attributes and objects
      1.  
        About attributes
      2.  
        Attribute example
      3.  
        Host groups vs attributes
      4.  
        Bulk load utilities and attributes
      5.  
        System attributes
      6.  
        Attribute inheritance
      7.  
        Manage attributes
      8.  
        Set attributes on hosts
      9.  
        Add attributes
      10.  
        Edit or rename attributes
      11.  
        Delete attributes
      12.  
        Attribute naming rules
      13.  
        Examples of attributes and values
      14.  
        Understanding the attribute management view
      15.  
        Attribute management view (Top-Level domain)
      16.  
        Attribute management view (Sub-Domain)
      17.  
        Export/Import dynamic templates with custom attributes
      18.  
        About object maintenance
      19.  
        Product specific objects for reporting
      20.  
        Maintaining objects
      21.  
        Assign attributes using object maintenance
      22.  
        Search for objects by type in object maintenance
      23.  
        Customize library objects
      24.  
        Permanently remove devices, libraries, and drives
    13. Provide Portal access and user privileges
      1.  
        Providing user access to the portal
      2.  
        Creating portal user accounts
      3.  
        About user types
      4.  
        Selecting user groups for users
      5.  
        Working with user groups
      6.  
        Creating user groups
      7.  
        Assigning users to user groups
      8.  
        About user privileges
      9.  
        Assigning user privileges
      10.  
        Setting user group privileges
      11.  
        Enabling new product report templates
      12.  
        Enabling cloud privileges
      13.  
        Importing reports
      14.  
        Granting access to template designers
      15.  
        Enabling all privileges in a category
      16.  
        Managing users and user groups
      17.  
        Searching for users and user groups
      18.  
        Editing user accounts
      19.  
        Impersonating user accounts
      20. Setting / Resetting passwords
        1.  
          Password notes
      21.  
        Account lockout
      22. Managing user group home pages (Administrator)
        1.  
          My Home pages and user group home pages (Administrator)
      23.  
        Removing portal users
      24.  
        Deactivating user accounts
    14. Configure master schedules and backup windows
      1.  
        About master schedules
      2.  
        Configure master schedules
      3.  
        About custom backup windows
      4.  
        Custom backup window requirements
      5.  
        Configure custom backup windows
    15. Add, edit, and move policies
      1.  
        Add/Edit a Cloud Policy to share performance statistics
      2.  
        Configure community performance profiling
      3. Add/Edit a threshold policy
        1.  
          Threshold Example
      4.  
        Add/Edit a capacity billing and usage policy
      5. Capacity Chargeback policy types
        1.  
          Example of Capacity Billing and Usage Policy Logic
        2.  
          Drive Types for Capacity Chargeback
      6.  
        Add/Edit a backup SLA policy
      7.  
        Add/Edit a SAN Fabric Chargeback policy
      8.  
        NetBackup IT Analytics Billing and Chargeback policies
      9.  
        Add/Edit a Billing and Chargeback policy
    16. Solutions administration
      1.  
        Storage Optimization solution overview
      2.  
        Understand the value of Storage Optimization historical data
      3. Configure Storage Optimization rules
        1.  
          Edit Storage Optimization Rule Example
        2.  
          Common storage optimization parameters
      4.  
        Enable Storage Optimization rules
      5.  
        Storage optimization rule prerequisites and logic
      6.  
        Risk Mitigation solution overview
      7.  
        Configure Risk Mitigation rules
    17. Manage and monitor data collection
      1.  
        Data collection overview
      2.  
        Data collection component configuration
      3. About data collection tasks
        1.  
          Backup collection tasks
        2.  
          Backup event data collector
      4.  
        Data collection installation summary
      5.  
        Update the Local Hosts file for data collection
      6.  
        Data Collector security and data encryption
      7.  
        Manage Data Collectors and collection policies
      8.  
        About validation and status
      9. Add/Edit data collectors
        1.  
          Data Collector Encryption
      10.  
        Enable/Disable data collectors
      11.  
        Enable and disable data collection policy schedules
      12. Review collectors and collection status
        1.  
          Known Limitations for Policy States in Collector Administration
      13.  
        Deleting a data collector
      14. Upgrade Data Collectors
        1.  
          Upgrade aptare.jar
        2.  
          Update Upgrade Manager
      15.  
        Monitoring data collection status
      16.  
        Organize the collection status view
      17.  
        Quick Filters
      18.  
        View data collection status
      19.  
        Troubleshoot data collection status
      20.  
        Use reports to monitor data collection status
    18. Work with Capacity Manager host data collection
      1.  
        Understand the host data collection process
      2.  
        Host resources prerequisites and configurations
      3. Host access requirements
        1.  
          For Linux Hosts Only
        2.  
          For Windows Hosts Only
      4.  
        Command path verification
      5.  
        Host discovery and collection configuration steps
      6.  
        Host discovery and collection setup overview
      7.  
        Host discovery and collection maintenance overview
      8.  
        Before discovering hosts
      9.  
        Configure/Search
      10. Manage credentials
        1.  
          Example of credentials for Windows hosts
      11.  
        Manage WMI Proxy
      12.  
        Manage paths
      13.  
        Manage access control
      14.  
        Host management
      15. Configure host discovery policies to populate the host discovery and collection view
        1.  
          Discovery policy considerations
        2.  
          Configure a Discovery policy
      16. Validate host connectivity
        1.  
          Validate hosts
        2.  
          Validation history
      17.  
        Show errors
      18.  
        Filter the host discovery and collection window - Hide/Unhide, remove
      19. Search and export in host discovery and collection
        1.  
          Basic Search
        2.  
          Pre-Defined Search
        3.  
          Advanced Parameters
      20.  
        Export in host discovery and collection
      21.  
        Configure and edit host probes
      22. Propagate probe settings: Copy probes, paste probes
        1.  
          Example of Probe Copy/Paste
        2.  
          Probe Settings
    19. Discovery policies for Veritas NetBackup
      1.  
        Task overview: Configure and monitor discovery policies
      2.  
        Discovery policies overview
      3. About Discovery types
        1.  
          Client drive discovery
        2.  
          Media server disk discovery
        3.  
          Backup policy coverage
      4.  
        Activate a discovery license
      5.  
        Exclude devices from discovery policies
      6.  
        Activate discovery probes in the NetBackup Data Collector policy
      7.  
        Monitor discovery processes
      8.  
        View client protection status
    20. View and manage system notifications
      1.  
        Overview
      2.  
        Viewing system alerts
      3.  
        Defer or suppressing notifications
    21. Customize with advanced parameters
      1.  
        Overview of advanced parameters
      2.  
        Use cases for advanced parameters
      3.  
        Adding an advanced parameter
      4. Access control advanced parameters
        1.  
          ACCESS_CONTROL_FALLBACK_STRINGS
        2.  
          ACCESS_CONTROL_PASSWORD_PROMPT
        3.  
          ACCESS_CONTROL_SKIP_COMMAND_OUTPUT
        4.  
          ACCESS_CONTROL_TTY_REQUIRED
        5.  
          ACCESS_CONTROL_TTY_REQUIRED_ERROR
        6.  
          ACCESS_CONTROL_TTY_REQUIRED_NUM_LINES_SKIP
      5. General Data Collection advanced parameters
        1.  
          DC_START_CONNECT_RETRIES
        2.  
          COMMAND_TIMEOUT
        3.  
          DATARCVR_READ_TIMEOUT
        4.  
          LOGGING_LEVEL
        5.  
          METACOLLECTOR_MAX_THREADS
        6.  
          METACOLLECTOR_MIN_THREADS
        7.  
          PATH_CONTROL_PARAM
        8.  
          SSH_ALTERNATE_PKG_USE
        9.  
          SSH_CHANNEL_WAIT_TIME
        10.  
          SSH_CIPHERS
        11.  
          SSH_DEBUG
        12.  
          SSH_PORT
        13.  
          STDOUT_ERROR
        14.  
          STDOUT_FILTER_LIST
        15.  
          THREAD_IDLE_TIMEOUT
        16.  
          WMI_PROXY_VERSION_TIMEOUT
      6. Cloud data collection advanced parameters
        1.  
          Amazon Web Services (AWS)
        2.  
          Microsoft Azure
      7. Host discovery and collection advanced parameters
        1.  
          APP_DISK_PATH
        2.  
          HBAVERIFY_NUM_DELAY_SECS
        3.  
          HOST_CONNECTION_PROTOCOL
        4.  
          HOST_CONNECTION_TIMEOUT
        5.  
          HOST_SOCKET_TIMEOUT
        6.  
          IGNORE_FILE_SYSTEMS
        7.  
          IS_EMULEX_MAPPING_STRICT_CHECKING
        8.  
          NUM_HBAVERIFY_RUN
        9.  
          STRICT_HOST_KEY_CHECKING
        10.  
          USE_VIO_RESTRICTED_SHELL
      8. Backup Manager advanced parameters
        1.  
          COMMVAULT_OLDEST_JOB_HOURS
        2.  
          MMINFO_MOVE_BACKWARD_MIN
        3.  
          NBU_AUDIT_LOOKBACK_DAYS
        4.  
          NBU_DUP_JOB_PARTIAL_STATUS_OVERRIDE
        5.  
          NO_AVAMAR_CLI
        6.  
          RMAN_BACKUP_LOOKBACK_DAYS
        7.  
          RMAN_BACKUP_LOOKBACK_OVERRIDE
        8.  
          SUPPRESS_KERBEROS_PROMPT
        9.  
          USE_ALT_NBU_INCL_EXCL
        10.  
          USE_NTML_V2
        11.  
          VEEAM_BACKUP_LOOKBACK_DAYS
        12.  
          VEEAM_BACKUP_LOOKBACK_DAYS_OVERRIDE
      9. Capacity Manager advanced parameters
        1.  
          EMC_MULTIPATH_OFF
        2.  
          EMC_VMAX_INCLUDE_ALL_MASKINGVIEWS
        3.  
          HDS_HTM_JPCCTRL_PATH
        4.  
          REMOTE_RAID_AGENT
        5.  
          SYMSTAT_COUNT
        6.  
          SYMSTAT_INTERVAL_SECONDS
      10. File Analytics advanced parameters
        1.  
          FA_CLEAN_UP_TEMPORARY_FILES
        2.  
          AFS_PATH_EXCLUDE_DIRECTORY_NAME
        3.  
          FA_HOST_CAPTURE_REMOTE_SHARES
        4.  
          FA_HOST_DIRECTIVE
      11. Virtualization Manager advanced parameters
        1.  
          VMWARE_COLLECT_UNUSED_PROPERTIES
        2.  
          VMWARE_DATASTORE_TIMEOUT_SECONDS
    22. Manage your Portal environment
      1. Root folder and domains
        1.  
          Root folder
        2.  
          Domain
        3.  
          Multiple domains (for managed services partners only)
      2.  
        Add/Configure a domain
      3.  
        Configure alerting for a domain
      4.  
        Community performance statistics for a domain
      5.  
        Manage your profile and set a language preference
      6.  
        Change your login password
    23. Analyze files
      1.  
        Overview
      2.  
        File categories
      3.  
        Adding/Editing file categories
      4.  
        File list export
      5.  
        File list export output in CSV format
    24. Troubleshoot the Portal
      1.  
        Support tools
      2.  
        Requesting a support package
      3.  
        File selector wildcards
      4. Retrieving log files
        1.  
          On a Windows platform
        2.  
          On a Linux platform
      5.  
        Archiving script
      6. Debug
        1.  
          Debugging Level Scope
      7.  
        Login errors
      8.  
        Add notes to failed jobs
      9.  
        Host name processing - Filters and aliases
      10.  
        Change the Portal server's IP address
      11.  
        Changing the port for Portal server communication
      12.  
        Determine report rendering statistics
      13.  
        Clearing the inventory and report cache
      14.  
        Troubleshoot Oracle performance issues in NetBackup IT Analytics
    25. Attribute inheritance overrides
      1.  
        Overview
      2. Override inherited attribute values
        1.  
          Use case 1
        2.  
          Use case 2
    26. Understand report data caching
      1.  
        Understand report data caching
      2.  
        How reports and caching work together?
      3.  
        Store and purge data
      4.  
        Disable optimistic caching with portal.properties
  4. Section IV. Report Reference
    1. Introduction to NetBackup IT Analytics
      1.  
        Introduction to NetBackup IT Analytics
      2.  
        NetBackup IT Analytics Licensed Modules
      3.  
        NetBackup IT Analytics Components
      4.  
        Portal Server Software
      5.  
        Reporting Database
      6.  
        Data Collectors
    2. Alert Reports
      1.  
        Alert Reports
      2.  
        Alert Delivery Failure
      3.  
        Alert Detail
      4.  
        Alert Detail History
      5.  
        Alert Dashboard
    3. Risk Mitigation Solution Reports
      1.  
        Introduction
      2. Risk Mitigation Reports
        1.  
          Risk Mitigation Analysis
        2.  
          Risk Mitigation Trend
        3.  
          Risk Mitigation Detail Reports
        4.  
          Ransomware Risk Assessment Dashboard
      3.  
        Backup Job Size Variance
      4.  
        Source Consecutive Failure
      5.  
        Source Overall Status Summary
      6.  
        Compliance RTO RPO
      7.  
        Host Multi-Pathing Exposure
      8.  
        Sources with No Recent Backups
      9.  
        Hot Array Ports
      10.  
        Hot LUNs by Read IO
      11.  
        Hot LUNs by Read Response
      12.  
        Hot LUNs by Write IO
      13.  
        Hot LUNs by Write Response
      14.  
        NetBackup Disk Pool Forecast
      15.  
        Thin Pool Forecast
      16.  
        VM Datastore Forecast
      17.  
        VM Guest Disk Forecast
    4. Storage Optimization Solution Reports
      1.  
        Introduction
      2.  
        Storage Optimization Overview
      3.  
        Storage Optimization Analysis
      4.  
        Storage Optimization by Tier
      5.  
        Storage Optimization Trend
      6.  
        Storage Optimization Detail Reports
      7.  
        Storage Optimization Dashboard
      8.  
        Unallocated LUNs
      9.  
        Undiscovered LUNs by Array
      10.  
        Undiscovered LUNs
      11.  
        Unused LUNs by Array
      12.  
        Unused LUNs
      13.  
        Overprovisioned Hosts Summary
      14.  
        Overprovisioned Hosts
      15.  
        Inactive LUNS by Array
      16.  
        Inactive LUNS
      17.  
        VM Aged Snapshots by Datastore
      18.  
        VM Aged Snapshots
      19.  
        VMs Powered Off by VM Server
      20.  
        VMs Powered Off
      21.  
        VMs Low CPU by VM Server
      22.  
        VMs Low CPU
      23.  
        VMs Undiscovered Disks by VM Server
      24.  
        VMs Undiscovered Disks
      25.  
        VMs Not in VM Inventory by Datastore
      26.  
        VMs Not in Inventory
      27.  
        Non-VM Files by Datastore
      28.  
        Non-VM Files
      29.  
        Data Domain File Compression by Host
      30.  
        High Backup Retention Jobs by Sources
      31.  
        Sources Backed Up by Multiple Servers
      32.  
        Inactive Large Files by Host
      33.  
        Inactive Large Files
      34.  
        File Type Usage by Host
      35.  
        File Type Usage
      36.  
        AWS Orphan Snapshots
      37.  
        AWS Orphan Volumes by Account
      38.  
        AWS Orphan Volumes
    5. System Administration Reports
      1.  
        Audit Event Details
      2.  
        Audit Events Summary
      3.  
        Data Collection Message Summary (by group selection)
      4.  
        Data Collection Message Summary
      5.  
        Data Collection Message Detail
      6.  
        Data Collection Activity Detail
      7.  
        Data Collection Hourly Activity
      8.  
        Data Collection Performance Detail
      9.  
        Data Collection Performance Summary
      10.  
        Data Collection Schedule Summary
      11.  
        Cases Not Represented in the Data Collection Schedule Summary
      12.  
        Example of a Data Collector Log Request
      13.  
        Data Collection Status Details
      14.  
        Data Collector Status Summary
      15.  
        Database Error Aggregation
      16.  
        Database Error Summary
      17.  
        File Analytics Collection Status
      18.  
        NetApp Volume Status
      19.  
        License Summary
      20. Oracle Job Overview
        1.  
          Oracle Job Details
      21.  
        Capacity License Usage Details
      22.  
        File Analytics License Usage Details
      23.  
        Virtual Server License Usage Details
      24.  
        Fabric Manager License Usage Details
      25.  
        Backup License Usage Details
      26.  
        Replication License Usage Details
      27.  
        License Overage Detail
      28.  
        Report Activity Summary
      29.  
        Report Activity Detail
      30.  
        Scheduled Reports Summary
      31.  
        Disable or Delete a Scheduled Report
      32.  
        Disable a Scheduled Report
      33.  
        Delete a Scheduled Report
      34.  
        Modify a Schedule
      35.  
        System Health Check
      36.  
        Advance Parameter Details
      37.  
        Top Running Reports
      38.  
        Dashboard Considerations
      39.  
        Top Running Report Details
      40.  
        Version History
      41.  
        WMI Proxy Servers
    6. Capacity Manager Reports
      1.  
        Aggregate Mirror Summary
      2.  
        FlexClone Summary
    7. Application Capacity Reports
      1.  
        Application Storage Dashboard
      2.  
        Application Sub-Level of the Application Storage Dashboard
      3.  
        Applications at Risk
      4.  
        Over-Provisioned Applications
    8. Array Capacity Utilization Reports
      1.  
        Array Capacity and Utilization
      2. Array Capacity & Utilization (Generic Data)
        1.  
          Array/Cluster Summary
        2.  
          Physical Summary or Raw Capacity
        3.  
          Pool Summary
        4.  
          Volume/LUN Summary
      3.  
        Array Capacity & Utilization - (Dell Compellent View)
      4.  
        Array Capacity & Utilization - (EMC Data Domain Storage View)
      5.  
        Array Capacity & Utilization - (EMC VNX Celerra View)
      6.  
        Array Capacity & Utilization - (EMC VNX CLARiiON View)
      7.  
        Array Capacity & Utilization - (EMC VPLEX)
      8.  
        Array Capacity & Utilization - (EMC Isilon View)
      9.  
        Array Capacity & Utilization - (EMC Symmetrix View)
      10.  
        Array Capacity & Utilization (Hitachi Content Platform)
      11.  
        Array Capacity & Utilization (Hitachi Arrays & HDP View)
      12.  
        Array Capacity & Utilization (Hitachi NAS Arrays)
      13.  
        Array Capacity & Utilization - (Hitachi Vantara All-Flash and Hybrid Flash Storage)
      14.  
        HP 3PAR Overview
      15.  
        Array Capacity & Utilization (HP 3PAR View)
      16.  
        Array Summary
      17.  
        Physical Summary
      18.  
        Chunklets
      19.  
        Logical (LD) Summary
      20.  
        Common Provisioning Groups (CPG)
      21.  
        VV Summary
      22.  
        Array Capacity & Utilization (IBM COS)
      23.  
        Array Capacity & Utilization (IBM Enterprise Array View)
      24.  
        Array Capacity & Utilization (IBM Modular Array View)
      25. Array Capacity & Utilization (IBM SVC View)
        1.  
          How IBM SVC Capacity Values Are Derived
      26. Array Capacity and Utilization (IBM XIV View)
        1.  
          XIV Array Summary
        2.  
          Physical Summary
        3.  
          Usable Volumes
        4.  
          Logical Volumes
      27. Array Capacity and Utilization (NetApp View)
        1.  
          NetApp Summary
        2.  
          Physical Summary
        3.  
          Aggregate/Volume Capacity
        4.  
          LUN Capacity
      28. Array Capacity and Utilization (NetApp Cluster)
        1.  
          NetApp Cluster Summary
        2.  
          Physical Summary
        3.  
          Aggregate Summary
        4.  
          Volume Capacity
        5.  
          LUN Summary
        6.  
          Performance
      29. NetApp Storage System Detail
        1.  
          Current Configuration
        2.  
          Cluster Status
        3.  
          Aggregate Utilization
        4.  
          Volume Utilization
        5.  
          Capacity Usage Bar Charts
        6.  
          Aggregate & Volume Capabilities
      30.  
        Array iSCSI Port Utilization
      31.  
        NetApp Cluster-Mode Array iSCSI Port Utilization
      32. Array Capacity and Utilization (OpenStack Swift)
        1.  
          Cluster Summary
        2.  
          Physical Summary
        3.  
          Logical Summary
        4.  
          Performance
      33.  
        Disk Summary
      34.  
        RA Summary
      35.  
        Array Executive Summary
      36.  
        List Array Groups
      37.  
        HP EVA Physical Disks
      38.  
        Array FC Port Utilization
      39.  
        Data Domain Filesystem Compression
      40.  
        Data Domain System Summary - Storage
      41.  
        Data Domain System Details
      42.  
        Data Domain MTree Summary
      43.  
        Data Domain Replication History
      44.  
        Data Domain Snapshot History
      45.  
        EMC Isilon Disks
      46.  
        EMC Isilon HDFS Racks
      47.  
        EMC Isilon HDFS Roots
      48.  
        EMC Isilon License Detail
      49.  
        EMC Isilon NFS Exports
      50.  
        EMC Isilon Nodes
      51.  
        EMC Isilon Quota Summary
      52.  
        EMC Isilon SMB Share Summary
      53.  
        EMC Isilon Snapshot Summary
      54.  
        EMC Isilon Zones
      55.  
        EMC VNX (Celerra) Data Mover Summary
      56.  
        EMC VNX (Celerra) Virtual Data Mover Summary
      57.  
        EMC VNX (Celerra) File System Summary
      58.  
        EMC VNX (Celerra) SnapSure Summary
      59.  
        EMC VNX (Celerra) Storage Pools Summary
      60.  
        EMC VNX (Celerra) Storage Pools Detail
      61.  
        EMC VNX (Celerra) Tree Summary
      62.  
        EMC VNX (Celerra) Volume Summary
      63.  
        EMC VNX (Celerra) Volume Detail
      64.  
        EMC VNX (Celerra) Disk Summary
      65.  
        EMC VNX (Celerra) Storage System Detail
      66.  
        EMC VPLEX Backend Array Summary
      67.  
        EMC VPLEX Device Summary
      68.  
        EMC VPLEX Extent Summary
      69.  
        EMC VPLEX Port Summary
      70.  
        EMC VPLEX Storage View Summary
      71.  
        EMC VPLEX Storage Volume Summary
      72.  
        Object Store Namespace Summary
      73.  
        Node Summary
      74.  
        Object Store Tenant Summary
      75.  
        Hitachi NAS CIFS Share Summary
      76.  
        Hitachi NAS Disk Summary
      77.  
        Hitachi NAS EVS Summary
      78.  
        Hitachi NAS Ethernet Port Summary
      79.  
        Hitachi NAS File System Summary
      80.  
        Hitachi NAS NFS Export Summary
      81.  
        Hitachi NAS Snapshot Summary
      82.  
        Hitachi NAS Storage Pool Summary
      83.  
        Hitachi NAS Storage Server Summary
      84.  
        Hitachi NAS System Drive Summary
      85.  
        Hitachi NAS Tier Summary
      86.  
        Hitachi NAS Virtual Volume Summary
      87.  
        Overview of IBM Array Support
      88. IBM Array Site Summary
        1.  
          Understanding IBM Enterprise Storage Capacity Calculations
      89.  
        IBM Array Summary
      90. IBM Array Detail
        1.  
          IBM Storage System Summary
        2.  
          Raw Capacity
        3.  
          Array Site Capacity
        4.  
          Raw Array Capacity
        5.  
          Rank Capacity
        6.  
          Extent Pool Capacity
        7.  
          Logical Volumes
        8.  
          Top 3 of n Ranks
        9.  
          Top 3 of n Extent Pools
        10.  
          IBM Storage System Capacity Detail
        11.  
          IBM Storage System FB Volumes
        12.  
          Capacity and Object Usage Forecast
      91.  
        IBM Extent Pool Summary
      92.  
        IBM Rank Summary
      93.  
        IBM Disk Summary
      94.  
        IBM SAN Volume Controller Overview
      95.  
        Space-efficient VDisks
      96.  
        IBM SVC VDisk Summary
      97.  
        IBM SVC MDisk Groups
      98.  
        IBM SVC MDisk Group Details
      99.  
        IBM SVC MDisk Summary
      100.  
        How Capacity Values are Represented in XIV Reports
      101.  
        IBM XIV Consistency Groups Summary
      102.  
        IBM XIV Consistency Group Detail
      103.  
        XIV Physical Disks
      104.  
        XIV Snapshot Details
      105.  
        IBM XIV Storage Pools Summary
      106.  
        IBM XIV Storage Pool Details
      107. LUN Utilization Summary
        1.  
          Estimated LUN Usage/Availability
      108.  
        LUN Utilization Summary for EMC VPLEX Arrays
      109.  
        LUN Utilization Summary for IBM XIV Arrays
      110.  
        LUN Utilization Summary for NetApp 7-Mode
      111.  
        LUN Utilization Summary for NetApp Cluster-Mode
      112.  
        LUN Utilization Summary for Hitachi Vantara
      113.  
        LUN Utilization Summary for HP3PAR
      114.  
        Array Group Details
      115.  
        EMC CLARiiON Storage Array Group Specifics
      116.  
        Microsoft Azure Endpoint Summary
      117.  
        Microsoft Azure Storage Account Summary
      118.  
        NetApp Aggregate Summary
      119.  
        NetApp Cluster-Mode Aggregate Summary
      120. NetApp Aggregate Detail
        1.  
          Aggregate Capacity Usage
      121. NetApp Cluster-Mode Aggregate Detail
        1.  
          Aggregate Capacity Usage
      122. NetApp Plex Details
        1.  
          RAID Reconstruction Status
        2.  
          Plex Disk Pool Details
      123.  
        NetApp CIFS Summary
      124.  
        NetApp Cluster-Mode CIFS Summary
      125.  
        NetApp Disk Summary
      126.  
        NetApp Cluster-Mode Disk Summary
      127.  
        NetApp Cluster-Mode FC Array Port Utilization
      128.  
        NetApp NFS Summary
      129.  
        NetApp Cluster-Mode NFS Summary
      130.  
        NetApp Cluster-Mode Node Summary
      131.  
        NetApp QTree Summary
      132.  
        NetApp Cluster-Mode QTree Summary
      133.  
        NetApp Snapshot Summary
      134.  
        NetApp Cluster-Mode Snapshot Summary
      135.  
        NetApp Volume Summary
      136.  
        NetApp Cluster-Mode Volume Summary
      137. NetApp Volume Details
        1.  
          Volume Summary Status
        2.  
          Quota Status
        3.  
          Snapshot Schedule Details
        4.  
          Quota Details
      138. NetApp Cluster-Mode Volume Detail
        1.  
          Quota Status
        2.  
          Quota Details
        3.  
          Snapshot Schedule Interval Details
        4.  
          Snapshot Schedule Cron Details
      139.  
        NetApp Cluster-Mode Summary
      140.  
        NetApp Cluster-Mode Thin Provisioning Summary
      141.  
        NetApp Cluster-Mode Vserver Summary
      142.  
        NetApp StorageGrid Active Alerts Summary
      143.  
        NetApp StorageGrid Node Summary
      144.  
        NetApp StorageGrid Site Summary
      145. NetApp StorageGrid Tenant Summary
        1.  
          NetApp StorageGrid Users Summary
        2.  
          NetApp StorageGrid Buckets Summary
      146.  
        OpenStack Swift Container Summary
      147.  
        OpenStack Swift Policy Summary
      148.  
        OpenStack Swift Storage Utilization by Account
      149.  
        OpenStack Swift Storage Utilization by Zone
      150.  
        OpenStack Swift Storage Device Summary
      151.  
        OpenStack Swift Storage Utilization by Node
    9. Available/Reclaimable Capacity Reports
      1.  
        Allocated but Undiscovered LUNs
      2.  
        Allocated but Unused LUNs
      3.  
        Array Utilization Dashboard
      4.  
        Array Utilization Summary
      5.  
        Reclamation Summary
      6.  
        Reclaimable Space by Host Group
      7.  
        Reclaimable Space by Host Group Details
      8.  
        Reclaimable Space by Host
      9.  
        LUNS Added to Volume Group but Unused
      10.  
        Suspected De-provisioned Hosts
      11.  
        Unallocated LUNs
      12.  
        Unused Disks/Volume Groups
      13.  
        Unused Partitions/Logical Volumes
    10. Capacity at Risk Reports
      1. Exception Summary
        1.  
          Exception Summary Report Details
      2.  
        Hosts at Risk
      3.  
        LUNs at Risk
      4.  
        NetApp Aggregates at Risk
      5.  
        NetApp Cluster-Mode Aggregates at Risk
      6.  
        NetApp Volumes at Risk
      7.  
        NetApp Cluster-Mode Volumes at Risk
      8.  
        Over-Provisioned Hosts
      9.  
        Over-Provisioned LUNs
    11. Capacity Chargeback Reports
      1.  
        Aggregated Chargeback
      2.  
        Aggregated Chargeback by Host Groups
      3.  
        Aggregated Chargeback by Attribute
      4.  
        Chargeback Detail
      5.  
        Chargeback Array Capacity
      6.  
        Chargeback By Host
      7.  
        Chargeback by LUN Detail
      8.  
        Chargeback Policy Capacity
      9.  
        Policy Detail
      10.  
        Object Store Chargeback
      11.  
        Object Store Chargeback Detail
    12. Host Capacity Utilization Reports
      1.  
        Host Capacity & Utilization
      2. Host Utilization Detail
        1.  
          Host Details
        2.  
          Host Details by Source
        3.  
          Host Capacity Detail Report
        4.  
          Network Attached Storage Shares
        5.  
          Allocated and Unused LUNs
        6.  
          Disks Details
        7.  
          Disk Partitions/Volume Group Details
        8.  
          Host Groups
      3.  
        Host Utilization Detail (ASM Example)
      4.  
        Veritas Volume Details
      5.  
        Host Executive Summary
      6.  
        Host HBA Summary
    13. SnapMirror Reports
      1.  
        SnapMirror Summary
      2.  
        SnapMirror Details
      3.  
        SnapMirror Schedule
      4.  
        SnapMirror Status Summary
      5.  
        SnapMirror Data Transfer
      6.  
        SnapMirror Volumes/QTrees At Risk
      7.  
        SnapMirror Data Protection Dashboard
    14. SnapVault Reports
      1.  
        SnapVault Relationship Summary
      2.  
        SnapVault Secondary Configuration
      3.  
        SnapVault Summary
      4. SnapVault Detail
        1.  
          Schedule Report (Primary and Secondary)
      5.  
        SnapVault Schedule
      6.  
        SnapVault Status
      7.  
        SnapVault Data Transfer
      8.  
        SnapVault Relationship Summary
      9.  
        SnapVault Data Protection Dashboard
      10.  
        SnapVault QTrees at Risk
    15. Capacity Forecasting Reports
      1.  
        Array Capacity Forecast
      2.  
        Data Domain Filesystem Capacity & Forecast
      3.  
        Data Domain Filesystem Status
      4.  
        EMC Symmetrix Thin Pool Capacity Forecast
      5.  
        EMC VNX (CLARiiON) Thin Pool Capacity Forecast
      6.  
        Object Store Usage Over Time
      7.  
        Hitachi NAS Storage Pool Capacity Over Time
      8.  
        Host Capacity Forecast
      9.  
        Host Volume Growth and Forecast
      10.  
        Host Storage Usage Over Time
      11.  
        Storage Capacity Over Time
      12.  
        IBM COS Storage Pool Growth and Forecast
      13.  
        IBM COS Vault Growth and Forecast
      14.  
        IBM COS Vault Summary Growth and Usage
      15.  
        IBM COS Site Summary
      16.  
        IBM COS Device Summary
      17.  
        IBM COS Mirror Summary
    16. Storage Performance Reports
      1.  
        Performance Profiles Overview
      2.  
        EMC Isilon Metrics
      3.  
        NetApp Cluster-Mode Metrics
      4.  
        EMC Symmetrix Enhanced Performance Metrics
      5.  
        Determining Performance States
      6.  
        Populating Performance States
      7.  
        Updating Performance Profiles
      8.  
        Community Performance Profiling
      9.  
        Configure Community Performance Profiling
      10.  
        Aggregated Profiles
      11.  
        Array Performance by RAID Group
      12.  
        Array Performance by LUN
      13.  
        LUN Performance
      14.  
        LUN Details
      15.  
        Data Domain Disk Performance
      16.  
        Data Domain System Performance
      17.  
        EMC Isilon CPU Performance by Cluster
      18.  
        EMC Isilon CPU Performance by Node
      19.  
        EMC Isilon Disk Performance by Cluster
      20.  
        EMC Isilon Disk Performance by Node
      21.  
        EMC Isilon File System Performance by Protocol
      22.  
        EMC Symmetrix Array Performance
      23.  
        EMC Symmetrix Device Group Performance
      24.  
        EMC Symmetrix Disk Performance
      25.  
        EMC Symmetrix FE Director Performance
      26.  
        EMC Symmetrix Storage Group Performance
      27.  
        EMC Symmetrix Thin Tier Performance
      28.  
        EMC VNX (Celerra) Data Mover Performance
      29.  
        Host Load Average
      30.  
        Host CPU Utilization
      31.  
        Host Memory Utilization
      32.  
        Host Memory Swap
      33.  
        Host Disk reads/writes
      34.  
        Host Network Packets sent/received
      35.  
        LUN Performance
      36. Mission Control for Performance Analysis
        1.  
          Vendor-Specific Considerations for Array Performance Metrics
      37.  
        NetApp Cluster-Mode Aggregate Performance by Cluster
      38.  
        NetApp Cluster-Mode Aggregate Performance by Node
      39.  
        NetApp Cluster-Mode CIFS Performance by Cluster
      40.  
        NetApp Cluster-Mode CIFS Performance by Vserver
      41.  
        NetApp Cluster-Mode Disk Performance by Cluster
      42.  
        NetApp Cluster-Mode Disk Performance by Node
      43.  
        NetApp Cluster-Mode NFS Performance by Cluster
      44.  
        NetApp Cluster-Mode NFS Performance by Vserver
      45.  
        NetApp Cluster-Mode Volume Performance by Cluster
      46.  
        NetApp Cluster-Mode Volume Performance by Vserver
      47.  
        NetApp Cluster-Mode Performance by Cluster
      48.  
        NetApp Cluster-Mode Performance by Node
      49.  
        Performance Profiles
      50.  
        Port Throughput by Array
    17. Thin Provisioning Reports
      1.  
        Thin Provisioning Overview
      2.  
        EMC Symmetrix Compression Ratio Summary
      3.  
        EMC Symmetrix SRP Summary
      4.  
        EMC Symmetrix Thin Pool Summary
      5.  
        EMC Symmetrix Thin Pool Detail
      6.  
        EMC VNX (CLARiiON) Thin Pool Summary
      7.  
        EMC VNX (CLARiiON) Thin Pool Details
      8.  
        Hitachi Disk Summary
      9.  
        Hitachi Dynamic Provisioning Pool Summary
      10. Hitachi Dynamic Provisioning Pool Utilization
        1.  
          Reclaimable Storage
      11.  
        HP 3PAR Common Provisioning Group (CPG) Summary
      12.  
        HP 3PAR Common Provisioning Group (CPG) Detail
      13.  
        Storage Pool Summary
    18. File Analytics Reports
      1.  
        File Analytics Overview
      2.  
        Capacity Report
      3.  
        Capacity Forecast
      4.  
        Capacity Forecast by Device
      5.  
        Capacity Forecast by Volume/Share
      6.  
        Host Summary
      7.  
        Top Candidates for Duplicates
      8.  
        Volume Summary Report
      9.  
        Share Summary Report
      10.  
        New Files Added
      11.  
        Usage by Owner
      12.  
        Usage by Owner Forecast
      13.  
        Usage by Owner Forecast Details
      14.  
        Duplicate Files (top 50 in each device)
      15.  
        Deduplication Candidates
      16.  
        File Categories
      17.  
        File Sizes
      18.  
        File Types
      19.  
        Largest Files
      20.  
        Non-organizational Files
      21.  
        Ransomware File Types
      22.  
        File List Preview
      23.  
        Access Dates
      24.  
        Create Dates
      25.  
        Modified Dates
    19. Virtualization Manager Reports
      1.  
        Virtualization Manager Reports
      2.  
        Virtualization Terminology
      3.  
        Overview of Replication Manager
      4. Understanding the Datastore
        1.  
          Datastore Characteristics
      5.  
        Using Virtualization Manager for Planning and Monitoring
      6.  
        AWS EC2 Instance Summary
      7.  
        VM Cluster Summary
      8.  
        VM Files Summary
      9.  
        Data Collection Options and VM Files Summary
      10.  
        VM Server Summary
      11. VM Server Detail
        1.  
          VM Server Detail Data
        2.  
          VM Tags and Custom Attribute Details
        3.  
          Performance & Forecast
        4.  
          Largest VMs
        5.  
          Datastores
        6.  
          Disks
        7.  
          Host Details by Source
        8.  
          Data Collection Options and VM Server Detail
      12.  
        Microsoft Hyper-V Server Summary
      13. VM Snapshot Summary
        1.  
          Data Collection Options and VM Snapshot Summary
      14.  
        VM Storage Mapping Summary
      15.  
        VM Summary
      16. VM Detail
        1.  
          VM Detail
        2.  
          VM Tags and Custom Attribute Details
        3.  
          Performance Over Time
        4.  
          VM Size Over Time
        5.  
          Volumes
        6.  
          Disks
        7.  
          VM Files
        8.  
          Snapshots
        9.  
          Host Details by Source
      17.  
        Microsoft Hyper-V VM Summary
      18.  
        VM Detail (Hyper-V)
      19.  
        VMs Over Time
      20.  
        Logical Disk Utilization
      21.  
        Datastore Usage Breakdown
      22.  
        VM Datastore Overview
      23.  
        Datastore Usage History and Performance
      24.  
        Datastore Usage History
      25.  
        Datastore Disk Read/Write Performance
      26.  
        Datastore Disk Latency Performance
      27. Datastore Utilization Summary
        1.  
          Data Collection Options and Datastore Utilization
      28. Datastore Detail
        1.  
          Datastore Detail: Datastore Usage Breakdown
        2.  
          Datastore Capacity & Forecast
        3.  
          Extents
        4.  
          Shared VM Servers
        5.  
          VM Utilization
        6.  
          Data Collection Options and Datastore Details
      29.  
        Physical Disk Utilization
      30.  
        Physical Disk Detail
      31.  
        Datastore Performance Summary
      32.  
        Physical Disk Performance Over Time
      33.  
        Physical Disk Performance Summary
      34.  
        VM Guest to LUN Performance
      35.  
        VM Performance Over Time
      36.  
        VM Performance Summary
      37.  
        Datastore Capacity Forecast
      38.  
        VM Size Forecast
    20. Fabric Manager Reports
      1. Host to Storage Dashboard
        1.  
          Working with Topology
      2.  
        Paths Portlet
      3.  
        Paths in the Host to Array Connectivity Portlet
      4.  
        Zones in the Host to Array Connectivity Portlet
      5.  
        Port Summary
      6.  
        Port Details
      7.  
        SAN Fabric Summary
      8.  
        SAN Fabric Details
      9.  
        Switch Summary
      10.  
        Switch Details
      11.  
        Node Port Summary
      12.  
        Zone Summary
      13.  
        Zone Details
      14.  
        Zone Set Summary
      15.  
        Zone Members
      16.  
        Bottom Ranking
      17.  
        Port Distribution
      18.  
        SAN Resource Utilization
      19.  
        Top Ranking
      20.  
        SAN Fabric Change Status Summary
      21.  
        SAN Fabric Change Summary
      22.  
        Port Performance Dashboard
      23.  
        Ports Portlet
      24.  
        Port Details Portlet
      25.  
        Port Performance Summary
      26.  
        Port Performance Details
      27.  
        SAN Fabric Usage
      28.  
        Port Error Rate Forecast
      29.  
        Port Utilization Forecast
    21. Backup Manager Management Reports
      1.  
        Using Backup Manager Reports for Analysis
      2.  
        Anomalies Summary
      3.  
        Backup Executive Summary
      4.  
        Backup Server Performance Dashboard
      5.  
        Failed Backup Sources
      6.  
        Consecutive Errors
      7.  
        Data Domain Backup Summary
      8.  
        Data Domain File Compression Detail
      9.  
        Data Domain File Compression Summary
      10. Error Log Summary
        1.  
          Error Log Summary
        2.  
          By Policy
        3.  
          By Server
      11.  
        HP Data Protector Session Summary
      12.  
        HP Data Protector Session Details
      13. Job Duration Report
        1.  
          To diagnose excessive backup durations:
      14.  
        Job Duration by Source
      15.  
        Job Error Code
      16.  
        Job Status Summary
      17.  
        Job Summary Report
      18.  
        Job Summary - Heterogeneous Backup Products
      19.  
        Job Throughput by Client
      20.  
        Avamar Job Summary Report (Homogeneous)
      21.  
        Backup Exec Job Summary Report (Homogeneous)
      22.  
        Cohesity Data Protect Job Summary Report (Homogeneous)
      23.  
        Commvault Simpana Job Summary Report (Homogeneous)
      24.  
        Commvault Simpana ESX Backup Summary
      25.  
        HP Data Protector Job Summary Report (Homogeneous)
      26.  
        IBM Spectrum Protect (TSM) Job Summary Report (Homogeneous)
      27.  
        NetBackup Job Summary Report (Homogeneous)
      28.  
        NetWorker Job Summary Report (Homogeneous)
      29.  
        Oracle Recovery Manager (RMAN) Job Summary Report (Homogeneous)
      30. Veeam Backup & Replication Job Summary Report (Homogeneous)
        1.  
          Job Summary Advanced Options
      31.  
        Job Details Report
      32.  
        Avamar Job Details
      33.  
        Commvault Simpana Job Details
      34.  
        IBM Spectrum Protect (TSM) Job Details Report
      35. Veeam and RMAN Job Details Report
        1.  
          Related Jobs
        2.  
          Fragments
        3.  
          Backup Items
        4.  
          Job Messages
      36. Adding a Note to a Job
        1.  
          To add a note to a job
      37.  
        Job Summary by Server
      38.  
        Job Summary by Source
      39.  
        Job Type Count
      40. Job Volume Summary Report
        1.  
          Use this procedure to analyze volume usage trends:
      41.  
        Largest Backup Volume
      42.  
        Master Server Job Throughput
      43.  
        Monthly Backup Summary
      44.  
        NetBackup AIR-Replication Import Jobs
      45. NetBackup deduplication to MSDP savings
        1.  
          NetBackup Deduplication to MSDP Savings Dashboard
        2.  
          NetBackup Deduplication to MSDP Savings - By Master Servers
        3.  
          NetBackup Deduplication to MSDP Savings - By Clients
        4.  
          NetBackup Deduplication to MSDP Savings Trend Over Time
        5.  
          NetBackup Deduplication to MSDP Savings - By Policy Type
      46.  
        NetBackup Media Server Job Throughput
      47.  
        NetBackup SLP Status
      48.  
        NetBackup SLP Details
      49.  
        NetBackup SLP Status by Destination (AIR Activity)
      50.  
        NetBackup SLP Status by Client
      51.  
        NetBackup SLP Status by Image Copy
      52.  
        NetBackup SLP Status by Image
      53.  
        NetBackup SLP Status by SLP
      54.  
        Running and Queued Job Summary
      55.  
        NetBackup Running and Queued Jobs Summary
      56.  
        NetWorker Running and Queued Jobs Summary
    22. Backup Administration Reports
      1.  
        Backup RTO RPO Compliance
      2.  
        Avamar Grid Capacity Dashboard
      3.  
        Client Protection Summary
      4.  
        Command Center Dashboard
      5.  
        Data Protection Dashboard
      6. Host Details
        1.  
          Host Aliases
        2.  
          Edit Host Details
        3.  
          Host Details by Source
      7.  
        Host Group
      8. IBM Spectrum Protect (TSM) Storage Pools Dashboard
        1.  
          Storage Pool Capacity
        2.  
          Storage Pool Attributes
        3.  
          Storage Pool Utilization
        4.  
          Tape Occupancy Summary
        5.  
          Tape Media Summary
        6.  
          Storage Pool Process History
      9.  
        Job Histogram
      10.  
        Job Throughput Histogram
      11.  
        Job Activity Histogram
      12.  
        Message of the Day Report
      13.  
        Mission Control - Backup
      14.  
        NetBackup License Report
      15.  
        NetBackup Host Certificates
      16.  
        NetBackup Non-Host Certificates
      17.  
        Object Details
      18.  
        Operations Dashboard
      19.  
        Tailoring the Report Output by Backup Product
      20.  
        TSM Process Summary
    23. Backup Media Management Reports
      1.  
        Current Media Summary
      2.  
        Data Domain VTL Errors
      3.  
        Data Domain VTL Media Summary
      4.  
        Data Domain VTL Performance
      5.  
        Tape Media Summary Report
      6.  
        Tape Media Detail Report
      7.  
        Commvault Simpana Tape Media Detail
      8.  
        HP Data Protector Tape Media Table
      9.  
        NetBackup Tape Media Table
      10.  
        NetWorker Tape Media Table
      11.  
        TSM Tape Media Detail
      12. TSM Tape Media Detail Table
        1.  
          Estimated Capacity Notes
    24. Backup Service Level Agreement (SLA) Reports
      1.  
        Available Service Level Agreement (SLA) Reports
      2.  
        Configure a Backup SLA Policy
      3.  
        Backup Start Time SLA
      4. Determining and Improving Backup Start Time Performance
        1.  
          To determine and improve backup start time performance
      5.  
        Backup Status SLA
      6.  
        Changing the Success Percentage
      7.  
        Backup Master Server Overview
      8. Determining and Improving Backup Success Performance
        1.  
          To determine and improve backup success performance
      9.  
        Backup Duration SLA
      10. Determining and Improving Backup Duration Performance
        1.  
          To determine and improve backup duration performance
      11.  
        SLA Job Summary
    25. Backup Storage Utilization Reports
      1.  
        Using Storage Utilization Reports
      2.  
        Data Domain System Summary - Backup
      3.  
        Data Domain System Details
      4.  
        Data Domain Disk Summary
      5.  
        Disk Usage and Performance Report
      6.  
        Drive Performance Summary Report
      7.  
        NetBackup Drive Performance Summary
      8.  
        Drive Performance Detail
      9.  
        Drive Utilization & Performance Report
      10.  
        NetBackup Deduplication Effect
      11.  
        NetBackup Deduplication Savings Trend
      12.  
        NetBackup Storage Unit Summary
      13.  
        NetBackup Storage Unit Usage
      14.  
        Real Time Library and Drive Status
      15.  
        Storage Unit Detail Report
      16.  
        Storage Unit Images
      17.  
        Storage Unit Event Details
      18.  
        Disk Volume Details
      19.  
        Tape Library and Drive Utilization
      20.  
        IBM Spectrum Protect (TSM) Database Utilization
      21.  
        IBM Spectrum Protect (TSM) Recovery Log Utilization
    26. Backup Manager Forecasting Reports
      1.  
        Forecasting Overview
      2.  
        NetBackup Library Capacity Forecast
      3.  
        Media Availability Forecast
      4.  
        Media Consumption Forecast
      5.  
        Media Usage Details
      6.  
        Scratch Pool Forecast Report
      7.  
        Tape Drive Usage and Forecast Report
    27. Backup Billing and Usage Reports
      1.  
        Available Billing and Usage Reports
      2. Determining Media Chargebacks
        1.  
          To determine chargebacks for a business unit or customer
      3. Determining Backup Chargebacks
        1.  
          To determine server consumption chargebacks
      4.  
        Billing and Chargeback Summary
      5.  
        NetBackup Front End Size by Duration and Workload
      6.  
        NetBackup Front End Size by Workload
      7.  
        Server Consumption Summary
    28. Backup Policies Reports
      1.  
        Commvault Simpana Policy Summary Report
      2.  
        Commvault Simpana Policy Backup Copy Details
      3.  
        EMC Avamar Groups
      4.  
        Avamar Server Detail
      5.  
        Avamar Group Detail
      6.  
        Clients for Group
      7.  
        Avamar Client Detail
      8.  
        Avamar Dataset Detail
      9.  
        Avamar Schedule Detail
      10.  
        Avamar Retention Policy Detail
      11.  
        EMC NetWorker Groups
      12.  
        Group Detail
      13.  
        Client Instance Detail
      14.  
        HP Data Protector Backup Specification Summary
      15. HP Data Protector Backup Specification Detail
        1.  
          Object's Latest Backup and Not Configured Filesystems
        2.  
          Not Configured Filesystems
        3.  
          Backup Specification Schedules
      16.  
        IBM Spectrum Protect (TSM) Policy Domains
      17.  
        Policy Domain Details
      18.  
        Veritas NetBackup Policy
      19.  
        Backup Policy Details
      20.  
        Known Limitation for HyperV Policy
      21.  
        Backup Volume by NetBackup Policy Type
      22.  
        Veritas Netbackup protection plan report
    29. Public Cloud Reports
      1.  
        About Public Cloud Reports
      2. AWS Reports
        1.  
          AWS Account Billing Detail
        2.  
          AWS Account Listing
        3.  
          AWS Billing Summary Over Time
        4.  
          AWS Product Summary
        5.  
          AWS S3 Bucket Summary
        6.  
          AWS EC2 Snapshot
        7.  
          AWS EC2 Snapshot Detail
        8.  
          AWS EC2 Instance Summary
      3. Microsoft Azure Reports
        1.  
          Microsoft Azure Virtual Machine Summary
        2.  
          Microsoft Azure Virtual Machine Detail
        3.  
          Microsoft Azure Billing Summary
        4.  
          Microsoft Azure Resource Group Summary
        5.  
          Microsoft Azure Subscription Summary
  5. Section V. NetBackup IT Analytics Exporter Installation and Configuration
    1. Introduction and Installation Overview
      1.  
        About NetBackup IT Analytics Exporter
      2.  
        Prerequisites for exporter installation
      3.  
        Installation overview and ISO form factor
    2. Install and manage the exporter on a Linux host
      1.  
        Install the exporter on a Linux host using ISO
      2.  
        Install the exporter on Linux host using response file
      3.  
        Install the exporter on Linux host using RPM
      4.  
        Exporter service management on Linux
      5.  
        Upgrade or reinstall the exporter
    3. Install and manage the exporter on a Windows host
      1.  
        Install the exporter on Windows host
      2.  
        Install the exporter on Windows host using response file
      3.  
        Exporter service management on Windows
      4.  
        ISO-based upgrade on Windows host
    4. Configure the NetBackup IT Analytics Exporter
      1.  
        Configure the NetBackup exporter
      2.  
        Configure Node exporter
      3.  
        Configure Process exporter
      4.  
        Configure Windows exporter
      5.  
        Configure Data Sender
    5. Appendix A.  Troubleshooting
      1.  
        Resolve NetBackup exporter issues
      2.  
        Resolve Node exporter issues
      3.  
        Resolve Process exporter issues
      4.  
        Resolve Windows exporter issues
      5.  
        Resolve Data Sender issues
      6.  
        Log locations
  6. Section VI. Data Collector Installation and Troubleshooting
    1. Installing the Data Collector Software
      1.  
        Introduction
      2.  
        Installing the WMI Proxy service (Windows host resources only)
      3.  
        Testing WMI connectivity
      4.  
        Considerations to install Data Collector on non-English systems
      5.  
        Install Data Collector Software on Windows
      6.  
        Install Data Collector software on Linux
      7.  
        Install Data Collector in containerized environment
    2. Validating Data Collection
      1.  
        Validation methods
      2.  
        Data Collectors: Vendor-Specific validation methods
      3. Working with on-demand Data Collection
        1.  
          View real-time logging during an on-demand collection
        2.  
          Generating debug level logs during an on-demand collection
        3.  
          Collect historic data on-demand
      4.  
        Using the CLI check install utility
      5.  
        List Data Collector configurations
    3. Uninstalling the Data Collector
      1.  
        Uninstall the Data Collector on Linux
      2.  
        Uninstall the Data Collector on Windows
    4. Manually Starting the Data Collector
      1.  
        Introduction
    5. Data Collector Troubleshooting
      1.  
        Verify the Data Collector configuration
      2.  
        Verify Connectivity
      3.  
        Configuring web proxy updates
      4.  
        Collecting missed events for Veritas Backup Exec
      5.  
        Substituting ODBC for JDBC to connect to SQL server for Veritas Backup Exec
      6.  
        Useful Data Collection scripts for capacity
      7.  
        Host resources troubleshooting
      8.  
        Host resources: Check the status of the WMI proxy server
      9.  
        Host resources: Post-Installation verification
      10. Host resources: Check host connectivity using standard SSH
        1.  
          Checking Paths for SSH
        2.  
          Environment setting for bash users
      11.  
        Host resources: Check host connectivity
      12.  
        Host resources: Check host connectivity using Host Resource Configuration file
      13. Host resources: Generating host resource configuration files
        1.  
          Sample lines in an input file
      14.  
        Host resources: Check the execution of a command on a remote server
      15.  
        Host resources Data Collection
      16.  
        Host resources: Collection in stand-alone mode
      17. Configuring parameters for SSH
        1.  
          Configure channelWaitTime
        2.  
          Configure singleChannelSession
        3.  
          Configure sudoWithPassword
      18.  
        Identifying Windows file system access errors (File Analytics)
      19.  
        Collect from remote shares (File Analytics)
      20.  
        Adding a certificate to the Java keystore
    6. CRON Expressions and Probe Schedules
      1.  
        CRON expressions and probe schedules
    7. Clustering Data Collectors with VCS and Veritas NetBackup (RHEL 7)
      1.  
        Clustering Data Collectors with VCS and Veritas NetBackup (RHEL 7)
      2.  
        Prerequisites
      3.  
        Getting started with Data Collector clustering
      4.  
        Main.cf
      5.  
        Upgrading a clustered Data Collector
    8. Clustering Data Collectors with VCS and Veritas NetBackup (Windows)
      1.  
        Clustering Data Collectors with VCS and Veritas NetBackup (Windows)
      2.  
        Prerequisites
      3.  
        Getting with Started with Data Collector Clustering
      4.  
        Main.cf
      5.  
        Upgrading a Clustered Data Collector
    9. Maintenance Scenarios for Message Relay Server Certificate Generation
      1.  
        Regenerate authentication certificate nearing expiry (or already expired)
      2.  
        Recover inadvertently deleted aptare.ks file
      3.  
        Authenticate new database with existing SSL certificates
      4.  
        SSL certificate authentication for a new data collector
  7. Section VII. Data Collection for the Cloud
    1. Pre-Installation Setup for Amazon Web Services (AWS)
      1.  
        Pre-Installation setup for Amazon Web services (AWS)
      2.  
        Prerequisites for adding Data Collectors (Amazon Web services)
      3.  
        Prerequisite Amazon Web services (AWS) configurations
      4.  
        Configure an S3 bucket to receive billing reports
      5.  
        Select cost allocation tags
      6. Create an AWS IAM user
        1.  
          Example of a custom AWS policy for NetBackup IT Analytics AWS collection
      7. Link AWS accounts for Collection of consolidated billing data
        1.  
          Create a role for NetBackup IT Analytics Data Collection
        2.  
          Add the role to the IAM user
      8.  
        Installation overview (Amazon Web Services - AWS)
      9.  
        Add an Amazon Web Services (AWS) policy
    2. Pre-Installation Setup for OpenStack Ceilometer
      1.  
        Pre-Installation setup for OpenStack Ceilometer
      2.  
        Prerequisites for adding Data Collectors (OpenStack Ceilometer)
      3.  
        Installation Overview (OpenStack Ceilometer)
      4.  
        Adding an OpenStack Ceilometer Data Collector policy
    3. Pre-Installation Setup for OpenStack Swift
      1.  
        Pre-Installation setup for OpenStack Swift
      2.  
        Installation overview (OpenStack Swift)
      3.  
        Adding an OpenStack Swift Data Collector policy
    4. Pre-Installation Setup for Microsoft Azure
      1.  
        Pre-Installation setup for Microsoft Azure
      2.  
        Setting up credentials for Microsoft Azure Data Collection
      3.  
        Install the Azure PowerShell client on a Windows computer
      4.  
        Find your tenant and subscription ID
      5.  
        Register a new application for the Data Collector
      6.  
        Create a principal and assign role to the application
      7.  
        Prerequisites for Adding Data Collectors (Microsoft Azure)
      8.  
        Installation overview (Microsoft Azure)
      9.  
        Add a Microsoft Azure Data Collector policy
    5. Google Cloud Platform (GCP)
      1.  
        Overview
      2.  
        Pre-installation setup for GCP
      3.  
        Prerequisites for adding Data Collectors (GCP)
      4.  
        Installation GCP
      5.  
        Adding policy
      6.  
        Testing the collection
      7.  
        Creating an IAM role
      8.  
        Billing Data Access Role
      9.  
        Cloud API
      10.  
        Project access
  8. Section VIII. Data Collection for Data Protection (Backup)
    1. Introduction
      1.  
        Overview
      2.  
        Backup Manager Collection of Backup and Restore Data
    2. Pre-Installation setup for Commvault Simpana
      1.  
        Introduction
      2.  
        Architecture overview (Commvault Simpana)
      3.  
        Prerequisites for adding Data Collectors (Commvault Simpana)
      4.  
        Upgrade troubleshooting: Microsoft SQL Server and Java 11
      5.  
        Installation overview (Commvault Simpana)
      6. Open TCP/IP access to the Commvault database
        1.  
          Additional Static Port Configuration Steps
      7. Set up a read-only user in the CommServe server
        1.  
          Option 1: Execute SQL commands in the CommServe database
        2.  
          Option 2: Use MSSQL Management Studio
      8.  
        Load historical data prior to initial data collection
      9.  
        Add Commvault Simpana servers
      10.  
        Add a Commvault Simpana Data Collector policy
    3. Pre-Installation setup for Cohesity DataProtect
      1.  
        Introduction
      2.  
        Prerequisites for adding Data Collectors (Cohesity DataProtect)
      3.  
        Installation overview (Cohesity DataProtect)
      4.  
        Add a Cohesity DataProtect Data Collector policy
    4. Pre-Installation setup for EMC Avamar
      1.  
        Introduction
      2.  
        Architecture overview (EMC Avamar)
      3.  
        Prerequisites for adding Data Collectors (EMC Avamar)
      4.  
        Installation overview (EMC Avamar)
      5.  
        Add EMC Avamar servers
      6.  
        Adding an EMC Avamar Data Collector policy
      7.  
        Testing the collection
      8.  
        Add/Configure an Avamar Server within the Data Collector policy window
      9. Import EMC Avamar server information
        1.  
          CSV Format Specifications
        2.  
          Import Notes
      10.  
        Export EMC Avamar server information
    5. Pre-Installation setup for EMC Data Domain Backup
      1.  
        Architecture overview (EMC Data Domain Backup)
      2.  
        Prerequisites for adding Data Collectors (EMC Data Domain Backup)
      3.  
        Installation overview (EMC data domain Backup)
      4.  
        Add EMC data domain servers
      5.  
        Add an EMC data domain backup Data Collector policy
      6.  
        Adding/Configuring an EMC data domain server within the Data Collector policy window
      7.  
        Configure a data domain server for file-level compression collection
    6. Pre-Installation setup for EMC NetWorker
      1.  
        Introduction
      2. Architecture overview (EMC NetWorker)
        1.  
          EMC NetWorker Terminology
      3.  
        Prerequisites for adding Data Collectors (EMC NetWorker)
      4.  
        Installation overview (EMC NetWorker)
      5.  
        Add EMC NetWorker servers
      6.  
        Adding an EMC NetWorker Data Collector policy
      7.  
        Adding/Editing a EMC NetWorker server within the Data Collector policy
      8.  
        Configure a notification action in EMC NetWorker
    7. Pre-Installation setup for Dell EMC NetWorker Backup & Recovery
      1.  
        Introduction
      2.  
        Prerequisites for adding data collectors (Dell EMC NetWorker Backup & Recovery)
      3.  
        Installation overview (Dell EMC Networker Backup & Recovery)
      4.  
        Adding a Dell EMC Networker Backup & Recovery Data Collector policy
    8. Pre-Installation setup for generic backup
      1.  
        Introduction
      2.  
        Generic backup data collection
      3.  
        Considerations
      4.  
        Prerequisites for adding Data Collectors (Generic Backup)
      5.  
        Installation overview (generic backup)
      6.  
        Add generic backup servers
      7.  
        Add a generic backup Data Collector policy
      8.  
        Adding/Editing a generic backup server within the Data Collector policy
      9.  
        Manually load the CSV file (generic backup)
      10. CSV format specification
        1.  
          EXAMPLE: genericBackupJobs.csv
    9. Pre-Installation setup for HP Data Protector
      1.  
        Introduction
      2. Architecture overview (HP Data Protector)
        1.  
          Cell Manager
        2.  
          Disk agent (backup agent)
        3.  
          Media agent
        4.  
          Client systems
        5.  
          User interface (UI)
      3.  
        Prerequisites for adding Data Collectors (HP Data Protector)
      4.  
        Installation overview (HP Data Protector)
      5.  
        Identify HP Data Protector collection requirements
      6.  
        Cell Manager commands for data collection
      7.  
        Preparing for centralized data collection on a remote Cell Manager
      8. Configure the Data Collector server in Cell Manager (HP Data Protector)
        1.  
          Requirements for the Data Collector (Windows)
        2.  
          Steps to Configure the Data Collector Server in Cell Manager
      9.  
        Configure an HP Data Protector admin user
      10.  
        Validate HP Data Protector setup
      11.  
        Add HP Cell Manager servers to NetBackup IT Analytics
      12.  
        Add an HP Data Protector Data Collector policy
      13.  
        Add/Edit a HP Data Protector server within the Data Collector policy
      14.  
        Tune the configuration
    10. Pre-Installation setup for IBM Spectrum Protect (TSM)
      1.  
        Introduction
      2. Architecture overview (IBM Spectrum Protect -TSM)
        1.  
          IBM Spectrum Protect (TSM) - servers and instances defined
      3.  
        Prerequisites for adding data collectors (IBM Spectrum Protect - TSM)
      4.  
        Installation overview (IBM Spectrum Protect - TSM)
      5.  
        Add IBM Spectrum Protect (TSM) servers
      6.  
        Adding an IBM Spectrum Protect (TSM) Data Collector policy
      7.  
        Add/Configure an IBM Spectrum Protect (TSM) server within the Data Collector policy
      8. Import IBM Spectrum Protect (TSM) information
        1.  
          CSV format specifications
      9.  
        Export IBM Spectrum Protect (TSM) server information
    11. Pre-Installation setup for IBM Spectrum Protect Plus
      1.  
        Introduction
      2.  
        Prerequisites for adding Data Collectors (IBM Spectrum Protect Plus)
      3.  
        Add IBM Spectrum Protect Plus Data Collector policy
    12. Pre-Installation setup for NAKIVO Backup & Replication
      1.  
        Introduction
      2.  
        Prerequisites for adding data collectors (NAKIVO Backup & Replication)
      3.  
        Installation overview (NAKIVO Backup & Replication)
      4.  
        Add a NAKIVO Backup & Replication Data Collector policy
    13. Pre-Installation setup for Veritas Backup Exec
      1.  
        Introduction
      2.  
        Architecture overview (Veritas Backup Exec)
      3.  
        Backup Exec terminology
      4.  
        Prerequisites for adding data collectors (Veritas Backup Exec)
      5.  
        Upgrade troubleshooting: Microsoft SQL Server and Java 10
      6.  
        Installation overview (Veritas Backup Exec)
      7.  
        Enable TCP/IP for the SQL server
      8.  
        Configure a Windows user
      9.  
        Add Veritas Backup Exec servers
      10.  
        Importing Backup Exec Server information
      11.  
        Add a Veritas Backup Exec Data Collector policy
    14. Pre-Installation setup for Veritas NetBackup
      1.  
        Introduction
      2.  
        General prerequisites for adding data collectors (Veritas NetBackup)
      3.  
        Centralized or distributed deployment (Veritas NetBackup)
      4.  
        Centralized NetBackup data collection (Recommended)
      5. Prerequisites to use SSH and WMI (Veritas NetBackup)
        1.  
          Configure NetBackup Access Control (NBAC) for NetBackup Data Collection
        2.  
          Configure NetBackup sudo access for NetBackup data collection
        3.  
          Configure NetBackup Appliances for Data Collection
        4.  
          Configure NetBackup Flex Appliances for Data Collection
        5.  
          Veritas NetBackup SSH: Changing the Linux Temporary Directory for Collection
      6. Prerequisites for NetBackup collection over SSH (Kerberos option)
        1.  
          Enable Kerberos authentication for NetBackup SSH collection
      7.  
        Prerequisites for centralized NetBackup data collection (using NetBackup software)
      8.  
        Prerequisites for collection from Veritas NetBackup deployed as a Docker image
      9. Veritas NetBackup 8.1 (or later) requirements for centralized collection
        1.  
          Required software
        2.  
          Overview of centralized Data Collector steps
        3.  
          Verify remote commands for centralized NetBackup data collection
      10.  
        Distributed NetBackup data collection
      11.  
        Enable access to the Veritas NetBackup Master Server
      12.  
        Before you install the Data Collector (Veritas NetBackup)
      13.  
        Collecting from NetBackup clusters
      14.  
        Clustered NetBackup upgrade procedure
      15.  
        Add a Veritas NetBackup Data Collector policy
      16.  
        Add/Edit NetBackup Master Servers within the Data Collector policy
      17. Configuring file analytics in NetBackup Data Collector policy
        1.  
          Prerequisites to configure File Analytics for NetBackup
        2.  
          Data Collector and Portal sizing guidelines for File Analytics
        3.  
          Configure File Analytics
        4.  
          Export File Analytics data
    15. Pre-Installation setup for Veritas SaaS backup
      1.  
        Introduction
      2.  
        Prerequisites for adding data collectors (Veritas SaaS Backup)
      3.  
        Installation overview (Veritas SaaS Backup)
      4.  
        Add a Veritas SaaS backup Data Collector policy
    16. Pre-Installation setup for Oracle Recovery Manager (RMAN)
      1.  
        Introduction
      2.  
        Prerequisites for adding data collectors (Oracle Recovery Manager - RMAN)
      3.  
        Installation overview (Oracle Recovery Manager - RMAN)
      4.  
        Add an Oracle Recovery Manager (RMAN) Data Collector policy
    17. Pre-Installation setup for Rubrik Cloud Data Management
      1.  
        Introduction
      2.  
        Prerequisites for adding Data Collectors (Rubrik Cloud Data Management)
      3.  
        Installation overview (Rubrik Cloud Data Management)
      4.  
        Add a Rubrik Cloud Data Management Data Collector policy
    18. Pre-Installation setup for Veeam Backup & Replication
      1.  
        Introduction
      2.  
        Prerequisites for adding data collectors (Veeam Backup & Replication)
      3.  
        Verifying Data Collector servers can connect to Veeam servers
      4.  
        Known issues and limitations (Veeam Backup & Replication)
      5.  
        Installation overview (Veeam Backup & Replication)
      6.  
        Add a Veeam Backup & Replication Data Collector policy
    19. Discovery policies for Veritas NetBackup
      1.  
        Task overview: Configure and monitor discovery policies
      2.  
        Discovery policies overview
      3. About Discovery types
        1.  
          Client drive discovery
        2.  
          Media server disk discovery
        3.  
          Backup policy coverage
      4.  
        Activate a Discovery license
      5.  
        Exclude devices from Discovery policies
      6.  
        Activate Discovery probes in the NetBackup Data Collector policy
      7.  
        Monitor Discovery processes
      8.  
        View client protection status
      9.  
        Reset Discovery data
      10.  
        Why enable SNMP?
      11. About SNMP probes
        1.  
          First probe (sysObjectOID)
        2.  
          Second probe (sysDescr OID)
      12.  
        Example--Installing Net-SNMP
      13.  
        Troubleshoot Net-SNMP installations
    20. Appendix B. Load Historic Events
      1.  
        Introduction
      2.  
        Load Commvault Simpana events
      3.  
        Load EMC Avamar events
      4.  
        Load EMC NetWorker events
      5.  
        Load HP Data Protector events
      6.  
        Load IBM Spectrum Protect (TSM) events
      7.  
        Load Oracle Recovery Manager (RMAN) events
      8.  
        Load Veeam Backup & Replication events
      9. Load Veritas NetBackup events
        1.  
          Load events for individual NetBackup clients
        2.  
          Load events for a group of NetBackup clients
      10.  
        Load Veritas Backup Exec events
      11.  
        Corrections in duplication of clients
      12.  
        Cohesity
      13.  
        Dell EMC NetWorker Backup & Recovery
  9. Section IX. Data Collection for Fabrics
    1. Fabric Manager Data Collection Overview
      1.  
        Introduction
      2.  
        Fabric Manager: Collection of SAN switch data
      3.  
        Switch zone alias collection
    2. Pre-Installation Setup for Brocade Switch
      1.  
        Pre-Installation setup for Brocade switch
      2.  
        Prerequisites for adding Data Collectors (Brocade switch)
      3.  
        Supported switches
      4.  
        Brocade switches: Default ports and firewall considerations
      5.  
        Installation overview (Brocade switch)
      6.  
        Brocade switch Data Collector policy
    3. Pre-Installation Setup for Cisco Switch
      1.  
        Pre-Installation setup for Cisco switch
      2.  
        Prerequisites for adding Data Collectors (Cisco switch)
      3.  
        Cisco switches: Default ports and firewall considerations
      4.  
        Installation overview (Cisco switch)
      5.  
        Cisco switch Data Collection policy
      6.  
        Before you start Cisco switch Data Collection
    4. Pre-Installation Setup for Brocade Zone Alias
      1.  
        Pre-Installation setup for Brocade zone alias
      2.  
        Prerequisites for adding Data Collectors (Brocade zone alias)
      3.  
        Brocade switches: Default ports and firewall considerations
      4.  
        Installation overview (Brocade zone alias)
      5.  
        Brocade zone alias Data Collector policy
    5. Pre-Installation Setup Cisco Zone Alias
      1.  
        Pre-Installation setup Cisco zone alias
      2.  
        Prerequisites for adding Data Collectors (Cisco zone alias)
      3.  
        Cisco switches: Default ports and firewall considerations
      4.  
        Installation overview (Cisco Zone Alias)
      5.  
        Cisco zone alias Data Collector policy
  10. Section X. Data Collection for File Analytics
    1. Pre-Installation Setup for File Analytics
      1.  
        Pre-Installation setup for File Analytics
      2.  
        File Analytics Data Collection overview
      3.  
        File Analytics Data Collection architecture
      4.  
        File Analytics Data Collector policies
      5.  
        Prerequisites for adding Data Collectors (File Analytics)
      6.  
        CIFS shares
      7. Host Discovery and Collection File Analytics probe
        1.  
          File Analytics Probe Configurations by operating system
        2.  
          Both Windows and Linux servers
        3.  
          Best practices for host Inventory File Analytics probes
      8. Adding a File Analytics Data Collector policy
        1.  
          Importing the CIFS share configuration
      9.  
        Set up FIPS compliant Data Collector for File Analytics
    2. File Analytics Export Folder Size and Folder Depth
      1.  
        Extracting File Analytics export folder size
      2.  
        Specifying the File Analytics folder depth
  11. Section XI. Data Collection for Replication
    1. Pre-Installation Setup for NetApp (Replication)
      1.  
        Overview
      2.  
        Prerequisites for adding Data Collectors (NetApp for replication)
      3. Before you install the NetApp (Replication) Data Collector
        1.  
          Creating a NetApp user with API privileges
      4.  
        Installation overview (NetApp for replication)
      5.  
        Adding an NetApp Data Collector policy
  12. Section XII. Data Collection for Storage (Capacity)
    1. Data Collection for Capacity Overview
      1.  
        Purpose of this document
      2.  
        Architecture overview
      3.  
        Determining the required policy
      4.  
        Planning worksheets
      5.  
        Storage array details
      6.  
        Host resources details
    2. Pre-Installation setup for Compute Resources
      1.  
        Overview
      2.  
        Prerequisites for adding Data Collectors - Compute Resources
      3.  
        Installation overview
      4.  
        Add a Compute Resources policy
    3. Pre-Installation Setup for Dell Compellent
      1.  
        Overview
      2.  
        Prerequisites for adding Data Collectors (Dell compellent)
      3.  
        Upgrade troubleshooting: Microsoft SQL Server and Java 11
      4.  
        Installation overview (Dell compellent)
      5.  
        Adding a Dell Compellent Data Collector policy
    4. Pre-Installation Setup for DELL EMC Elastic Cloud Storage (ECS)
      1.  
        Pre-Installation setup for DELL EMC Elastic Cloud Storage (ECS)
      2.  
        Prerequisites for adding Data Collectors - DELL EMC Elastic Cloud Storage (ECS)
      3.  
        Installation overview - DELL EMC Elastic Cloud Storage (ECS)
      4.  
        Add a DELL EMC Elastic Cloud Storage (ECS) Data Collector policy
    5. Pre-Installation Setup for EMC Data Domain Storage
      1.  
        Architecture overview (EMC data domain storage)
      2.  
        Prerequisites for adding data Collectors (EMC data domain storage)
      3.  
        Installation overview (EMC data domain storage)
      4.  
        Add EMC data domain servers
      5.  
        Adding an EMC data domain storage Data Collector policy
    6. Pre-Installation Setup for EMC Isilon
      1.  
        Pre-Installation setup for EMC Isilon
      2.  
        Prerequisites for adding Data Collectors (EMC Isilon)
      3.  
        Configure the Isilon SNMP service
      4. Configure Isilon sudo access
        1.  
          Modify the Sudo configuration
      5.  
        Installation overview (EMC Isilon)
      6.  
        Adding an EMC Isilon Data Collector policy
    7. Pre-Installation Setup EMC Symmetrix
      1.  
        Pre-Installation setup EMC Symmetrix
      2.  
        Prerequisites for adding Data Collectors (EMC Symmetrix)
      3.  
        Installation overview (EMC Symmetrix)
      4. Adding an EMC Symmetrix Data Collector policy
        1.  
          If the EMC solutions enabler is on a remote server (Recommended)
    8. Pre-Installation Setup for Dell EMC Unity
      1.  
        Pre-Installation setup for Dell EMC Unity
      2.  
        Prerequisites for adding Data Collectors (Dell EMC Unity)
      3.  
        Installation overview (Dell EMC Unity)
      4.  
        Add a Dell EMC Unity Data Collector policy
    9. Pre-Installation Setup for EMC VNX Celerra
      1.  
        Pre-Installation setup for EMC VNX Celerra
      2.  
        Prerequisites for adding Data Collectors (EMC VNX Celerra)
      3.  
        Setup for EMC VNX Celerra arrays
      4.  
        Configure a Read-Only user with an Operator role
      5.  
        Start the XML API server
      6.  
        Installation overview (EMC VNX Celerra)
      7.  
        Adding an EMC VNX Celerra Data Collector policy
    10. Pre-Installation Setup for EMC VNX CLARiiON
      1.  
        Pre-Installation setup for EMC VNX
      2.  
        Prerequisites for adding Data Collectors (EMC VNX)
      3.  
        Installation overview (EMC VNX)
      4.  
        Adding an EMC VNX Data Collector policy
    11. Pre-Installation Setup for EMC VPLEX
      1.  
        Pre-Installation setup for EMC VPLEX
      2.  
        Prerequisites for adding Data Collectors (EMC VPLEX)
      3.  
        Installation overview (EMC VPLEX)
      4.  
        Adding a EMC VPLEX Data Collector policy
    12. Pre-Installation Setup for EMC XtremIO
      1.  
        Pre-Installation setup for EMC XtremIO
      2.  
        Prerequisites for adding Data Collectors (EMC XtremIO)
      3.  
        Installation overview (EMC XtremIO)
      4.  
        Add an EMC XtremIO Data Collector policy
    13. Pre-Installation Setup for Hitachi Block
      1.  
        Pre-Installation setup for Hitachi Block
      2.  
        Prerequisites for adding Data Collectors (Hitachi Block)
      3.  
        Installation overview (Hitachi Block Storage)
      4.  
        Adding a Hitachi Block Storage Data Collector policy
      5. Configuring a Hitachi Device manager user
        1.  
          Validate the User ID access
      6.  
        Configuring a Collector for Hitachi NAS block storage
      7.  
        Adding an HP command view advanced Data Collector policy
    14. Pre-Installation Setup for Hitachi Content Platform (HCP)
      1.  
        Pre-Installation setup for Hitachi Content Platform (HCP)
      2.  
        Prerequisites for adding Data Collectors (Hitachi Content Platform)
      3.  
        Installation overview (Hitachi Content Platform)
      4.  
        Add a Hitachi Content Platform (HCP) Data Collector policy
      5.  
        Setting up permissions for an HCP local user or active directory user
      6. Hitachi content platform system management console
        1.  
          Local users
        2.  
          Local users and active directory users
      7. Hitachi content platform tenant management console
        1.  
          Local users
        2.  
          Active directory users
        3.  
          Local users and active directory users
    15. Pre-Installation Setup Hitachi NAS
      1.  
        Pre-Installation setup Hitachi NAS
      2.  
        Prerequisites for adding Data Collectors (Hitachi NAS - HNAS)
      3.  
        Installation overview (Hitachi NAS - HNAS)
      4.  
        Adding a Hitachi NAS (HNAS) Data Collector policy
      5. HNAS configuration requirements
        1.  
          Configuring SSC access
      6.  
        Adding the collector
    16. Pre-Installation Setup for Hitachi Vantara All-Flash and Hybrid Flash Storage
      1.  
        Pre-Installation setup for Hitachi Vantara All-Flash and Hybrid Flash Storage
      2.  
        Prerequisites for adding Data Collectors (Hitachi Vantara All-Flash and Hybrid Flash Storage)
      3.  
        Installation overview
      4.  
        Adding a Hitachi Vantara All-Flash and Hybrid Flash Storage policy
    17. Host Inventory Pre-Installation Setup
      1.  
        Host Inventory pre-installation setup
      2.  
        Plan host Data Collection
      3. Host Access Privileges, Sudo Commands, Ports, and WMI Proxy Requirements
        1.  
          Access Requirements by OS
      4.  
        WMI Proxy requirements for Windows host Data Collection
      5.  
        Host access requirements
      6.  
        Verify command paths
      7.  
        Host Inventory configuration steps
      8.  
        Host Inventory setup overview
      9.  
        Host Inventory maintenance overview
      10.  
        Before discovering hosts
      11.  
        Configure / Search the host Inventory
      12.  
        Manage credentials
      13.  
        Manage WMI proxy
      14.  
        Manage paths
      15.  
        Manage access control
      16.  
        Host Inventory management
      17. Configure host Discovery policies to populate the host Inventory
        1.  
          Discovery policy considerations
        2.  
          Configure a Discovery policy
        3.  
          Collecting from Clustered SQL server and Oracle applications
      18.  
        Execute and monitor host Discovery
      19. Validate host connectivity
        1.  
          Validate hosts
        2.  
          Validation history
      20.  
        Show errors
      21.  
        Filter the host Inventory - hide / un-hide, remove
      22. Host Inventory search and host Inventory export
        1.  
          Basic search
        2.  
          Pre-Defined search
        3.  
          Advanced search parameters
      23.  
        Export the host Inventory
      24. Configure and edit host probes
        1.  
          Host Inventory File Analytics probe
        2.  
          File Analytics Probe configurations by operating system
        3.  
          Both Windows and Linux servers
        4.  
          Best practices for Host Inventory File Analytics probes
      25. Propagate Probe Settings: Copy Probes, Paste Probes
        1.  
          Probe settings
    18. Pre-Installation Setup for HP 3PAR
      1.  
        Pre-Installation setup for HP 3PAR
      2.  
        Prerequisites for adding Data Collectors (HP 3PAR)
      3.  
        Installation Overview (HP 3PAR)
      4.  
        Adding an HP 3PAR Data Collector Policy
      5.  
        Adding an HP command view advanced Data Collector policy
    19. Pre-Installation Setup for HP EVA
      1.  
        Pre-Installation setup for HP EVA
      2.  
        Prerequisites for adding Data Collectors (HP EVA)
      3.  
        Installation overview (HP EVA)
      4.  
        Adding an HP EVA Data Collector policy
    20. Pre-Installation setup for HPE Nimble Storage
      1.  
        Pre-Installation setup for HPE Nimble Storage
      2.  
        Prerequisites for adding Data Collectors (HPE Nimble Storage)
      3.  
        Installation overview (HPE Nimble Storage)
      4.  
        Adding an HPE Nimble Storage Data Collector policy
    21. Pre-Installation Setup for Huawei OceanStor
      1.  
        Pre-Installation setup for Huawei OceanStor
      2.  
        Prerequisites for adding Data Collectors (Huawei OceanStor)
      3.  
        Installation overview
      4.  
        Add a Huawei OceanStor Data Collector policy
    22. Pre-Installation Setup for IBM COS
      1.  
        Introduction
      2.  
        Prerequisites for adding data collectors (IBM COS)
      3.  
        Installation overview (IBM COS)
      4.  
        Add IBM COS Data Collector policy
    23. Pre-Installation Setup for IBM Enterprise
      1.  
        Pre-Installation setup for IBM Enterprise
      2.  
        Prerequisites for adding Data Collectors (IBM Enterprise)
      3.  
        Installation overview (IBM Enterprise)
      4.  
        Adding an IBM Enterprise Data Collector policy
    24. Pre-Installation Setup for NetApp E-Series
      1.  
        Pre-Installation setup for NetApp E-Series
      2.  
        Prerequisites for adding Data Collectors (NetApp E-Series)
      3.  
        Installation overview (NetApp E-Series)
      4.  
        Adding a NetApp E-Series Data Collector policy
    25. Pre-Installation Setup for IBM SVC
      1.  
        Pre-Installation setup for IBM SVC
      2.  
        Prerequisites for adding Data Collectors (IBM SVC)
      3.  
        Installation overview (IBM SVC)
      4.  
        Adding an IBM SVC Data Collector policy
    26. Pre-Installation Setup for IBM XIV
      1.  
        Pre-Installation Setup for IBM XIV
      2.  
        Prerequisites for adding Data Collectors (IBM XIV)
      3.  
        Installation overview (IBM XIV)
      4.  
        Adding an IBM XIV Data Collector policy
    27. Pre-Installation Setup for Infinidat InfiniBox
      1.  
        Pre-Installation setup for Infinidat InfiniBox
      2.  
        Prerequisites for adding Data Collectors (Infinidat InfiniBox)
      3.  
        Installation overview
      4.  
        Add an Infinidat InfiniBox Data Collector policy
    28. Pre-installation setup for FUJITSU Data Collector
      1.  
        About data collector
      2.  
        Pre-installation setup
      3.  
        Prerequisites for adding Data Collectors
      4.  
        Installation overview
      5.  
        Adding a FUJITSU ETERNUS Data Collector policy
    29. Pre-Installation setup for Infinidat InfiniGuard
      1.  
        Introduction
      2.  
        Prerequisites for adding Data Collectors (Infinidat InfiniGuard)
      3.  
        Installation overview (Infinidat InfiniGuard)
      4.  
        Adding a InfiniGuard Data Collector policy
    30. Pre-Installation Setup for NetApp-7
      1.  
        Pre-Installation setup for NetApp-7
      2.  
        Prerequisites for adding Data Collectors (NetApp-7)
      3. Data Collector configurations specific to NetApp-7
        1.  
          If HTTP access is disabled on the vFiler
      4.  
        Installation overview (NetApp-7)
      5.  
        Adding a NetApp Data Collector policy
      6.  
        Testing the collection
      7.  
        Creating a NetApp user with API privileges
    31. Pre-Installation setup for NetApp StorageGRID
      1.  
        NetApp StorageGRID overview
      2.  
        Prerequisites for adding Data Collectors (NetApp StorageGRID)
      3.  
        Data Collector configuration specific to NetApp StorageGRID
      4.  
        Installing NetApp StorageGRID
      5.  
        Adding a NetApp StorageGRID Data Collector policy
      6.  
        Testing the collection
    32. Pre-Installation Setup for Microsoft Windows Server
      1.  
        Introduction
      2.  
        Prerequisites for adding Data Collectors (Microsoft Windows server)
      3.  
        Collecting from applications and services logs
      4.  
        Installation overview (Microsoft Windows Server)
      5.  
        Add a Microsoft Windows server Data Collector policy
    33. Pre-Installation Setup for NetApp Cluster
      1.  
        Pre-Installation setup for NetApp Cluster
      2.  
        Prerequisites for adding Data Collectors (NetApp Cluster)
      3.  
        Installation overview (NetApp Cluster-Mode)
      4.  
        Adding a NetApp Cluster-Mode Data Collector policy
      5.  
        Testing the collection
      6.  
        Creating a NetApp Cluster-Mode Read-Only user
    34. Pre-Installation Setup for Pure Storage FlashArray
      1.  
        Pre-Installation setup for pure Storage FlashArray
      2.  
        Prerequisites for adding Data Collectors (pure Storage FlashArray)
      3.  
        Installation overview (Pure storage FlashArray)
      4.  
        Add a pure storage FlashArray Data Collector policy
    35. Pre-Installation Setup for Veritas NetBackup Appliance
      1.  
        Overview
      2.  
        Prerequisites for adding Data Collectors (Veritas NetBackup appliance)
      3.  
        Installation Overview (Veritas NetBackup Appliance)
      4.  
        Adding a Veritas NetBackup Appliance Data Collector policy
  13. Section XIII. Data Collection for Virtualization
    1. Pre-Installation setup for VMware
      1.  
        Pre-Installation setup for VMware
      2.  
        VMware Data Collection
      3. Prerequisites for adding data collectors (VMware)
        1.  
          Virtualization Manager: Collection of VMware Data
        2. Configure VMware Access
          1.  
            Creating a VMware Read-Only User with Required Permissions
      4.  
        Installation overview (VMware)
      5.  
        Add a VMware Data Collector policy
      6. Datastore scan collection
        1.  
          Reports impacted by Datastore Collection
    2. Pre-Installation setup for IBM VIO
      1.  
        Pre-Installation setup for IBM VIO
      2.  
        Prerequisites for adding data collectors (IBM VIO)
      3.  
        Installation overview (IBM VIO)
      4.  
        Adding servers for the IBM VIO Data Collector policy
      5.  
        VIO servers (IBM Virtual I/O Servers)
      6.  
        LPAR clients (IBM Logical Partitioning Clients) managed by VIO servers
      7.  
        HMC (IBM Hardware Management Console)
      8.  
        Add an IBM VIO Data Collector policy
    3. Pre-Installation setup for Microsoft Hyper-V
      1.  
        Pre-Installation setup for Microsoft Hyper-V
      2.  
        Prerequisites for adding data collectors (Microsoft Hyper-V)
      3.  
        Installation overview (Microsoft Hyper-V)
      4.  
        Add a Microsoft Hyper-V Data Collector policy
  14. Section XIV. System Administration
    1. Preparing for Updates
      1.  
        About upgrades and updates
      2.  
        Determine the data collector version
      3.  
        Data collector updates with an aptare.jar file
      4.  
        Manual download of the aptare.jar file
      5.  
        Portal updates
    2. Backing Up and Restoring Data
      1.  
        Best practices for disaster recovery
      2.  
        Oracle database backups
      3.  
        File system backups
      4.  
        Oracle database: Cold backup
      5.  
        Oracle database: Export backups
      6.  
        Scheduling the oracle database export
      7.  
        Oracle database: On demand backup
      8.  
        Restoring the NetBackup IT Analytics system
      9.  
        Import the oracle database
      10.  
        Manual steps for database import / export using data pump
    3. Monitoring NetBackup IT Analytics
      1.  
        Starting and stopping portal server software
      2.  
        Starting and stopping the reporting database
      3.  
        Starting and stopping data collectors
      4.  
        Monitoring tablespaces
    4. Accessing NetBackup IT Analytics Reports with the REST API
      1.  
        Overview
      2.  
        Authentication for REST APIs
      3.  
        Extracting data from tabular reports (with pagination)
      4.  
        Exporting reports
      5.  
        Exporting custom dashboards
    5. Defining NetBackup Estimated Tape Capacity
      1.  
        NetBackup estimated tape capacity overview
      2.  
        Estimated capacity notes
      3.  
        Updating the estimated capacity table
      4.  
        Listing volume pool IDs and media types
    6. Automating Host Group Management
      1.  
        About automating host group management
      2.  
        Task overview: managing host groups in bulk
      3.  
        Preparing to use PL/SQL utilities
      4.  
        General utilities
      5. Categorize host operating systems by platform and version
        1.  
          Use Regular Expressions to Override or Modify Default Host OS Categorization
        2.  
          Host OS Categorization Default Settings
        3.  
          Utility to Update Host OS Categorizations
        4.  
          Categorize Host Operating Systems On Demand
      6.  
        Identifying a host group ID
      7.  
        Move or copy clients
      8.  
        Organize clients by attribute
      9.  
        Move host group
      10.  
        Delete host group
      11.  
        Move hosts and remove host groups
      12.  
        Organize clients into groups by backup server
      13.  
        Merge duplicate backup clients
      14.  
        Bulk load utilities
      15.  
        Load host aliases
      16.  
        Load details of new hosts or update existing hosts
      17. Load relationships between hosts and host group
        1.  
          Sample Audit File (output from load_package.loadGroupMemberFile)
      18.  
        Veritas NetBackup utilities
      19. Automate NetBackup utilities
        1.  
          Scheduling a NetBackup Utility Job to Run Automatically
      20.  
        Organize clients into groups by management server
      21.  
        Set up an inactive clients group
      22.  
        Set up a host group for clients in inactive policies
      23.  
        Set up clients by policy
      24.  
        Set up clients by policy type
      25.  
        IBM Tivoli storage manager utilities
      26.  
        Set up clients by policy domain
      27.  
        Set up clients by IBM Tivoli storage manager instance
      28. Scheduling utilities to run automatically
        1.  
          Sample .sql file (setup_ora_job.sql) to set up an automatic job
    7. Attribute Management
      1.  
        Attribute bulk load utilities
      2.  
        Attribute naming rules
      3.  
        Rename attributes before upgrading
      4.  
        Load host attributes and values
      5.  
        Load attributes and values and assign to hosts
      6.  
        Load array attributes and values and assign to arrays
      7.  
        Overview of application attributes and values
      8.  
        Load application database attributes and values
      9.  
        Load MS Exchange organization attributes and values
      10.  
        Load LUN attributes and values
      11.  
        Load switch attributes and values
      12.  
        Load port attributes and values
    8. Importing Generic Backup Data
      1. About generic backup data collection
        1.  
          Considerations
      2.  
        Configuring generic backup data collection
      3. CSV Format Specification
        1.  
          EXAMPLE: genericBackupJobs.csv
      4.  
        Manually loading the CSV file
    9. Backup Job Overrides
      1.  
        Overview
      2.  
        Configure a backup job override
    10. Managing Host Data Collection
      1.  
        Identifying hosts by WWN to avoid duplicates
      2.  
        Setting a host's priority
      3.  
        Determining host ranking
      4.  
        Loading host and WWN relationships
      5.  
        Loading the host HBA port data
      6.  
        Create a CSV file
      7.  
        Execute the script
    11. System Configuration in the Portal
      1.  
        System configuration in the portal
      2.  
        System configuration: functions
      3.  
        Navigation overview
      4.  
        System configuration parameter descriptions: Additional info
      5.  
        Anomaly detection
      6.  
        Data collection: Capacity chargeback
      7.  
        Database administration: database
      8.  
        Host discovery: EMC Avamar
      9.  
        Host discovery: Host
      10.  
        Custom parameters
      11.  
        Adding/editing a custom parameter
      12.  
        Portal customizations
      13.  
        Configuring global default inventory object selection
      14.  
        Restricting user IDs to single sessions
      15.  
        Customizing date format in the report scope selector
      16.  
        Customizing the maximum number of lines for exported reports
      17.  
        Customizing the total label display in tabular reports
      18.  
        Customizing the host management page size
      19.  
        Customizing the path and directory for File Analytics database
      20.  
        Configuring badge expiration
      21.  
        Configuring the maximum cache size in memory
      22.  
        Configuring the cache time for reports
      23.  
        Events captured for audit
    12. Performance Profile Schedule Customization
      1.  
        Overview
      2.  
        Customize the performance profile schedule
    13. Configuring AD/LDAP
      1.  
        About user authentication
      2.  
        AD/LDAP Configuration Properties
      3. AD/LDAP configuration
        1.  
          AD/LDAP configuration for authentication
        2.  
          AD/LDAP Configuration for authentication and authorization
        3.  
          Migrate portal users when AD/LDAP authentication is configured
        4.  
          Migrate portal users with LDAP authentication and authorization configured
      4. Support LDAP over SSL
        1.  
          Sample portal.properties configurations for AD/LDAP
      5.  
        Creating portal super users
      6.  
        Active directory tools
      7.  
        Using LDP to find the base DN
      8.  
        Using LDP to search active directory
    14. Configuring Single Sign On (SSO) Using Security Assertion Markup Language (SAML)
      1.  
        Overview
      2.  
        Single sign-on (SSO) prerequisites
      3. Setting up the external Identity Provider (IDP) server
        1.  
          Users and groups in the external LDAP directory
        2.  
          Registering with the IDP server
      4.  
        Activating single Sign-on (SSO) in the portal
      5.  
        SSO troubleshooting and maintenance
    15. Changing Oracle Database User Passwords
      1.  
        Overview
      2.  
        Database connection properties
      3.  
        Modify the Oracle database user passwords
      4.  
        Determine if Oracle is using the default login password
    16. Integrating with CyberArk
      1.  
        Introduction
      2.  
        CyberArk setup prerequisites
      3.  
        Setting up the portal to integrate with CyberArk
    17. Tuning NetBackup IT Analytics
      1.  
        Before you begin tuning
      2.  
        Tuning the portal database
      3.  
        Performance recommendations
      4.  
        Reclaiming free space from Oracle
      5.  
        Portal/Data receiver/Anomaly engine Java memory settings
    18. Defining Report Metrics
      1.  
        Changing backup success percentage
      2.  
        Changing job status
    19. Working with Log Files
      1.  
        About debugging NetBackup IT Analytics
      2.  
        Turn on debugging
      3.  
        Database logging
      4. Portal and data collector log files - reduce logging
        1.  
          Portal Log Files
        2.  
          Data Collector Log Files
      5.  
        Database SCON logging - reduce logging
      6.  
        Refreshing the database SCON log
      7.  
        Logging user activity in audit.log
      8.  
        Logging only what a user deletes
      9.  
        Logging all user activity
      10.  
        Data collector log files
      11.  
        Data collector log file organization
      12. Data collector log file naming conventions
        1.  
          Sample Vendor.Product Naming Convention
        2.  
          Log File Names Based on Data Collector Generation
        3.  
          Checkinstall Log
        4.  
          Test Connection Log
        5.  
          Log file naming convention by collected system
      13.  
        General data collector log files
      14.  
        Find the event / meta collector ID
      15. Portal log files
        1.  
          Managing Apache Log Files
      16.  
        Database log files
      17.  
        Installation / Upgrade log files
    20. SNMP Trap Alerting
      1.  
        Overview
      2.  
        SNMP configurations
      3.  
        Standard OIDs
      4. Data in an alerting trap
        1.  
          Example of policy based alert
    21. SSL Certificate Configuration
      1.  
        SSL certificate configuration
      2.  
        SSL implementation overview
      3.  
        Obtain an SSL certificate
      4.  
        Update the web server configuration to enable SSL
      5. Configure virtual hosts for portal and / or data collection SSL
        1.  
          SSL Implementation for the Portal Only
        2.  
          SSL Implementation for Data Collection Only
        3.  
          SSL Implementation for Both the Portal and Data Collection
      6.  
        Enable / Disable SSL for a Data Collector
      7.  
        Enable / Disable SSL for emailed reports
      8.  
        Test and troubleshoot SSL configurations
      9.  
        Create a self-signed SSL certificate
      10.  
        Configure the Data Collector to trust the certificate
      11.  
        Keystore file locations on the Data Collector server
      12.  
        Import a certificate into the Data Collector Java keystore
      13. Keystore on the portal server
        1.  
          Features that Require the SSL Certificate
        2.  
          Add a Certificate into the Portal Keystore
        3.  
          Update a Certificate in the Portal Keystore
        4.  
          Download a Certificate from the Portal Keystore
      14.  
        Add a virtual interface to a Linux server
      15.  
        Add a virtual / secondary IP address on Windows
    22. Portal Properties: Format and Portal Customizations
      1.  
        Introduction
      2.  
        Configuring global default inventory object selection
      3.  
        Restricting user IDs to single sessions
      4.  
        Customizing date format in the report scope selector
      5.  
        Customizing the maximum number of lines for exported reports
      6.  
        Customizing the total label display in tabular reports
      7.  
        Customizing the host management page size
      8.  
        Customizing the path and directory for file analytics database
      9.  
        Configuring badge expiration
      10.  
        Configuring the maximum cache size in memory
      11.  
        Configuring the cache time for reports
      12.  
        Configuring LDAP to use active directory (AD) for user group privileges
    23. Data Retention Periods for SDK Database Objects
      1.  
        Data retention periods for SDK database objects
      2.  
        Find the domain ID and database table names
      3.  
        Retention period update for SDK user-defined objects example
      4.  
        SDK user-defined database objects
      5.  
        Capacity: default retention for basic database tables
      6.  
        Capacity: default retention for EMC Symmetrix enhanced performance
      7.  
        Capacity: Default retention for EMC XtremIO
      8.  
        Capacity: Default retention for Dell EMC Elastic Cloud Storage (ECS)
      9.  
        Capacity: Default retention for Windows file server
      10.  
        Capacity: Default retention for Pure Storage FlashArray
      11.  
        Cloud: Default retention for Amazon Web Services (AWS)
      12.  
        Cloud: Default retention for Microsoft Azure
      13.  
        Cloud: Default retention for OpenStack Ceilometer
      14.  
        Configure multi-tenancy data purging retention periods
    24. Troubleshooting
      1.  
        Troubleshooting user login problems
      2.  
        Forgotten password procedure
      3.  
        Login issues
      4.  
        Connectivity issues
      5. Data Collector and database issues
        1.  
          Insufficient Privileges
        2.  
          Remove an Inactive Hitachi Array from the Database
        3. Report Emails are not Being Sent
          1.  
            Additional Email Troubleshooting Recommendations
        4.  
          General Reporting Issues
        5.  
          Performance Issues
  15. Section XV. Portal Install and Upgrade (Windows)
    1. Installing the Portal on a Windows server
      1.  
        Introduction
      2.  
        Portal installation memory requirements
      3.  
        Multi-language support and locale considerations (Windows)
      4.  
        Task 1: Portal and database deployment strategies (Windows)
      5.  
        Task 2: Pre-installation configuration (Windows)
      6. Task 3: Installing Oracle application binaries (Windows)
        1.  
          Troubleshoot the Oracle installation
      7.  
        Task 4: Installing Portal application binaries (Windows)
      8.  
        Task 5: Request the license key file (Windows)
      9.  
        Task 6: Log into the Portal (Windows)
      10.  
        Task 7: Install the license key file (Windows)
      11.  
        Task 8: Performing a cold backup (Windows)
      12.  
        Uninstall the NetBackup IT Analytics Portal
    2. Upgrade NetBackup IT Analytics Portal on Windows
      1.  
        Overview
      2.  
        Upgrade path
      3.  
        Before upgrading
      4. Upgrade NetBackup IT Analytics Portal
        1.  
          Upgrading a shared services environment
        2.  
          Run the upgrade utility installer (Windows)
        3.  
          Running the upgrade utility
        4. Attribute merging during the Portal upgrade
          1.  
            Attribute management during the Portal upgrade
      5.  
        Data Collector upgrades
      6.  
        Troubleshooting - manual Data Collector upgrades
      7.  
        Collector updates from the NetBackup IT Analytics Portal
      8.  
        Clustered NetBackup upgrade procedure
      9.  
        Upgrade methods to incorporate enterprise objects
    3.  
      Oracle patches for the database server
    4. Upgrade and migrate to a new server
      1.  
        Upgrade and migrate to a new server
  16. Section XVI. Portal Install and Upgrade (Linux)
    1. Install the NetBackup IT Analytics Portal on a Linux server
      1.  
        Introduction
      2.  
        Portal installation memory requirements
      3.  
        Multi-language support and locale considerations (Linux)
      4.  
        OVA-based deployment on VMware ESXi
      5. Installer-based deployment
        1.  
          Task 1: Portal and database deployment strategies (Linux)
        2.  
          Task 2: Pre-installation configuration (Linux)
        3.  
          Task 3: Install Oracle database application binaries (Linux)
        4.  
          Task 4: Install the Portal application binaries (Linux)
        5.  
          Task 5: Installing the database schema (Linux)
        6.  
          Task 6: Start the Portal services (Linux)
        7.  
          Task 7: Request the license key file (Linux)
        8.  
          Task 8: Log into the Portal
        9.  
          Task 9: Install the license key file (Linux)
        10.  
          Task 10: Performing a cold backup of the database (Linux)
        11.  
          Recommended database backup process
      6.  
        Uninstall the NetBackup IT Analytics Portal
    2. Upgrade NetBackup IT Analytics Portal on Linux
      1.  
        Overview
      2.  
        Upgrade path
      3.  
        Before upgrading
      4. Upgrade NetBackup IT Analytics Portal
        1.  
          Upgrade a shared services environment
        2.  
          Run the upgrade utility installer (Linux)
        3.  
          Known issues
        4.  
          Run the upgrade utility
        5.  
          After the upgrade
        6.  
          Upgrade methods to incorporate enterprise objects
        7. Attribute merging during the Portal upgrade
          1.  
            Attribute Management During the Portal Upgrade
          2.  
            Example of a Merge of Attribute Values
          3.  
            Steps to Rename Duplicate Attributes
          4.  
            Best Practice for Attributes in Multi-Tenancy Environments
      5. Data Collector upgrades
        1.  
          Mandatory prerequisites
      6.  
        Troubleshoot - Manual Data Collector upgrades
      7.  
        Collector updates from the NetBackup IT Analytics Portal
    3. Oracle patches for the database server
      1.  
        Apply Oracle-recommended patches
      2. Apply Oracle 19c January 2023 patch application on Linux
        1.  
          Pre-Install setup
        2.  
          OPatch installation steps
        3.  
          Install the Oracle patch
        4.  
          Validate the patch
        5.  
          Validate the JDK version update
    4. Upgrade and Migrate to a new server
      1. Upgrade and migrate to a new server
        1.  
          Install the latest release of NetBackup IT Analytics on the new server
        2.  
          Perform an export of the database on the existing server
        3.  
          Stop Portal and agent services on the new server
        4.  
          Drop and re-create the existing portal user on the new server
        5.  
          Import the database onto the new server
        6.  
          Start Portal and agent services on the new server
        7.  
          Download, install, and execute to upgrade the database schema
      2.  
        Testing
      3.  
        Update Data Collector binaries (if necessary)
    5. Appendix C. X Virtual Frame Buffer
      1.  
        Configure X Virtual Frame Buffer (Xvfb)
  17. Section XVII. Licensing
    1. License installation and guidelines
      1. License overview
        1.  
          License Editions
        2.  
          License feature matrix
      2.  
        Understanding licensing restrictions
      3.  
        Get the license key file
      4.  
        Install a license
      5. Verify the current license configuration
        1.  
          Run the License Summary report
        2.  
          Help About
        3.  
          View License Details
      6.  
        Consumption criteria of license suites
      7. Storage suite
        1. Capacity Manager
          1.  
            Storage Arra