Important Update: Cohesity Products Documentation
All Cohesity product documentation are now managed via the Cohesity Docs Portal: https://docs.cohesity.com/HomePage/Content/home.htm. Some documentation available here may not reflect the latest information or may no longer be accessible.
Veritas 5150 Appliance Hardware Installation Guide
- Hardware overview
- Preinstallation requirements
- Installation procedures
- Installing the appliance into a rack
- Connecting the network cables
- Connecting the power cords
- Turning on the hardware and verifying operation
- Configuring the Veritas Remote Management Interface from a Flex Appliance
- Configuring the Veritas Remote Management Interface using laptop
- Accessing and using the Veritas Remote Management interface
- Index
Appliance rear panel
The rear panel of the appliance contains several default ports that are embedded.
The following list describes the numbered ports.
VGA port
3 USB ports
Veritas Remote Management Interface (remote management (IPMI) port)
Four copper, RJ45, 1Gb Ethernet* ports, host0, NIC0, NIC1, and NIC2, left to right.
Reserved for future use.
The right PCIe is used for the add-on ethernet cards.
Redundant 1300 W power modules
Note:
* The embedded Ethernet ports are copper. PCIe Ethernet ports can be either fibre or copper. You cannot bond the copper ports and the fibre ports to each other.