Veritas Access 3340 Appliance Product Description

Last Published:
Product(s): Appliances (8.1, 8.0, 7.4.3, 7.4.2, 7.3.2)
Platform: Veritas 3340
  1. About the Access 3340 Appliance
    1.  
      About the Veritas Access 3340 Appliance
    2.  
      Features and components of the appliance
    3.  
      Locating the appliance serial number
    4. About 3340 compute node disk drive configurations
      1.  
        About the compute node disk drive LEDs
    5.  
      About the compute node front panel USB port
    6. About the compute node control panel
      1.  
        About the System Status LED states
      2.  
        About the Power button LED states
    7.  
      About the compute node rear panel
    8. Standard 3340 Appliance PCIe-based I/O configuration
      1. Total 3340 Appliance on-board and PCIe-based I/O ports
        1.  
          Intel RSP3GD016J SAS3 RAID PCIe host bus adapter
      2.  
        3340 Appliance network interface card port assignments
      3.  
        SAS3 host bus adapter connector locations and labels
  2. About the Veritas 5U84 Storage Shelves
    1. About Veritas Access 3340 Appliance storage shelves
      1.  
        Available appliance storage options
      2. About the Veritas 5U84 Storage Shelf disk drive drawers
        1.  
          Disk drive slot numbering
        2.  
          Disk Drive In Carrier (DDIC) modules
        3.  
          Disk Drive Drawer printed circuit board (PCB) assemblies
        4.  
          Drawer Sideplane Status panels
        5.  
          Drawer Sideplane hot swap LED indicators
      3.  
        5U84 Primary Storage Shelf and the 5U84 Expansion Storage Shelf control panel
    2. About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components
      1.  
        Veritas 5U84 Primary Storage Shelf RAID controllers
      2. Veritas 5U84 Expansion Storage Shelf Expansion I/O modules
        1.  
          Expansion I/O module Status LED location and conditions
        2.  
          Expansion I/O module SAS Activity LED location and conditions
      3.  
        Veritas 5U84 Storage Shelf cooling modules
      4.  
        5U84 Storage Shelf Power Supply Units
  3. Access 3340 Appliance and 5U84 Storage Shelf cables
    1.  
      Power cables
    2.  
      Network cable
    3.  
      Multi-mode fiber optic cable
    4.  
      SAS-3 cable
    5.  
      Twinaxial copper cables
  4. Appendix A. Technical specifications, Environmental/Protocol standards, and Compliance standards
    1.  
      3340 Appliance compute node technical specifications
    2.  
      Veritas 5U84 Storage Shelf technical specifications
    3.  
      Environmental specifications
    4.  
      Protocol standards
    5. Regulatory, compliance, and certification information
      1.  
        Product regulatory compliance
      2.  
        Product safety compliance
      3.  
        Product EMC Compliance - Class A Compliance
      4.  
        Product ecology compliance
      5.  
        Certifications / Registrations / Declarations
      6. Electromagnetic compatibility notices
        1.  
          FCC Verification Statement (USA)
        2.  
          ICES-003 (Canada)
        3.  
          CE Declaration of Conformity (Europe)
        4.  
          VCCI (Japan)
        5.  
          BSMI (Taiwan)
  5.  
    Index

About the compute node rear panel

The rear panel of the appliance compute node has several access ports and other features, which are displayed in the following figures.

Figure: Access 3340 Appliance compute node rear panel overview

Access 3340 Appliance compute node rear panel overview

Table: Compute node rear panel features and connectors

Number

Function

1,2

Power Supply 1 and Power Supply 2 - Dual, redundant, and hot-swappable power supply modules

3

DB-15 VGA monitor connector

4

Serial port - Serial connection for Veritas Technical Support use only

5

Three stacked USB 3.0 Type A serial ports for general use

6

IPMI port - An external RJ45 port used for appliance remote management purposes

7

eth0/NIC1

A 1-GbE port copper connector that is reserved for use during the initial configuration of the 3340 Appliance

Note:

Veritas does not support forming a NIC bond using eth0/NIC1 with other eth/NIC ports.

8

eth1/NIC2

9

eth2/NIC3

A 1-GbE port copper connector

The eth2 ports on each of the 3340 Appliance compute nodes attach to each other using straight through or cross-over cables. For example, eth2 on first compute node connects to eth2 of the second compute node.

10

eth3/NIC4

A 1-GbE port copper connector

The eth3 ports on each of the 3340 Appliance compute nodes attach to each other using straight through or cross-over cables. For example, eth3 on first compute node connects to eth3 of the second compute node.

11

PCIe riser assembly 1

12

PCIe riser assembly 2

13

PCIe riser assembly 3 *

(empty)

* 3340 Appliance compute nodes do not contain PCIe riser cards in PCI riser assembly 3.

Veritas appliances may include grounding studs in case your lab environment has such a requirement. The studs are located on the rear panel of the appliance. You can use standard grounding practices to connect grounding wires to the studs.

The serial number is located on a vertical bar on the rear panel of the appliance.

Figure: Serial number location

Serial number location

The ports on the rear panel are color-coded for easy identification.

Figure: 3340 Appliance rear port color codes

3340 Appliance rear port color codes