Please enter search query.
Search <book_title>...
Veritas™ Appliance iSCSI Guide
Last Published:
2021-03-01
Product(s):
Appliances (3.3.0.1, 3.2, 3.1.2, 3.1.1)
Platform: NetBackup Appliance OS
- Overview
- Understanding the appliance configurations
- Understanding NetBackup for VMware
- Configuring iSCSI
- Configuring the appliance for iSCSI
- Setting the IQN for the initiator
- Viewing the interface properties
- Configuring the interface properties
- Removing and resetting the interface properties
- About CHAP authentication
- Discovering targets by using the portal address
- About iSNS
- Discovering targets by using iSNS
- Connecting to a target
- Disconnecting the sessions with a target
- Viewing the targets
- Troubleshooting iSCSI issues and some best practices
Setting the IQN for the initiator
This section explains how you can set the IQN for the NetBackup Appliance (initiator).
To set the IQN
- Open a Secure Shell (SSH) session to log on to the appliance as an administrator.
- Navigate to the Main_Menu > Settings > iSCSI menu.
- Type the command Initiator Set IQN and enter the IQN as a parameter.
Note the following about IQN:
The IQN must be up to 255 characters long.
The IQN can only contain numbers (0-9), letters (A-Z and a-z), colons (:), hyphens (-), and periods (.).
Example: iqn.1999-06.com.veritas:abc
- The following message is displayed:
iSCSI> Initiator Set IQN iqn.veritas.abc - [Info] The IQN has been updated to iqn.veritas.abc.