Please enter search query.
Search <book_title>...
Veritas NetBackup™ Appliance iSCSI Guide
Last Published:
2017-11-06
Product(s):
Appliances (3.1)
- Overview
- Understanding the appliance configurations
- Understanding NetBackup for VMware
- Configuring iSCSI
- Configuring the appliance for iSCSI
- Setting the IQN for the initiator
- Viewing the interface properties
- Configuring the interface properties
- Removing and resetting the interface properties
- About CHAP authentication
- Discovering targets by using the portal address
- About iSNS
- Discovering targets by using iSNS
- Connecting to a target
- Disconnecting the sessions with a target
- Viewing the targets
- Troubleshooting iSCSI issues and some best practices
Viewing the interface properties
This section lists the procedures for viewing the iSCSI interface properties.
To view the interface properties
- Open a Secure Shell (SSH) session to log on to the appliance as an administrator.
- Navigate to the Main_Menu > Settings > iSCSI menu.
- Type the command Interface Show and press Enter to view the iSCSI interfaces. The following properties are displayed:
appliance.iSCSI > Interface Show Showing the available interfaces... +--------------+----------+-----------------+-------------+-------+-------+----+----+ |Interface Name|Network | MAC Address | IP Address |Netmask Gateway|MTU |VLAN | |Interface | | | | | |Tag | +--------------+----------+-----------------+-------------+-------+-------+----|----+ | iscsi1 | eth6 |00:0e:1e:53:55:11|10.181.198.62| | |1500| | +--------------+-----------------+-----------|------------+-------+-------+----+----+ | iscsi2 | eth7 |00:0e:1e:53:55:13| | | |1500| | +--------------+-----------------+-----------|------------+-------+-------+----|----+