Veritas InfoScale™ 7.1 Release Notes - Linux
- About this document
- Important release information
- About the Veritas InfoScale product suite
- Licensing Veritas InfoScale
- About Veritas Services and Operations Readiness Tools
- Changes introduced in 7.1
- Changes related to Veritas Cluster Server
- VCS agent for Oracle supports Oracle 12c Pluggable database detail monitoring
- VCS agent for Oracle supports Oracle Flex ASM
- Attributes introduced in VCS 7.1
- Auto refresh of fencing registrations on the coordination points
- About Just In Time Availability
- Stronger security with 2048 bit key and SHA256 signature certificates
- Pluggable Database (PDB) migration between container databases
- Application Monitoring Inside Docker containers
- VirtualDiskMode: the Optional Attribute of the VMwareDisks agent
- Changes in the Veritas Cluster Server Engine
- Support for 64-bit architecture
- Changes related to installation and upgrades
- Changes related to Veritas Volume Manager
- Managing application noise with MAXIOPS settings
- Updating DAS disk names to include the host name in FSS environments
- New option -o cluster in vxdisk(1M) command
- Support for mapping remote storage to a node in the cluster
- Support for volume encryption
- Changes to the vxdisk list output
- Smartassist - SmartIO Caching Profiler tool
- Automatically provision storage for Docker Containers
- Changes related to Veritas File System
- Online migration of a native file system (ext4) to VxFS file system
- SmartIO supports for multiple VxFS cache areas
- IOstat collection for files is disabled by default
- A new flag is added for the fsapadm(1M) commands define option
- The nodisable option behaves similar to mwdisable ioerror policy
- Disk layout version (DLV) 11 is the default DLV for VxFS
- Support to mount an inconsistent file system
- Changes related to Dynamic Multi-Pathing
- Changes related to Replication
- Not supported in this release
- Changes related to documents
- Technology Preview: Application isolation in CVM environments with disk group sub-clustering
- Changes related to Veritas Cluster Server
- System requirements
- Fixed Issues
- Known Issues
- Issues related to installation and upgrade
- The noipc option is not workable in the response file (3870139)
- CPS-based fencing configuration may fail on SLES12SP1 due to the time of the client cluster failing to synchronize with the Coordination Point servers (3873846)
- CacheArea attribute is not updated correctly in the types.cf and the main.cf file under /etc/VRTSvcs/conf/config (3875298)
- Notify sink resource and generic application resource moves to OFFLINE|UNKNOWN state after VCS upgrade [3806690]
- Switch fencing in enable or disable mode may not take effect if VCS is not reconfigured [3798127]
- During an upgrade process, the AMF_START or AMF_STOP variable values may be inconsistent [3763790]
- Stopping the installer during an upgrade and then resuming the upgrade might freeze the service groups (2574731)
- The uninstaller does not remove all scripts (2696033)
- NetBackup 6.5 or older version is installed on a VxFS file system (2056282)
- Error messages in syslog (1630188)
- Ignore certain errors after an operating system upgrade - after a product upgrade with encapsulated boot disks (2030970)
- After a locale change restart the vxconfig daemon (2417547, 2116264)
- Dependency may get overruled when uninstalling multiple RPMs in a single command [3563254]
- Storage Foundation known issues
- Dynamic Multi-Pathing known issues
- Veritas Volume Manager known issues
- Failed verifydata operation leaves residual cache objects that cannot be removed (3370667)
- LUNs claimed but not in use by VxVM may report "Device Busy" when it is accessed outside VxVM (3667574)
- If the disk with CDS EFI label is used as remote disk on the cluster node, restarting the vxconfigd daemon on that particular node causes vxconfigd to go into disabled state (3873123)
- When the disk detach policy is local and connectivity of some DMP node on which plex resides restores, reads continues to serve from only (n - 1) plexes, where n is total no of plexes in the volume (3871850)
- Unable to set master on the secondary site in VVR environment if any pending I/O's are on the secondary site (3874873)
- After installing DMP 6.0.1 on a host with the root disk under LVM on a cciss controller, the system is unable to boot using the vxdmp_kernel command [3599030]
- VRAS verifydata command fails without cleaning up the snapshots created [3558199]
- SmartIO VxVM cache invalidated after relayout operation (3492350)
- VxVM fails to create volume by the vxassist(1M) command with maxsize parameter on Oracle Enterprise Linux 6 Update 5 (OEL6U5) [3736647]
- Performance impact when a large number of disks are reconnected (2802698)
- Machine fails to boot after root disk encapsulation on servers with UEFI firmware (1842096)
- Veritas Volume Manager (VxVM) might report false serial split brain under certain scenarios (1834513)
- Root disk encapsulation issue (1603309)
- VxVM starts before OS device scan is done (1635274)
- DMP disables subpaths and initiates failover when an iSCSI link is failed and recovered within 5 seconds. (2100039)
- During system boot, some VxVM volumes fail to mount (2622979)
- Unable to upgrade the kernel on an encapsulated boot disk on SLES 11 (2612301)
- Removing an array node from an IBM Storwize V7000 storage system also removes the controller (2816589)
- Continuous trespass loop when a CLARiiON LUN is mapped to a different host than its snapshot (2761567)
- Disk group import of BCV LUNs using -o updateid and -ouseclonedev options is not supported if the disk group has mirrored volumes with DCO or has snapshots (2831658)
- After devices that are managed by EMC PowerPath lose access to storage, Veritas Volume Manager commands are delayed (2757198)
- vxresize does not work with layered volumes that have multiple plexes at the top level (3301991)
- The DMP EMC CLARiiON ASL does not recognize mirror view not ready LUNs (3272940)
- Running the vxdisk disk set clone=off command on imported clone disk group luns results in a mix of clone and non-clone disks (3338075)
- vxunroot cannot encapsulate a root disk when the root partition has XFS mounted on it (3614362)
- Restarting the vxconfigd daemon on the slave node after a disk is removed from all nodes may cause the disk groups to be disabled on the slave node (3591019)
- DMP panics if a DDL device discovery is initiated immediately after loss of connectivity to the storage (2040929)
- Failback to primary paths does not occur if the node that initiated the failover leaves the cluster (1856723)
- Issues if the storage connectivity to data disks is lost on a CVM slave node while vxconfigd was not running on the node (2562889)
- The vxcdsconvert utility is supported only on the master node (2616422)
- Re-enabling connectivity if the disks are in local failed (lfailed) state (2425977)
- Issues with the disk state on the CVM slave node when vxconfigd is restarted on all nodes (2615680)
- Plex synchronization is not completed after resuming synchronization on a new master when the original master lost connectivity (2788077)
- A master node is not capable of doing recovery if it cannot access the disks belonging to any of the plexes of a volume (2764153)
- CVM fails to start if the first node joining the cluster has no connectivity to the storage (2787713)
- CVMVolDg agent may fail to deport CVM disk group when CVMDeportOnOffline is set to 1
- cvm_clus resource goes into faulted state after the resource is manually panicked and rebooted in a 32 node cluster (2278894)
- DMP uses OS device physical path to maintain persistence of path attributes from 6.0 [3761441]
- The vxsnap print command shows incorrect value for percentage dirty [2360780]
- device.map must be up to date before doing root disk encapsulation (3761585, 2202047)
- Virtualization known issues
- Configuring application for high availability with storage using VCS wizard may fail on a VMware virtual machine which is configured with more than two storage controllers [3640956]
- Agent kill on source during migration may lead to resource concurrency violation (3042499)
- Host fails to reboot when the resource gets stuck in ONLINE|STATE UNKNOWN state [2738864]
- VM state is in PAUSED state when storage domain is inactive [2747163]
- Switching KVMGuest resource fails due to inadequate swap space on the other host [2753936]
- Policies introduced in SLES 11SP2 may block graceful shutdown if a VM in SUSE KVM environment [2792889]
- Load on libvirtd may terminate it in SUSE KVM environment [2824952]
- Offline or switch of KVMGuest resource fails if the VM it is monitoring is undefined [2796817]
- Increased memory usage observed even with no VM running [2734970]
- Resource faults when it fails to ONLINE VM beacuse of insufficient swap percentage [2827214]
- Migration of guest VM on native LVM volume may cause libvirtd process to terminate abruptly (2582716)
- Virtual machine may return the not-responding state when the storage domain is inactive and the data center is down (2848003)
- Guest virtual machine may fail on RHEL 6.1 if KVM guest image resides on CVM-CFS [2659944]
- System panics after starting KVM virtualized guest or initiating KVMGuest resource online [2337626]
- KVMGuest agent fail to online the resource in a DR configuration with error 400 [3056096]
- CD ROM with empty file vmPayload found inside the guest when resource comes online [3060910]
- VCS fails to start virtual machine on another node if the first node panics [3042806]
- VM fails to start on the target node if the source node panics or restarts during migration [3042786]
- High Availability tab does not report LVMVolumeGroup resources as online [2909417]
- Cluster communication breaks when you revert a snapshot in VMware environment [3409586]
- VCS may detect the migration event during the regular monitor cycle due to the timing issue [2827227]
- Veritas File System known issues
- Cfsmount test fails with error logs that inaccessible block device path for the file system (3873325)
- FSMount fails to mount a file system with or without SmartIO options (3870190)
- Docker does not recognize VxFS backend file system
- On RHEL7 onwards, Pluggable Authentication Modules(PAM) related error messages for Samba daemon might occur in system logs [3765921]
- Delayed allocation may be turned off automatically when one of the volumes in a multi-volume file system nears 100%(2438368)
- The file system deduplication operation fails with the error message "DEDUP_ERROR Error renaming X checkpoint to Y checkpoint on filesystem Z error 16" (3348534)
- Enabling delayed allocation on a small file system may disable the file system (2389318)
- After upgrading a file system using the vxupgrade(1M) command, the sfcache(1M) command with the stat option shows garbage value on the secondary node. [3759788]
- XFS file system is not supported for RDE
- When hard links are present in the file system, the sfcache list command shows incorrect cache usage statistics (3059125, 3760172)
- The command tab auto-complete fails for the /dev/vx/ file tree; specifically for RHEL 7 (3602082)
- Task blocked messages display in the console for RHEL5 and RHEL6 (2560357)
- Deduplication can fail with error 110 (3741016)
- System unable to select ext4 from the file system (2691654)
- The system panics with the panic string "kernel BUG at fs/dcache.c:670!" (3323152)
- A restored volume snapshot may be inconsistent with the data in the SmartIO VxFS cache (3760219)
- When in-place and relocate compression rules are in the same policy file, file relocation is unpredictable (3760242)
- During a deduplication operation, the spoold script fails to start (3196423)
- The file system may hang when it has compression enabled (3331276)
- "rpc.statd" in the "nfs-utils" RPM in the various Linux distributions does not properly cleanse the untrusted format strings (3335691)
- Replication known issues
- RVGPrimary agent operation to start replication between the original Primary and the bunker fails during failback (2036605)
- A snapshot volume created on the Secondary, containing a VxFS file system may not mount in read-write mode and performing a read-write mount of the VxFS file systems on the new Primary after a global clustering site failover may fail [3761497]
- In an IPv6-only environment RVG, data volumes or SRL names cannot contain a colon (1672410, 1672417, 1825031)
- vxassist relayout removes the DCM (145413)
- vradmin functionality may not work after a master switch operation [2158679]
- Cannot relayout data volumes in an RVG from concat to striped-mirror (2129601)
- vradmin verifydata operation fails when replicating between versions 5.1 and 6.0 or later (2360713)
- vradmin verifydata may report differences in a cross-endian environment (2834424)
- vradmin verifydata operation fails if the RVG contains a volume set (2808902)
- Plex reattach operation fails with unexpected kernel error in configuration update (2791241)
- Bunker replay does not occur with volume sets (3329970)
- SmartIO does not support write-back caching mode for volumes configured for replication by Volume Replicator (3313920)
- During moderate to heavy I/O, the vradmin verifydata command may falsely report differences in data (3270067)
- The vradmin repstatus command does not show that the SmartSync feature is running [3343141]
- While vradmin commands are running, vradmind may temporarily lose heartbeats (3347656, 3724338)
- Write I/Os on the primary logowner may take a long time to complete (2622536)
- DCM logs on a disassociated layered data volume results in configuration changes or CVM node reconfiguration issues (3582509)
- After performing a CVM master switch on the secondary node, both rlinks detach (3642855)
- vradmin -g dg repstatus rvg displays the following configuration error: vradmind not reachable on cluster peer (3648854)
- The RVGPrimary agent may fail to bring the application service group online on the new Primary site because of a previous primary-elect operation not being run or not completing successfully (3761555, 2043831)
- A snapshot volume created on the Secondary, containing a VxFS file system may not mount in read-write mode and performing a read-write mount of the VxFS file systems on the new Primary after a global clustering site failover may fail (1558257)
- Cluster Server known issues
- Operational issues for VCS
- LVM SG transition fails in all paths disabled status [2081430]
- SG goes into Partial state if Native LVMVG is imported and activated outside VCS control
- Some VCS components do not work on the systems where a firewall is configured to block TCP traffic
- Switching service group with DiskGroup resource causes reservation conflict with UseFence set to SCSI3 and powerpath environment set [2749136]
- Stale NFS file handle on the client across failover of a VCS service group containing LVMLogicalVolume resource (2016627)
- NFS cluster I/O fails when storage is disabled [2555662]
- VVR configuration may go in a primary-primary configuration when the primary node crashes and restarts [3314749]
- CP server does not allow adding and removing HTTPS virtual IP or ports when it is running [3322154]
- CP server does not support IPv6 communication with HTTPS protocol [3209475]
- VCS fails to stop volume due to a transaction ID mismatch error [3292840]
- Some VCS components do not work on the systems where a firewall is configured to block TCP traffic [3545338]
- Issues related to the VCS engine
- Invalid argument message in the message log due to Red Hat Linux bug (3872083)
- Extremely high CPU utilization may cause HAD to fail to heartbeat to GAB [1744854]
- The hacf -cmdtocf command generates a broken main.cf file [1919951]
- Trigger does not get executed when there is more than one leading or trailing slash in the triggerpath [2368061]
- Service group is not auto started on the node having incorrect value of EngineRestarted [2653688]
- Group is not brought online if top level resource is disabled [2486476]
- NFS resource goes offline unexpectedly and reports errors when restarted [2490331]
- Parent group does not come online on a node where child group is online [2489053]
- Cannot modify temp attribute when VCS is in LEAVING state [2407850]
- Service group may fail to come online after a flush and a force flush operation [2616779]
- Elevated TargetCount prevents the online of a service group with hagrp -online -sys command [2871892]
- Auto failover does not happen in case of two successive primary and secondary cluster failures [2858187]
- GCO clusters remain in INIT state [2848006]
- The ha commands may fail for non-root user if cluster is secure [2847998]
- Running -delete -keys for any scalar attribute causes core dump [3065357]
- Veritas Infoscale enters into admin_wait state when Cluster Statistics is enabled with load and capacity defined [3199210]
- Agent reports incorrect state if VCS is not set to start automatically and utmp file is empty before VCS is started [3326504]
- Log messages are seen on every systemctl transaction on RHEL7 [3609196]
- VCS crashes if feature tracking file is corrupt [3603291]
- RemoteGroup agent and non-root users may fail to authenticate after a secure upgrade [3649457]
- Global Cluster Option (GCO) require NIC names in specific format [3641586]
- If you disable security before upgrading VCS to version 7.0.1 or later on secured clusters, the security certificates will not be upgraded to 2048 bit SHA2 [3812313]
- Clusters with VCS versions earlier than 6.0.5 cannot form cross cluster communication (like GCO, STEWARD) with clusters installed with SHA256 signature certificates [3812313]
- Issues related to the bundled agents
- KVMGuest resource fails to work on VCS agent for RHEV3.5 (3873800)
- LVM Logical Volume will be auto activated during I/O path failure [2140342]
- KVMGuest monitor entry point reports resource ONLINE even for corrupted guest or with no OS installed inside guest [2394235]
- Concurrency violation observed during migration of monitored virtual machine [2755936]
- LVM logical volume may get stuck with reiserfs file system on SLES11 [2120133]
- KVMGuest resource comes online on failover target node when started manually [2394048]
- IMF registration fails for Mount resource if the configured MountPoint path contains spaces [2442598]
- DiskGroup agent is unable to offline the resource if volume is unmounted outside VCS
- RemoteGroup agent does not failover in case of network cable pull [2588807]
- VVR setup with FireDrill in CVM environment may fail with CFSMount Errors [2564411]
- CoordPoint agent remains in faulted state [2852872]
- RVGsnapshot agent does not work with volume sets created using vxvset [2553505]
- No log messages in engine_A.log if VCS does not find the Monitor program [2563080]
- No IPv6 support for NFS [2022174]
- KVMGuest agent fails to recognize paused state of the VM causing KVMGuest resource to fault [2796538]
- Concurrency violation observed when host is moved to maintenance mode [2735283]
- Logical volume resources fail to detect connectivity loss with storage when all paths are disabled in KVM guest [2871891]
- Resource does not appear ONLINE immediately after VM appears online after a restart [2735917]
- Unexpected behavior in VCS observed while taking the disk online [3123872]
- LVMLogicalVolume agent clean entry point fails to stop logical volume if storage connectivity is lost [3118820]
- VM goes into paused state if the source node loses storage connectivity during migration [3085214]
- Virtual machine goes to paused state during migration if the public network cable is pulled on the destination node [3080930]
- NFS resource faults on the node enabled with SELinux and where rpc.statd process may terminate when access is denied to the PID file [3248903]
- NFS client reports I/O error because of network split brain [3257399]
- Mount resource does not support spaces in the MountPoint and BlockDevice attribute values [3335304]
- Manual configuration of RHEVMInfo attribute of KVMGuest agent requires all its keys to be configured [3277994]
- NFS lock failover is not supported on Linux [3331646]
- SambaServer agent may generate core on Linux if LockDir attribute is changed to empty value while agent is running [3339231]
- Independent Persistent disk setting is not preserved during failover of virtual disks in VMware environment [3338702]
- LVMLogicalVolume resource goes in UNABLE TO OFFLINE state if native LVM volume group is exported outside VCS control [3606516]
- DiskGroup resource online may take time if it is configured along with VMwareDisks resource [3638242]
- SFCache Agent fails to enable caching if cache area is offline [3644424]
- RemoteGroup agent may stop working on upgrading the remote cluster in secure mode [3648886]
- VMwareDisks agent may fail to start or storage discovery may fail if SELinux is running in enforcing mode [3106376]
- Issues related to the VCS database agents
- ASMDG agent does not go offline if the management DB is running on the same (3856460)
- ASMDG on a particular does not go offline if its instances is being used by other database instances (3856450)
- Sometimes ASMDG reports as offline instead of faulted (3856454)
- The ASMInstAgent does not support having pfile/spfile for the ASM Instance on the ASM diskgroups
- VCS agent for ASM: Health check monitoring is not supported for ASMInst agent
- NOFAILOVER action specified for certain Oracle errors
- Oracle agent fails to offline pluggable database (PDB) resource with PDB in backup mode [3592142]
- Clean succeeds for PDB even as PDB staus is UNABLE to OFFLINE [3609351]
- Second level monitoring fails if user and table names are identical [3594962]
- Monitor entry point times out for Oracle PDB resources when CDB is moved to suspended state in Oracle 12.1.0.2 [3643582]
- Oracle agent fails to online and monitor Oracle instance if threaded_execution parameter is set to true [3644425]
- Issues related to the agent framework
- Agent framework cannot handle leading and trailing spaces for the dependent attribute (2027896)
- The agent framework does not detect if service threads hang inside an entry point [1442255]
- IMF related error messages while bringing a resource online and offline [2553917]
- Delayed response to VCS commands observed on nodes with several resources and system has high CPU usage or high swap usage [3208239]
- CFSMount agent may fail to heartbeat with VCS engine and logs an error message in the engine log on systems with high memory load [3060779]
- Logs from the script executed other than the agent entry point goes into the engine logs [3547329]
- Cluster Server agents for Volume Replicator known issues
- Issues related to Intelligent Monitoring Framework (IMF)
- Registration error while creating a Firedrill setup [2564350]
- IMF does not provide notification for a registered disk group if it is imported using a different name (2730774)
- Direct execution of linkamf displays syntax error [2858163]
- Error messages displayed during reboot cycles [2847950]
- Error message displayed when ProPCV prevents a process from coming ONLINE to prevent concurrency violation does not have I18N support [2848011]
- AMF displays StartProgram name multiple times on the console without a VCS error code or logs [2872064]
- Core dump observed when amfconfig is run with set and reset commands simultaneously [2871890]
- VCS engine shows error for cancellation of reaper when Apache agent is disabled [3043533]
- Terminating the imfd daemon orphans the vxnotify process [2728787]
- Agent cannot become IMF-aware with agent directory and agent file configured [2858160]
- ProPCV fails to prevent a script from running if it is run with relative path [3617014]
- Issues related to global clusters
- Issues related to the Cluster Manager (Java Console)
- VCS Cluster Configuration wizard issues
- VCS Cluster Configuration wizard does not automatically close in Mozilla Firefox [3281450]
- Configuration inputs page of VCS Cluster Configuration wizard shows multiple cluster systems for the same virtual machine [3237023]
- VCS Cluster Configuration wizard fails to display mount points on native LVM if volume groups are exported [3341937]
- IPv6 verification fails while configuring generic application using VCS Cluster Configuration wizard [3614680]
- LLT known issues
- LLT may fail to detect when bonded NICs come up (2604437)
- LLT connections are not formed when a vlan is configured on a NIC (2484856)
- LLT port stats sometimes shows recvcnt larger than recvbytes (1907228)
- LLT may incorrectly declare port-level connection for nodes in large cluster configurations [1810217]
- If you manually re-plumb (change) the IP address on a network interface card (NIC) which is used by LLT, then LLT may experience heartbeat loss and the node may panic (3188950)
- A network restart of the network interfaces may cause heartbeat loss for the NIC interfaces used by LLT
- When you execute the /etc/init.d/llt start script to load the LLT module, the syslog file may record messages related to kernel symbols associated with Infiniband (3136418)
- Performance degradation occurs when RDMA connection between nodes is down [3877863]
- I/O fencing known issues
- One or more nodes in a cluster panic when a node in the cluster is ungracefully shutdown or rebooted [3750577]
- The cpsadm command fails after upgrading CP server to 6.0 or above in secure mode (2846727)
- CP server repetitively logs unavailable IP addresses (2530864)
- Fencing port b is visible for few seconds even if cluster nodes have not registered with CP server (2415619)
- The cpsadm command fails if LLT is not configured on the application cluster (2583685)
- In absence of cluster details in CP server, VxFEN fails with pre-existing split-brain message (2433060)
- The vxfenswap utility does not detect failure of coordination points validation due to an RSH limitation (2531561)
- Fencing does not come up on one of the nodes after a reboot (2573599)
- Common product installer cannot setup trust between a client system on release version 5.1SP1 and a server on release version 6.0 or later [3226290]
- Hostname and username are case sensitive in CP server (2846392)
- Server-based fencing comes up incorrectly if default port is not mentioned (2403453)
- Secure CP server does not connect from localhost using 127.0.0.1 as the IP address (2554981)
- Unable to customize the 30-second duration (2551621)
- CoordPoint agent does not report the addition of new disks to a Coordinator disk group [2727672]
- Fencing may show the RFSM state as replaying for some nodes in the cluster (2555191)
- The vxfenswap utility deletes comment lines from the /etc/vxfemode file, if you run the utility with hacli option (3318449)
- When you configure CP server only for HTTPS-based communication, the engine_A.log displays a misleading message (3321101)
- The vxfentsthdw utility may not run on systems installed with partial SFHA stack [3333914]
- When a client node goes down, for reasons such as node panic, I/O fencing does not come up on that client node after node restart (3341322)
- VCS fails to take virtual machines offline while restarting a physical host in RHEV and KVM environments (3320988)
- Fencing may panic the node while shut down or restart when LLT network interfaces are under Network Manager control [3627749]
- The vxfenconfig -l command output does not list Coordinator disks that are removed using the vxdmpadm exclude dmpnodename=<dmp_disk/node> command [3644431]
- Coordination point server-based fencing may fail if it is configured on 5.1SP1RP1 using 6.0.1 coordination point servers (3226290)
- The CoordPoint agent faults after you detach or reattach one or more coordination disks from a storage array (3317123)
- The upper bound value of FaultTolerance attribute of CoordPoint agent should be less than the majority of the coordination points. (2846389)
- The vxfenswap utility deletes comment lines from the /etc/vxfemode file, if you run the utility with hacli option (3318449)
- GAB known issues
- Operational issues for VCS
- Storage Foundation and High Availability known issues
- Cache area is lost after a disk failure (3158482)
- Installer exits upgrade to 5.1 RP1 with Rolling Upgrade error message (1951825, 1997914)
- In an IPv6 environment, db2icrt and db2idrop commands return a segmentation fault error during instance creation and instance removal (1602444)
- Process start-up may hang during configuration using the installer (1678116)
- Oracle 11gR1 may not work on pure IPv6 environment (1819585)
- Not all the objects are visible in the VOM GUI (1821803)
- An error message is received when you perform off-host clone for RAC and the off-host node is not part of the CVM cluster (1834860)
- A volume's placement class tags are not visible in the Veritas Enterprise Administrator GUI when creating a dynamic storage tiering placement policy (1880081)
- Storage Foundation Cluster File System High Availability known issues
- After the local node restarts or panics, the FSS service group cannot be online successfully on the local node and the remote node when the local node is up again (3865289)
- In the FSS environment, if DG goes to the dgdisable state and deep volume monitoring is disabled, successive node joins fail with error 'Slave failed to create remote disk: retry to add a node failed' (3874730)
- DG creation fails with error "V-5-1-585 Disk group punedatadg: cannot create: SCSI-3 PR operation failed" on the VSCSI disks (3875044)
- Write back cache is not supported on the cluster in FSS scenario [3723701]
- CVMVOLDg agent is not going into the FAULTED state. [3771283]
- On CFS, SmartIO is caching writes although the cache appears as nocache on one node (3760253)
- Unmounting the checkpoint using cfsumount(1M) may fail if SElinux is in enforcing mode [3766074]
- tail -f run on a cluster file system file only works correctly on the local node [3741020]
- In SFCFS on Linux, stack may overflow when the system creates ODM file [3758102]
- CFS commands might hang when run by non-root (3038283)
- The fsappadm subfilemove command moves all extents of a file (3258678)
- Certain I/O errors during clone deletion may lead to system panic. (3331273)
- Panic due to null pointer de-reference in vx_bmap_lookup() (3038285)
- In a CFS cluster, that has multi-volume file system of a small size, the fsadm operation may hang (3348520)
- Storage Foundation for Oracle RAC known issues
- Oracle RAC known issues
- Storage Foundation Oracle RAC issues
- When you upgrade to SF Oracle RAC 7.1, VxFS may fail to stop (3872605)
- ASM disk groups configured with normal or high redundancy are dismounted if the CVM master panics due to network failure in FSS environment or if CVM I/O shipping is enabled (3600155)
- PrivNIC and MultiPrivNIC agents not supported with Oracle RAC 11.2.0.2 and later versions
- CSSD agent forcibly stops Oracle Clusterware if Oracle Clusterware fails to respond (3352269)
- Intelligent Monitoring Framework (IMF) entry point may fail when IMF detects resource state transition from online to offline for CSSD resource type (3287719)
- Node fails to join the SF Oracle RAC cluster if the file system containing Oracle Clusterware is not mounted (2611055)
- The vxconfigd daemon fails to start after machine reboot (3566713)
- Health check monitoring fails with policy-managed databases (3609349)
- Issue with format of the last 8-bit number in private IP addresses (1164506)
- CVMVolDg agent may fail to deport CVM disk group
- Rolling upgrade not supported for upgrades from SF Oracle RAC 5.1 SP1 with fencing configured in dmpmode.
- "Configuration must be ReadWrite : Use haconf -makerw" error message appears in VCS engine log when hastop -local is invoked (2609137)
- Veritas Volume Manager can not identify Oracle Automatic Storage Management (ASM) disks (2771637)
- vxdisk resize from slave nodes fails with "Command is not supported for command shipping" error (3140314)
- CVR configurations are not supported for Flexible Storage Sharing (3155726)
- CVM requires the T10 vendor provided ID to be unique (3191807)
- SG_IO ioctl hang causes disk group creation, CVM node joins, and storage connects/disconnects, and vxconfigd to hang in the kernel (3193119)
- vxdg adddisk operation fails when adding nodes containing disks with the same name (3301085)
- FSS Disk group creation with 510 exported disks from master fails with Transaction locks timed out error (3311250)
- vxconfigrestore is unable to restore FSS cache objects in the pre-commit stage (3461928)
- Change in naming scheme is not reflected on nodes in an FSS environment (3589272)
- Intel SSD cannot be initialized and exported (3584762)
- VxVM may report false serial split brain under certain FSS scenarios (3565845)
- Storage Foundation for Databases (SFDB) tools known issues
- Sometimes SFDB may report the following error message: SFDB remote or privileged command error (2869262)
- SFDB commands do not work in IPV6 environment (2619958)
- When you attempt to move all the extents of a table, the dbdst_obj_move(1M) command fails with an error (3260289)
- Attempt to use SmartTier commands fails (2332973)
- Attempt to use certain names for tiers results in error (2581390)
- Clone operation failure might leave clone database in unexpected state (2512664)
- Clone command fails if PFILE entries have their values spread across multiple lines (2844247)
- Clone command errors in a Data Guard environment using the MEMORY_TARGET feature for Oracle 11g (1824713)
- Clone fails with error "ORA-01513: invalid current time returned by operating system" with Oracle 11.2.0.3 (2804452)
- Data population fails after datafile corruption, rollback, and restore of offline checkpoint (2869259)
- Flashsnap clone fails under some unusual archivelog configuration on RAC (2846399)
- In the cloned database, the seed PDB remains in the mounted state (3599920)
- Cloning of a container database may fail after a reverse resync commit operation is performed (3509778)
- If one of the PDBs is in the read-write restricted state, then cloning of a CDB fails (3516634)
- Cloning of a CDB fails for point-in-time copies when one of the PDBs is in the read-only mode (3513432)
- If a CDB has a tablespace in the read-only mode, then the cloning fails (3512370)
- If any SFDB installation with authentication setup is upgraded to 7.1, the commands fail with an error (3644030)
- Storage Foundation for Sybase ASE CE known issues
- Sybase Agent Monitor times out (1592996)
- Installer warning (1515503)
- Unexpected node reboot while probing a Sybase resource in transition (1593605)
- Unexpected node reboot when invalid attribute is given (2567507)
- "Configuration must be ReadWrite : Use haconf -makerw" error message appears in VCS engine log when hastop -local is invoked (2609137)
- Issues related to installation and upgrade
- Software Limitations
- Virtualization software limitations
- Storage Foundation software limitations
- Dynamic Multi-Pathing software limitations
- Veritas Volume Manager software limitations
- Snapshot configuration with volumes in shared disk groups and private disk groups is not supported (2801037)
- Storage reclamation does not happen on volumes with break-off snapshot (2798523)
- SmartSync is not supported for Oracle databases running on raw VxVM volumes
- Veritas Infoscale does not support thin reclamation of space on a linked mirror volume (2729563)
- Cloned disks operations not supported for FSS disk groups
- Thin reclamation requests are not redirected even when the ioship policy is enabled (2755982)
- Veritas Operations Manager does not support disk, disk group, and volume state information related to CVM I/O shipping feature (2781126)
- Veritas File System software limitations
- Limitations while managing Docker containers
- Linux I/O Scheduler for Database Workloads
- Recommended limit of number of files in a directory
- The vxlist command cannot correctly display numbers greater than or equal to 1 EB
- Limitations with delayed allocation for extending writes feature
- FlashBackup feature of NetBackup 7.5 (or earlier) does not support disk layout Version 8, 9, or 10
- Compressed files that are backed up using NetBackup 7.1 or prior become uncompressed when you restore the files
- On SUSE, creation of a SmartIO cache of VxFS type hangs on Fusion-io device (3200586)
- A NetBackup restore operation on VxFS file systems does not work with SmartIO writeback caching
- VxFS file system writeback operation is not supported with volume level replication or array level replication
- SmartIO software limitations
- Replication software limitations
- Cluster Server software limitations
- Limitations related to bundled agents
- Programs using networked services may stop responding if the host is disconnected
- Volume agent clean may forcibly stop volume resources
- False concurrency violation when using PidFiles to monitor application resources
- Mount agent limitations
- Share agent limitations
- Volumes in a disk group start automatically irrespective of the value of the StartVolumes attribute in VCS [2162929]
- Application agent limitations
- Campus cluster fire drill does not work when DSM sites are used to mark site boundaries [3073907]
- Mount agent reports resource state as OFFLINE if the configured mount point does not exist [3435266]
- Limitation of VMwareDisks agent to communicate with the vCenter Server [3528649]
- Limitations related to VCS engine
- Loads fail to consolidate and optimize when multiple groups fault [3074299]
- Preferred fencing ignores the forecasted available capacity [3077242]
- Failover occurs within the SystemZone or site when BiggestAvailable policy is set [3083757]
- Load for Priority groups is ignored in groups with BiggestAvailable and Priority in the same group[3074314]
- Veritas cluster configuration wizard limitations
- Limitations related to IMF
- Limitations related to the VCS database agents
- Security-Enhanced Linux is not supported on SLES distributions
- Systems in a cluster must have same system locale setting
- VxVM site for the disk group remains detached after node reboot in campus clusters with fire drill [1919317]
- Limitations with DiskGroupSnap agent [1919329]
- System reboot after panic
- Host on RHEV-M and actual host must match [2827219]
- Cluster Manager (Java console) limitations
- Limitations related to I/O fencing
- Preferred fencing limitation when VxFEN activates RACER node re-election
- Stopping systems in clusters with I/O fencing configured
- Uninstalling VRTSvxvm causes issues when VxFEN is configured in SCSI3 mode with dmp disk policy (2522069)
- Node may panic if HAD process is stopped by force and then node is shut down or restarted [3640007]
- Limitations related to global clusters
- Clusters must run on VCS 6.0.5 and later to be able to communicate after upgrading to 2048 bit key and SHA256 signature certificates [3812313]
- Limitations related to bundled agents
- Storage Foundation Cluster File System High Availability software limitations
- Storage Foundation for Oracle RAC software limitations
- Supportability constraints for normal or high redundancy ASM disk groups with CVM I/O shipping and FSS (3600155)
- Limitations of CSSD agent
- Oracle Clusterware/Grid Infrastructure installation fails if the cluster name exceeds 14 characters
- SELinux supported in disabled and permissive modes only
- Policy-managed databases not supported by CRSResource agent
- Health checks may fail on clusters that have more than 10 nodes
- Cached ODM not supported in Veritas Infoscale environments
- Storage Foundation for Databases (SFDB) tools software limitations
- Storage Foundation for Sybase ASE CE software limitations
- Documentation
Required Linux RPMs for Veritas Infoscale
Make sure you install the following operating system-specific RPMs on the systems where you want to install or upgrade Veritas Infoscale. Veritas Infoscale will support any updates made to the following RPMs, provided the RPMs maintain the ABI compatibility.
Table: Required RPMs lists the RPMs that Veritas Infoscale products require for a given Linux operating system.
Note:
The required RPM versions should be equal or later than the list in the following table.
Table: Required RPMs
Operating system | Required RPMs |
|---|---|
RHEL 7 Note: Veritas recommends that you install RHEL 7 as the operating system of Server GUI. | bc-1.06.95-13.el7.x86_64 coreutils-8.22-11.el7.x86_64 ed-1.9-4.el7.x86_64 findutils-4.5.11-3.el7.x86_64 glibc-2.17-55.el7.i686 glibc-2.17-55.el7.x86_64 kmod-14-9.el7.x86_64 ksh-20120801-19.el7.x86_64 libacl-2.2.51-12.el7.i686 libacl-2.2.51-12.el7.x86_64 libgcc-4.8.2-16.el7.x86_64 libhbaapi-2.2.9-5.el7.x86_64 libstdc++-4.8.2-16.el7.x86_64 ncurses-libs-5.9-13.20130511.el7.x86_64 nss-softokn-freebl-3.15.4-2.el7.i686 openssl-libs-1.0.1e-42.el7.x86_64 parted-3.1-17.el7.x86_64 perl-5.16.3-283.el7.x86_64 perl-Exporter-5.68-3.el7.noarch perl-Socket-2.010-3.el7.x86_64 policycoreutils-2.2.5-11.el7.x86_64 |
RHEL 7.1 |
bc-1.06.95-13.el7.x86_64 coreutils-8.22-11.el7.x86_64 ed-1.9-4.el7.x86_64 findutils-4.5.11-3.el7.x86_64 glibc-2.17-78.el7.i686 glibc-2.17-78.el7.x86_64 kmod-14-10.el7.x86_64 ksh-20120801-22.el7.x86_64 libacl-2.2.51-12.el7.i686 libacl-2.2.51-12.el7.x86_64 libgcc-4.8.3-9.el7.x86_64 libhbaapi-2.2.9-6.el7.x86_64 libstdc++-4.8.3-9.el7.x86_64 ncurses-libs-5.9-13.20130511.el7.x86_64 nss-softokn-freebl-3.16.2.3-9.el7.i686 openssl-libs-1.0.1e-42.el7.x86_64 parted-3.1-20.el7.x86_64 perl-5.16.3-285.el7.x86_64 perl-Exporter-5.68-3.el7.noarch perl-Socket-2.010-3.el7.x86_64 policycoreutils-2.2.5-15.el7.x86_64 |
RHEL 7.2 | bc-1.06.95-13.el7.x86_64 coreutils-8.22-15.el7.x86_64 ed-1.9-4.el7.x86_64 findutils-4.5.11-5.el7.x86_64 glibc-2.17-105.el7.i686 glibc-2.17-105.el7.x86_64 kmod-20-5.el7.x86_64 ksh-20120801-22.el7_1.2.x86_64 libacl-2.2.51-12.el7.i686 libacl-2.2.51-12.el7.x86_64 libgcc-4.8.5-4.el7.x86_64 libhbaapi-2.2.9-6.el7.x86_64 libstdc++-4.8.5-4.el7.x86_64 ncurses-libs-5.9-13.20130511.el7.x86_64 nss-softokn-freebl-3.16.2.3-13.el7_1.i686 openssl-libs-1.0.1e-42.el7.x86_64 parted-3.1-23.el7.x86_64 perl-5.16.3-286.el7.x86_64 perl-Exporter-5.68-3.el7.noarch perl-Socket-2.010-3.el7.x86_64 policycoreutils-2.2.5-20.el7.x86_64 |
OL 7 Note: Veritas recommends that you install RHEL 7 as the operating system of Server GUI. | bc-1.06.95-13.el7.x86_64 coreutils-8.22-11.0.1.el7.x86_64 ed-1.9-4.el7.x86_64 findutils-4.5.11-3.el7.x86_64 glibc-2.17-55.el7.i686 glibc-2.17-55.el7.x86_64 kmod-14-9.el7.x86_64 ksh-20120801-19.el7.x86_64 libacl-2.2.51-12.el7.i686 libacl-2.2.51-12.el7.x86_64 libgcc-4.8.2-16.el7.x86_64 libhbaapi-2.2.9-5.el7.x86_64 libstdc++-4.8.2-16.el7.x86_64 ncurses-libs-5.9-13.20130511.el7.x86_64 nss-softokn-freebl-3.15.4-2.el7.i686 openssl-libs-1.0.1e-34.el7.x86_64 openssl-libs-1.0.1e-42.el7.x86_64 parted-3.1-17.el7.x86_64 perl-5.16.3-283.el7.x86_64 perl-Exporter-5.68-3.el7.noarch perl-Socket-2.010-3.el7.x86_64 policycoreutils-2.2.5-11.0.1.el7.x86_64 |
OL 7.1 | bc-1.06.95-13.el7.x86_64 coreutils-8.22-11.0.1.el7.x86_64 ed-1.9-4.el7.x86_64 findutils-4.5.11-3.el7.x86_64 glibc-2.17-78.0.1.el7.i686 glibc-2.17-78.0.1.el7.x86_64 glibc-2.17-78.el7.x86_64 kmod-14-10.el7.x86_64 ksh-20120801-22.el7.x86_64 ksh-20120801-22.el7_1.2.x86_64 libacl-2.2.51-12.el7.i686 libacl-2.2.51-12.el7.x86_64 libgcc-4.8.3-9.el7.x86_64 libhbaapi-2.2.9-6.el7.x86_64 libstdc++-4.8.3-9.el7.x86_64 ncurses-libs-5.9-13.20130511.el7.x86_64 nss-softokn-freebl-3.16.2.3-9.el7.i686 openssl-libs-1.0.1e-42.el7.x86_64 parted-3.1-20.el7.x86_64 perl-5.16.3-285.el7.x86_64 perl-Exporter-5.68-3.el7.noarch perl-Socket-2.010-3.el7.x86_64 policycoreutils-2.2.5-15.0.1.el7.x86_64 |
OL 7.2 | bc-1.06.95-13.el7.x86_64 coreutils-8.22-15.0.1.el7.x86_64 ed-1.9-4.el7.x86_64 findutils-4.5.11-5.el7.x86_64 glibc-2.17-105.0.1.el7.i686 glibc-2.17-105.0.1.el7.x86_64 kmod-20-5.el7.x86_64 ksh-20120801-22.el7_1.2.x86_64 libacl-2.2.51-12.el7.i686 libacl-2.2.51-12.el7.x86_64 libgcc-4.8.5-4.el7.x86_64 libhbaapi-2.2.9-6.el7.x86_64 libstdc++-4.8.5-4.el7.i686 libstdc++-4.8.5-4.el7.x86_64 ncurses-libs-5.9-13.20130511.el7.x86_64 openssl-libs-1.0.1e-42.el7_1.9.x86_64 parted-3.1-23.el7.x86_64 perl-5.16.3-286.el7.x86_64 perl-Exporter-5.68-3.el7.noarch perl-Socket-2.010-3.el7.x86_64 policycoreutils-2.2.5-20.0.1.el7.x86_64 |
OL 7 UEK 3 | glibc-2.17-55.el7.x86_64 glibc-2.17-55.el7.i686 ksh-20120801-19.el7.x86_64 libgcc-4.8.2-16.el7.i686 libstdc++-4.8.2-16.el7.i686 perl-Exporter-5.68-3.el7.noarch perl-5.16.3-283.el7.x86_64 |
OL 6.4 | coreutils-8.4-19.0.1.el6.x86_64 ed-1.1-3.3.el6.x86_64 findutils-4.4.2-6.el6.x86_64 glibc-2.12-1.107.el6.i686 glibc-2.12-1.107.el6.x86_64 ksh-20100621-19.el6.x86_64 libacl-2.2.49-6.el6.x86_64 libgcc-4.4.7-3.el6.x86_64 libhbaapi-2.2.6-1.el6.x86_64 libstdc++-4.4.7-3.el6.x86_64 module-init-tools-3.9-21.0.1.el6.x86_64 ncurses-libs-5.7-3.20090208.el6.x86_64 openssl-1.0.0-27.el6.x86_64 parted-2.1-19.el6.x86_64 perl-5.10.1-129.el6.x86_64 policycoreutils-2.0.83-19.30.0.1.el6.x86_64 readline-6.0-4.el6.x86_64 |
OL 6.5 | coreutils-8.4-31.0.1.el6.x86_64 ed-1.1-3.3.el6.x86_64 findutils-4.4.2-6.el6.x86_64 glibc-2.12-1.132.el6.i686 glibc-2.12-1.132.el6.x86_64 ksh-20120801-10.el6.x86_64 libacl-2.2.49-6.el6.x86_64 libgcc-4.4.7-4.el6.x86_64 libhbaapi-2.2.9-1.el6.x86_64 libstdc++-4.4.7-4.el6.x86_64 module-init-tools-3.9-21.0.1.el6_4.x86_64 ncurses-libs-5.7-3.20090208.el6.x86_64 openssl-1.0.1e-15.el6.x86_64 parted-2.1-21.el6.x86_64 perl-5.10.1-136.el6.x86_64 policycoreutils-2.0.83-19.39.0.1.el6.x86_64 readline-6.0-4.el6.x86_64 |
OL 6.6 | coreutils-8.4-37.el6.x86_64 ed-1.1-3.3.el6.x86_64 findutils-4.4.2-6.el6.x86_64 glibc-2.12-1.149.el6.i686 glibc-2.12-1.149.el6.x86_64 ksh-20120801-21.el6.x86_64 libacl-2.2.49-6.el6.x86_64 libgcc-4.4.7-11.el6.x86_64 libhbaapi-2.2.9-1.el6.x86_64 libstdc++-4.4.7-11.el6.x86_64 module-init-tools-3.9-24.el6.x86_64 ncurses-libs-5.7-3.20090208.el6.x86_64 openssl-1.0.1e-30.el6.x86_64 parted-2.1-25.el6.x86_64 perl-5.10.1-136.el6.x86_64 policycoreutils-2.0.83-19.47.el6.x86_64 readline-6.0-4.el6.x86_64 |
OL 6.7 | coreutils-8.4-37.el6.x86_64 ed-1.1-3.3.el6.x86_64 findutils-4.4.2-6.el6.x86_64 glibc-2.12-1.166.el6.i686 glibc-2.12-1.166.el6.x86_64 ksh-20120801-28.el6.x86_64 libacl-2.2.49-6.el6.x86_64 libgcc-4.4.7-16.el6.x86_64 libhbaapi-2.2.9-1.el6.x86_64 libstdc++-4.4.7-16.el6.x86_64 module-init-tools-3.9-25.el6.x86_64 ncurses-libs-5.7-4.20090207.el6.x86_64 openssl-1.0.1e-42.el6.x86_64 parted-2.1-29.el6.x86_64 perl-5.10.1-141.el6.x86_64 policycoreutils-2.0.83-24.el6.x86_64 readline-6.0-4.el6.x86_64 |
RHEL 6.4 | coreutils-8.4-19.el6.x86_64 ed-1.1-3.3.el6.x86_64 findutils-4.4.2-6.el6.x86_64 glibc-2.12-1.107.el6.i686 glibc-2.12-1.107.el6.x86_64 ksh-20100621-19.el6.x86_64 libacl-2.2.49-6.el6.x86_64 libgcc-4.4.7-3.el6.x86_64 libhbaapi-2.2.6-1.el6.x86_64 libstdc++-4.4.7-3.el6.x86_64 module-init-tools-3.9-21.el6.x86_64 ncurses-libs-5.7-3.20090208.el6.x86_64 openssl-1.0.0-27.el6.x86_64 parted-2.1-19.el6.x86_64 perl-5.10.1-129.el6.x86_64 policycoreutils-2.0.83-19.30.el6.x86_64 readline-6.0-4.el6.x86_64 |
RHEL 6.5 | coreutils-8.4-31.el6.x86_64 ed-1.1-3.3.el6.x86_64 findutils-4.4.2-6.el6.x86_64 glibc-2.12-1.132.el6.i686 glibc-2.12-1.132.el6.x86_64 ksh-20120801-10.el6.x86_64 libacl-2.2.49-6.el6.x86_64 libgcc-4.4.7-4.el6.x86_64 libhbaapi-2.2.9-1.el6.x86_64 libstdc++-4.4.7-4.el6.x86_64 module-init-tools-3.9-21.el6_4.x86_64 ncurses-libs-5.7-3.20090208.el6.x86_64 openssl-1.0.1e-15.el6.x86_64 parted-2.1-21.el6.x86_64 perl-5.10.1-136.el6.x86_64 policycoreutils-2.0.83-19.39.el6.x86_64 readline-6.0-4.el6.x86_64 |
RHEL 6.6 | coreutils-8.4-37.el6.x86_64 ed-1.1-3.3.el6.x86_64 findutils-4.4.2-6.el6.x86_64 glibc-2.12-1.149.el6.i686 glibc-2.12-1.149.el6.x86_64 ksh-20120801-21.el6.x86_64 libacl-2.2.49-6.el6.x86_64 libgcc-4.4.7-11.el6.x86_64 libhbaapi-2.2.9-1.el6.x86_64 libstdc++-4.4.7-11.el6.x86_64 module-init-tools-3.9-24.el6.x86_64 ncurses-libs-5.7-3.20090208.el6.x86_64 openssl-1.0.1e-30.el6.x86_64 parted-2.1-25.el6.x86_64 perl-5.10.1-136.el6.x86_64 policycoreutils-2.0.83-19.47.el6.x86_64 readline-6.0-4.el6.x86_64 |
RHEL 6.7 | coreutils-8.4-37.el6.x86_64 ed-1.1-3.3.el6.x86_64 findutils-4.4.2-6.el6.x86_64 glibc-2.12-1.166.el6.i686 glibc-2.12-1.166.el6.x86_64 ksh-20120801-28.el6.x86_64 libacl-2.2.49-6.el6.x86_64 libgcc-4.4.7-16.el6.x86_64 libhbaapi-2.2.9-1.el6.x86_64 libstdc++-4.4.7-16.el6.x86_64 module-init-tools-3.9-25.el6.x86_64 ncurses-libs-5.7-4.20090207.el6.x86_64 openssl-1.0.1e-42.el6.x86_64 parted-2.1-29.el6.x86_64 perl-5.10.1-141.el6.x86_64 policycoreutils-2.0.83-24.el6.x86_64 |
SLES 11 SP3 | coreutils-8.12-6.25.27.1.x86_64 ed-0.2-1001.30.1.x86_64 findutils-4.4.0-38.26.1.x86_64 glibc-2.11.3-17.54.1.x86_64 glibc-32bit-2.11.3-17.54.1.x86_64 ksh-93u-0.18.1.x86_64 libHBAAPI2-2.2.9-0.9.37.x86_64 libacl-2.2.47-30.34.29.x86_64 libacl-32bit-2.2.47-30.34.29.x86_64 libgcc_s1-32bit-4.7.2_20130108-0.15.45.x86_64 libgcc_s1-4.7.2_20130108-0.15.45.x86_64 libncurses5-5.6-90.55.x86_64 libstdc++6-32bit-4.7.2_20130108-0.15.45.x86_64 libstdc++6-4.7.2_20130108-0.15.45.x86_64 module-init-tools-3.11.1-1.28.5.x86_64 parted-2.3-10.38.16.x86_64 |
SLES 11 SP4 | coreutils-8.12-6.25.32.33.1.x86_64 ed-0.2-1001.30.1.x86_64 findutils-4.4.0-38.26.1.x86_64 glibc-2.11.3-17.84.1.x86_64 glibc-32bit-2.11.3-17.84.1.x86_64 ksh-93u-0.26.1.x86_64 libHBAAPI2-2.2.9-0.9.37.x86_64 libacl-2.2.47-30.36.1.x86_64 libacl-32bit-2.2.47-30.36.1.x86_64 libgcc_s1-32bit-4.8.3+r212056-2.17.x86_64 libgcc_s1-4.8.3+r212056-2.17.x86_64 libncurses5-5.6-90.55.x86_64 libstdc++6-32bit-4.8.3+r212056-2.17.x86_64 libstdc++6-4.8.3+r212056-2.17.x86_64 module-init-tools-3.11.1-31.25.x86_64 parted-2.3-10.38.16.x86_64 |
SLES 12 | coreutils-8.22-5.17.x86_64 ed-1.9-3.63.x86_64 findutils-4.5.12-5.124.x86_64 glibc-2.19-17.72.x86_64 glibc-32bit-2.19-17.72.x86_64 kmod-compat-17-1.18.x86_64 libHBAAPI2-2.2.9-1.39.x86_64 libacl1-2.2.52-3.148.x86_64 libacl1-32bit-2.2.52-3.148.x86_64 libgcc_s1-4.8.3+r212056-6.3.x86_64 libopenssl1_0_0-1.0.1i-2.12.x86_64 libreadline6-6.2-75.2.x86_64 libstdc++6-4.8.3+r212056-6.3.x86_64 mksh-50-2.13.x86_64 parted-3.1-13.1.x86_64 |
SLES 12 SP1 | coreutils-8.22-9.1.x86_64 ed-1.9-3.63.x86_64 findutils-4.5.12-5.124.x86_64 glibc-2.19-31.9.x86_64 glibc-32bit-2.19-31.9.x86_64 kmod-compat-17-1.18.x86_64 libHBAAPI2-2.2.10-1.2.x86_64 libacl1-2.2.52-3.148.x86_64 libacl1-32bit-2.2.52-3.148.x86_64 libgcc_s1-5.2.1+r226025-4.1.x86_64 libreadline6-6.2-75.2.x86_64 libstdc++6-5.2.1+r226025-4.1.x86_64 mksh-50-2.13.x86_64 parted-3.1-13.1.x86_64 |