Veritas NetBackup™ 5330 Appliance Product Description

Operating system

Red Hat Enterprise Linux 7.4

Performance

Storage capacity

Up to 960 TiB (1,056 TB) for MSDP deduplication data storage, and up to 1.374 PB for AdvancedDisk and Copilot non-deduplicated data storage. The amount of MSDP or AdvancedDisk/Copilot data storage you want to allocate depends on the amount of storage that you purchase with the NetBackup 5330 Appliance.

You can allocate the usable storage capacity in part or completely to an MSDP deduplication pool, or to an AdvancedDisk or Copilot non-deduplicated storage pool.

System memory configuration (DIMMs)

16 GB x 24; total RAM: 384 GB

RAID cache

24 GB

Space reduction

The deduplication engine provides up to 100 times reduction in storage. The client-side plug-in provides similar levels of bandwidth reduction.

Scalable architecture

See Available appliance storage options.

High availability

Supports redundant hot-swappable disks and power modules.

Easy management

Provides separate out-of-band management network interfaces. You can remotely turn on, turn off, and reset appliances through the network.

Supports the SNMP traps and automatically reports alarms.

Reports disk information through the out-of-band management channel.

RAID levels

Fibre Channel support

The NetBackup 5330 compute node can be ordered with two, three, five, or six Fibre Channel (FC) HBA cards already installed. Each card includes two standard Fibre Channel ports. If less than six FC HBA cards are ordered, a 10 Gb Ethernet card with two standard ports can be ordered. The compute node uses the QLE2562, a QLogic 8 Gb FC PCIe dual port adapter.

Rear panel ports

One 1 Gb/s IPMI remote network port

One VGA port

Four 1 GbE network ports, with an RJ-45 connector, and link and activity LEDs. Two of the ports are reserved for private networks.

Two 10 GbE network ports, with Small Form-factor Pluggable (SFP) modules, and link and activity LEDs.

See About the NetBackup 5330 Appliance compute node rear panel.