Veritas NetBackup™ 5330 Appliance Product Description

Last Published:
Product(s): Appliances (5330 3.0)

NetBackup 5330 Appliance system features

Table: NetBackup 5330 Appliance system features

Feature

Description

Performance

Processors

  • Two Intel Xeon 10 core 2.80GHz E5-2680 v2 CPUs

    or

    Two Intel Xeon 10 core 3.00GHz E5-2690 v2 CPUs

  • Supports high-performance processors with low-power consumption.

  • Provides high-capacity intra-appliance switching bandwidth, along with high I/O throughput.

  • Available storage capacity can be any combination of up to 229 TB. The available capacity can be allocated either in part or in whole to a deduplication pool or to an AdvancedDisk pool (non-deduplicated storage).

System memory configuration (DIMMs)

16 GB x 24; total RAM: 384 GB

RAID cache

24 GB

Space reduction

The deduplication engine provides up to 100 times reduction in storage. The client-side plug-in provides similar levels of bandwidth reduction.

Scalable architecture

Due to fingerprinting and RAID redundancy, the overall storage capabilities are not a simple multiplication of the disk size and the total number of disks.

The NetBackup 5330 Appliance consists of a compute node and one Primary Storage Shelf. You can add additional storage to the system by adding up to two Expansion Storage Shelves. Depending on the storage option you purchase, a NetBackup 5330 Appliance system can provide up to 687 TBs of available storage capacity.

See Available appliance storage options.

High availability

Supports redundant hot-swappable disks and power modules.

Easy management

Provides separate out-of-band management network interfaces. You can remotely turn on, turn off, and reset appliances through the network.

Supports the SNMP traps and automatically reports alarms.

Reports disk information through the out-of-band management channel.

RAID levels

RAID1 (striping and mirroring) and RAID6 (block level striping with double distributed parity) are used as follows:

  • NetBackup 5330 compute node system disks: RAID1

  • Storage shelf data storage disks: RAID6

Fibre Channel support

The NetBackup 5330 compute node can be ordered with two, three, five, or six Fibre Channel (FC) HBA cards already installed. Each card includes two standard Fibre Channel ports. If less than six FC HBA cards are ordered, a 10 Gb Ethernet card with two standard ports can be ordered. The compute node uses the QLE2562, a QLogic 8 Gb FC PCIe dual port adapter.

Rear panel ports

One 1 Gb/s IPMI remote network port

One VGA port

Four 1 GbE network ports, with an RJ-45 connector, and link and activity LEDs. Two of the ports are reserved for private networks.

Two 10 GbE network ports, with Small Form-factor Pluggable (SFP) modules, and link and activity LEDs.

See About the NetBackup 5330 Appliance compute node rear panel.

See NetBackup 5330 Appliance compute node disk drive configurations.

See NetBackup 5330 Appliance compute node disk drive LED descriptions.

See NetBackup 5330 Appliance compute node control panel information.

See About the NetBackup 5330 Appliance compute node rear panel.

See NetBackup 5330 Appliance compute node PCIe slot I/O configuration options.

See NetBackup 5330 Appliance compute node Ethernet port configurations.

See Dual-port 8 Gb Fibre Channel Host Bus Adapter (FC HBA) specifications.