Veritas NetBackup™ Status Codes Reference Guide
- NetBackup status codes
- NetBackup status codes
- NetBackup KMS status codes
- NetBackup status codes
- Media Manager status codes
- Media Manager status codes
- Media Manager status codes
- Device configuration status codes
- Device configuration status codes
- Device configuration status codes
- Device management status codes
- Device management status codes
- Device management status codes
- Robotic status codes
- Robotic status codes
- Robotic status codes
- Robotic error codes
- Robotic error codes
- Robotic error codes
- Security services status codes
- Security services status codes
- Security services status codes
- NetBackup alert notification status codes
Media Manager status code 44
Explanation: An attempt to read data from a robotic software daemon or process socket failed.
Recommended Action:
Examine the command output (if available) and the daemon and reqlib debug logs for a more detailed message on the error.
See "Setting Media Manager debug logging to a higher level" in the NetBackup Logging Reference Guide.
Identify the targeted robotic process: look at the robot type and at the robot host on the robotic request or the robot host field of the volume being operated on. Verify that the robotic process to use for robotic control is available and that it handles requests.
See "Media and device management components" in the NetBackup Logging Reference Guide.
Identify the robot control host by checking the device configuration. Only one configured robot control host should exist for each TLD robot. All volumes in the volume configuration should have a robot host that matches the configured robot control host.
Check the system log on the robot control host to see if the robotic process handles requests when communications with it are attempted.
See "Resolving network communication problems with UNIX clients" in the NetBackup Troubleshooting Guide.
See "Resolving network communication problems with PC clients" in the NetBackup Troubleshooting Guide.