Veritas NetBackup™ Status Codes Reference Guide
- NetBackup status codes
- NetBackup status codes
- NetBackup KMS status codes
- NetBackup status codes
- Media Manager status codes
- Media Manager status codes
- Media Manager status codes
- Device configuration status codes
- Device configuration status codes
- Device configuration status codes
- Device management status codes
- Device management status codes
- Device management status codes
- Robotic status codes
- Robotic status codes
- Robotic status codes
- Robotic error codes
- Robotic error codes
- Robotic error codes
- Security services status codes
- Security services status codes
- Security services status codes
- NetBackup alert notification status codes
NetBackup status code: 1299
Explanation: This error occurs if any of the following conditions is not met:
You should specify either
credId
orpkiAttributes
. Do not specify both at the same time.One of the following fields is mandatory:
credId
orpkiAttributes
.The
kmsServerAttributes
field is mandatory and it cannot be blank.The certificate is mandatory and it cannot be blank.
The CA Certificate is mandatory and it cannot be blank.
The private key is mandatory and it cannot be blank.
The operation is not supported for the following KMS type:
NBKMS
.
Recommended Action: Verify the following as needed:
You need to specify either
credId
orpkiAttributes
. Do not specify both at the same time.Verify that you have one of the following mandatory fields:
credId
orpkiAttributes
.Verify that the mandatory field
kmsServerAttributes
is not blank.Review the certificate. The certificate is mandatory and it cannot be blank.
Review the CA Certificate. The CA Certificate is mandatory and it cannot be blank.
Review the private key. The private key is mandatory and it cannot be blank.
Verify that
NBKMS
is not used. The operation is not supported for that KMS type.
Click here to view technical notes and other information on the website about this status code.