Important Update: Cohesity Products Documentation
All Cohesity product documentation are now managed via the Cohesity Docs Portal: https://docs.cohesity.com/HomePage/Content/home.htm. Some documentation available here may not reflect the latest information or may no longer be accessible.
NetBackup™ Access 3360 Appliance Product Description
- About the Access 3360 Appliance
- About the Veritas Access 3360 Appliance
- Features and components of the appliance
- Locating the appliance serial number
- About 3360 compute node drive configurations
- About the compute node front panel USB port
- About the compute node control panel
- About the compute node rear panel
- Standard 3360 Appliance PCIe-based I/O configuration
- About the 5U84 Storage Shelves
- Access 3360 Appliance and 5U84 Storage Shelf cables
- Appendix A. Technical specifications, Environmental/Protocol standards, and Compliance standards
- Index
Multi-mode fiber optic cable
A Veritas &aModel; Appliance compute node communicates with the required 5U84 Primary Storage Shelf through multi-mode fiber optic cables. One end of each fiber optic cable connects to PCIe-based 16Gb Fibre Channel host bus adapters that are installed in the compute node. The other end of the fiber optic cable connects to the 5U84 Primary Storage Shelf's Fibre Channel RAID controller. Both ends of the fiber optic cable use LC connectors.
Fiber optic cables require Small Form-factor Pluggable (SFP+) transceivers, which are provided with each device having Fibre Channel ports. The diagram shows the SFP, labeled 1, and the fiber optic cable which is attached to it, labeled 2.
See Power cables.
See Network cable.
See SAS-3 cable.