Using Generic Simple Storage Service (S3) as a primary storage for Enterprise Vault

To edit an existing Generic S3 partition

1. On the Configuration Vault Store partition, right-click and select Properties.
2. Click the Replication tab. The screen display the option to select When archived files are replicated on the storage and When archived files exist on the storage, and an editable field for scan interval. To edit the field, type directly in the field. The supported scan interval is from 0 minute to 1440 minutes. By default, Enterprise Vault checks whether archived data is replicated or exists every 60 minutes. If you set the scan interval to 0 minutes, partitions are checked only when the backup mode is cleared from the vault store, and when the storage service starts.
3. Click the Advance tab. The screen displays the Access keys, Service host name, Bucket access type, Bucket region, Storage class, Log level, and buffer size.
4. To edit a field, type directly in the field (for example, type a new Access key ID and Secret access key), or select another option from the drop-down list.

   Note:

   To return to the last saved configuration, click Reset.

5. Click Test or Apply to save your changes. The Apply will initiate the Test configuration with the S3 bucket automatically.
6. On the successful Test configuration, restart the storage service.
7. Click Ok.