Veritas NetBackup™ CloudPoint Install and Upgrade Guide

To uninstall CloudPoint

1. Ensure that you have uninstalled the CloudPoint agents from all the hosts that are part of the CloudPoint configuration.

   See Removing the CloudPoint agents.

2. Verify that there are no protection policy snapshots or other operations in progress, and then uninstall CloudPoint by running the following command on the host:

   # sudo docker run -it --rm 
   -v /full_path_to_volume:/full_path_to_volume 
   -v /var/run/docker.sock:/var/run/docker.sock
   veritas/flexsnap-cloudpoint:<version> uninstall

   Replace the following parameters as per your environment:

   Parameter	Description
   <version>	Represents the CloudPoint product version that is installed on the host.
   <full_path_to_volume>	Represents the path to the CloudPoint data volume, which typically is /cloudpoint.

   For example, if the product version is 8.3.0.8549, the command syntax is as follows:

   # sudo docker run -it --rm -v /cloudpoint:/cloudpoint -v /var/run/docker.sock:/var/run/docker.sock veritas/flexsnap-cloudpoint:8.3.0.8549 uninstall

   If using a proxy server, then using the examples provided in the table earlier, the command syntax is as follows:

   # sudo docker run -it --rm -v /cloudpoint:/cloudpoint -e VX_HTTP_PROXY="http://proxy.mycompany.com:8080/" -e VX_HTTPS_PROXY="https://proxy.mycompany.com:8080/" -e VX_NO_PROXY="localhost,mycompany.com,192.168.0.10:80" -v /var/run/docker.sock:/var/run/docker.sock veritas/flexsnap-cloudpoint:8.3.0.8549 uninstall

   Note:

   This is a single command. Ensure that you enter the command without any line breaks.

   The installer begins to unload the relevant CloudPoint container packages from the host. Messages similar to the following indicate the progress status:

   Uninstalling Veritas CloudPoint
   --------------------------------------------
   Stopping flexsnap-mongodb ... done
   Stopping flexsnap-rabbitmq ... done
   Stopping flexsnap-auth ... done
   Stopping flexsnap-coordinator ... done
   Removing flexsnap-mongodb ... done
   Removing flexsnap-rabbitmq ... done
   Removing flexsnap-auth ... done
   Removing flexsnap-coordinator ... done
   Unloading flexsnap-mongodb ... done
   Unloading flexsnap-rabbitmq ... done
   Unloading flexsnap-auth ... done
   Unloading flexsnap-coordinator ... done
   

3. Confirm that the CloudPoint containers are removed.

   Use the following docker command:

   # sudo docker ps -a

4. If desired, remove the CloudPoint container images from the host.

   Use the following docker command to view the docker images that are loaded on the host:

   # sudo docker images -a

   Use the following docker command to remove the CloudPoint container images from the host:

   # sudo docker rmi <image ID>

5. This completes the CloudPoint uninstallation on the host.

   Possible next step is to re-deploy CloudPoint.

   See Installing CloudPoint.