Problem
The /mnt/nbdata/ filesystem fills to 100% quickly once backups start in the environment.
Specifically there are several hundred directories here: /mnt/nbdata/usr/openv/var/proxy_peers, each of them around 0.4 MB in size, this is normal.
Once the partition becomes full the instance will stop accepting connections.
Filesystem Size Used Avail Use% Mounted on
/dev/loop1 194M 190M 0 100% /mnt/nbdata
Error Message
Backups may show the following error in the detailed status:
Received status: 7639 with message Failed to create a peer name mapping.
Cause
In Flex the /mnt/nbdata partition is set to 200MB; this is increased to 1GB in Flex 2.1 and onward, but will not be applied to any instances created while at the Flex version .
Additionally /mnt/nbdata was designed to hold configuration data, not logs.
Solution
Contact Support for assistance resolving this issue. Please reference this article in the Support case to expedite resolution.
This issue is targeted to be fixed in a future release
Related Knowledge Base Articles
References
Was this content helpful?
Translated Content
Please note that this document is a translation from English, and may have been machine-translated. It is possible that updates have been made to the original version after this document was translated and published. Veritas does not guarantee the accuracy regarding the completeness of the translation. You may also refer to the English Version of this knowledge base article for up-to-date information.