Important Update: Cohesity Products Knowledge Base Articles
All Cohesity Knowledge Base Articles are now managed via the Cohesity Support Portal: https://support.cohesity.com/s/searchunify. The Knowledge Base articles available here will not reflect the latest information or may no longer be accessible.
Problem
How does the VCS LDom Agent monitoring work?
Solution
# ldm list-bindings -p LdomName
VERSION1.0
DOMAIN|name=LdomName|state=active|flags=normal|cons=5000|ncpu=3|mem=2147483648|util=100.0|uptime=621112
MAC|mac-addr=00:14:4f:f9:27:09
VCPU
|vid=0|pid=4|util=100|strand=100
|vid=1|pid=5|util=100|strand=100
|vid=2|pid=6|util=100|strand=100
MEMORY
|ra=0x8000000|pa=0x108000000|size=2147483648
VARIABLES
|auto-boot?=false
|boot-device=/virtual-devices@100/channel-devices@200/disk@0
VNET|name=vnet1|dev=network@0|service=primary-vsw0@primary|mac-addr=00:14:4f:fb:ab:b8
|peer=primary-vsw0@primary|mac-addr=00:14:4f:ff:ff:f1
|peer=vnet1@LdomName2|mac-addr=00:14:4f:ff:ff:f4
VDISK|name=vdisk1|vol=LdomName-bootvol@primary-vds0|dev=disk@0|server=primary
VCONS|group=Ldomgroup|service=primary-vcc0@primary|port=5000
For further information on the LDom agent, please refer to the Cluster Server Bundled Agents guide, e.g. for 7.4.2:
Was this content helpful?
Translated Content
Please note that this document is a translation from English, and may have been machine-translated. It is possible that updates have been made to the original version after this document was translated and published. Veritas does not guarantee the accuracy regarding the completeness of the translation. You may also refer to the English Version of this knowledge base article for up-to-date information.